WLAN Transceiver /WLAN Transceiver APP /WLAN Transceiver Controller

IP100H
IP100FS
IP1000C

Full-Duplex Communication That Works Over a Wireless LAN and IP Network*

WLAN Transceiver IP100H
WLAN Transceiver APP IP100FS
WLAN Transceiver Controller IP1000C

Basic Functions

The IP100H IP communication terminal transmits voice and preprogrammed text messages to the IP1000C controller through the wireless LAN access points installed in the IP network (VPN). The controller redirects traffic to the specified terminals. The IP100FS WLAN transceiver app can create a virtual radio and simple dispatch station on a Windows® based PC. The IP100FS can obtain position information (based on using access points) and status information of each terminal.

Full-duplex Communication

With an optional earphone-microphone (HM-153LS, or HM-166LS) or headset (HS-102 with OPC-2359 or HS-85 with OPC-2144), the IP100H can talk and receive at the same time. All users in the system can communicate simultaneously.

Calling Features

The IP100H/IP100FS can make Individual calls, Group conference calls, All calls and Area calls. The unique Area call function allows you to call any user who is accessing the specified access point.

Mixing Function

The mixing function receives multiple user's voices at the same time. One-to-many communication is possible and the efficiency of information sharing increases.

Seamless Roaming

If two or more wireless access points are deployed over an IP network, the IP100H can access the nearest access point and can roam between access points.

Status and Short Data Messaging

The IP100H/IP100FS can send status and short data messages* to other users.

* The IP100H can send only preprogrammed messages.

Scalable System

Deploying wireless access points over an IP network can expand the communication range. Dispersed sites can also be connected over an IP network (VPN). Range is only restricted by your IP network coverage.

High Security

The wireless LAN security protocols (WPA-PSK (TKIP/AES), WPA2-PSK (TKIP/AES)) encrypt your private conversations.

License-Free

Licensing and applications are not required for installation. IEEE 802.11 a/b/g/n standards are used.

Easy Maintenance

The IP1000C programs almost all terminal configurations over the air. Individual PC programming via cable connection is not required.

Other Features

  • Easy system to set up and use
  • Up to 100 users can communicate at the same time
  • Encryption provides extra security
  • Range is only restricted by your IP network coverage
  • No license fee required, no call charges

* Requires either HM-153LS, HM-166LS, HS-102 with OPC-2359 or HS-85 with OPC-2144 for full-duplex operation.

IP100H<IP Communication Terminal>

  • IPX7 waterproof (1m depth water for 30 minutes) for outdoor work or places prone to get wet.
  • Compact 58×95×26.4 mm body and 205g (approximate) lightweight.
  • Vibration alert function for incoming calls.
  • Emergency call with higher priority.
  • Tested to the MIL-STD 810G specifications.

IP100FS<WLAN Transceiver APP>

  • The IP100FS can communicate with IP communication terminals from a PC.
  • The IP100FS can obtain location information of each IP100H based on the access point being used.
  • Can be installed on a Windows® based tablet PC as well as a laptop PC.

IP1000C<WLAN Transceiver Controller>

  • The IP1000C controls all terminal configurations and voice traffic.
  • Capable of controlling up to 100 terminals (including IP100FSs).
  • Links up to 11 IP1000Cs over an IP network (Internet VPN) and increases the number of usable IP100H/IP100FS communication terminals to 1100 units.

* Depending on the IP1000C version.

AP-95M<Wireless Access Point>

  • IEEE 802.11 ac/n/a/g/b standard
  • PoE (Power over Ethernet) capability
  • Optional RS-AP3, Access point management software

IP Phone and Transceiver Interconnection

Interconnection image
The IP communication terminals, radios and telephones can communicate with each other within the doughnut shaped blue ring.

With a VE-PG4 RoIP gateway, the IP advanced radio system can interconnect with an IP phone, LTE, IDAS™ Conventional, Type-D multi-site trunking and analog transceivers.

The VE-PG4 has a built-in controller function (equivalent to the IP1000C function), capable of controlling up to 50 IP communication terminals.

