First 3D data of IC-705!
Making QSOs with an IC-705 is absolutely fun, but there is even more to the rig.
Based on "Be Active" philosophy, we have decided to release the 3D data, to support IC-705 users interested in creating original items to customize the radio.
We hope to deepen the joy of your HAM life with the IC-705.
Download IC-705 3D data
*IC-705 3D data is provided in Stl format, which is compatible with numerous 3D modeling software and 3D printers.
HF/50/144/440 MHz Multimode
From HF to 50/144/440 MHz, you can enjoy a variety of bands in the D-STAR DV, SSB, CW, RTTY, AM and FM modes. The IC-705 receives continuously from 30 kHz through the 144 MHz band. You can also enjoy FM broadcast and air band reception.
RF Direct Sampling System
The IC-705 employs an RF direct sampling system, where RF signals are directly converted to digital data. Then processed in the FPGA (Field-Programmable Gate Array), making it possible to simplify the circuit construction as well as reducing internal noise that can mask weak signals.
* The down-conversion IF sampling method is used for 25 MHz and above.
Real-Time Spectrum Scope and Waterfall Display
Performance seen with the IC-7300 and IC-9700 spectrum scope is at the tip of your fingers for field operation. You can quickly see band activity as well as finding a clear frequency, all in the compact radio and not as an expensive add-on. Scroll mode automatically keeps the operating signal within the scope range.
Large Touch Screen Color Display
The large 4.3” color TFT touch LCD, same size as the IC-7300 and IC-9700, offers intuitive operation of functions, settings, and various operational visual aids, such as the band scope, waterfall, and audio scope functions.
One-Touch FT8 Mode Preset
Preset memory offers smooth FT8 mode operation. You can start FT8 mode operation only by selecting [FT8] from PRESET menu. Up to five preset memories can be stored.
Compact and Lightweight Design
BP-272 Li-ion Battery Pack or 13.8 V DC External Power Supply
Maximum Output Power 5 W (BP-272), 10 W (13.8 V DC)
In portable mode, the IC-705 has the maximum output power of 5 W from the BP-272 which can last approximately 3 hours*. This is perfect for true 5 W QRP as well as the 0.5 W QRPp operations. Once you setup with a 13.8 V DC power source, you have up to 10 W.
* TX : RX : standby = 1 : 1 : 8 (The Power Save function ON, in the FM mode)
Utilize WLAN/Bluetooth® technologies for linking and remote control, for a true wireless operation. The VS-3 headset (optional) enables more comfortable operation via Bluetooth®
An internal GPS receiver and antenna enhance your operations by providing location logging*, RX/TX locations via D-PRS , “Near Me” repeater search/scan, QSO recording with metadata*, and internal clock synchronization.
* A microSD memory card is required.
microSD Card Slot
The microSD card slot enables the storage of user profiles, QSO recording, TX voice memory keyer, RTTY logging, GPS data, screen capture, firmware upgrades, and programming.
Micro USB Connector
In addition to the two COM ports, radio control plus audio, the IC-705 can be charged via the micro USB port.
Programmable Speaker Microphone
Enjoy portable operations with the supplied HM-243, programmable speaker microphone. Perfect for operation with the IC-705 safely secured in the optional LC-192 backpack. User assignable buttons put functions like frequency and volume adjustments at the tip of your fingers, without removing your backpack.
Optional Backpack, LC-192, Ideal for Field Operations
Designed to be the "Ultimate", must have accessory for the IC-705, the LC-192 is the perfect utility backpack. Features like a safety strap, with a 1/4”-20 mounting lug to keep the IC-705 from accidentally falling out of the custom radio compartment, to the user adjustable internal panels for custom compartments for antennas, battery packs, or other items necessary for an afternoon SOTA activation.
Side / Rear Panel View
|Frequency coverage (Unit: MHz)||Receiver||
USB, LSB, CW, RTTY, AM, DV, FM, WFM (Rx only)
|No. of memory channels||
Memory channels: 500 channels (100 groups)
Scan edges: 25 channels
Call channels: 4 channels (2 channels × 2 bands)
BNC connector (50Ω)(One connector for all bands)
|Power supply requirement||
13.8 V DC ±15% (with external power supply)
7.4 V DC (with BP-272)
|Operating temp. range||
–10°C to +60°C; +14°F to +140°F
Less than ± 0.5 ppm
(–10°C to +60°C; 14°F to 140°F)
|Current drain||13.8 V DC||7.4 V DC|
TX (Max. power)
Less than 3 A (10 W)
|Less than 2.5 A (5 W)|
|RX