IP100H<IP Communication Terminal>

Wireless standards IEEE 802.11 a/b/g/n
Frequency range*1 2.4–2.4835 GHz, 5.15–5.35, 5.47–5.85 GHz
Dimensions (W×H×D)*2 58×95×26.4mm (with BP-271)
Weight (approx.) 205g (with BP-271 and antenna)
Operating time*3 More than 20 hours (with BP-271)
HF output power Less than 10mW/MHz
Voice Codec G.711 μ-law (64kbps)
AF output power
(10% distortion)
Internal SP 400mW (typ., 16Ω),
External SP 200mW (typ., 8Ω)
Security WEP (64/128-bit),
WPA-PSK (TKIP/AES),
WPA2-PSK (TKIP/AES)
Operating temperature −10°C to +60°C

*1Authorized frequency range and channels may differ depending on country. *2 Projections are not included. *3 Tx: Rx: Stand-by=1 : 1 : 8 duty cycle

Supplied Accessories for IP100H

・BP-271 Li-Ion battery pack
・MB-127 belt clip
・Hand strap
・Antenna
・Antenna cap

IP100FS<WLAN Transceiver APP>(System requirements)

Operating system Windows® 10 (32-bit/64-bit),
Windows® 8.1 (32-bit/64-bit)
(Except for Windows® RT)
CPU Intel® Core™ 2 Duo Processor E6600/2.4GHz or better
Memory 2GB or higher
Hard disk space 1GB of disk space (to save log files)
Audio DirectSound compatible audio
(Frequency response up to 20kHz, sampling rate 48kHz)
Display resolution 1920×1080 pixel recommended
1024×768 pixel minimum
Other USB 2.0 port,
10Mbps or faster Ethernet interface,
speaker, microphone or headset

IP1000C<WLAN Transceiver Controller>

Power supply 100-240V AC (With supplied AC adapter)
Operating temperature 0°C to +40°C
Dimensions (W×H×D)*4 232×38×168mm
Weight (approx.) 750g (Main unit only)
LAN RJ-45 connector × 4
1000BASE-T/100BASE-TX/10BASE-T (Auto MDI/MDI-X)
USB Standard A receptacles ×2
Maintenance console

RS-232C (RJ-11) connector

*4 Projections are not included.

Supplied Accessories for IP1000C

・BC-207S AC adapter
・Cushion sheets
・Ferrite core

AP-95M<Wireless Access Point>

Power supply 12 V DC ±10% or PoE (IEEE802.3af compatible)
Dimensions (W×H×D)*5 162×162×42 mm; 6.4×6.4×1.7 in
Weight (approx.) 520 g; 1.1 lb (Accessories not included)
Cable LAN RJ-45 connector × 1
1000BASE-T/100BASE-TX/10BASE-T
(MDI/MDI-X automatic distinction)
Wireless LAN IEEE 802.11 a/b/g/n/ac
Frequency range*6 2.4–2.4835 GHz, 5.15–5.35, 5.47–5.85 GHz
Security WEP (64/128/152-bit), WPA, WPA2,
WPA-PSK, WPA2-PSK, IEEE 802.1X/EAP
Operating temperature -10 °C to +55 °C; +14 °F to +131 °F

*5 Projections are not included. *6 Authorized frequency range and channels may differ depending on country.

All stated specifications are subject to change without notice or obligation.

Instruction Manual / Guides

Name Model Name Note
Instruction Manual CS-IP100H
Instruction Manual (Ver. 2.30) IP1000C
Precautions IP1000C
Connection Guide IP1000C
Instruction Manual IP100FS

IP ADVANCED RADIO SYSTEM REMOTE COMMUNICATOR

Instruction Manual (Ver.2.20) IP100H
Guide(Ver.2.10) IP100H
DOC (DECLARATION OF CONFORMITY) IP100H
DICHIARAZIONE DI CONFORMITA UE(ITALIANO) IP100H

Firmware / Software

Type Model Name Version Last Update
Cloning software CS-IP100H Ver.2.03 2019.12.27
Firmware IP1000C (100 terminal versions #11 and #12) Version 2.30 2020.07.15
Firmware IP1000C (20 terminal versions #13 and #14) Version 2.30 2020.07.15
Software update IP100FS Version 2.03 2020.07.13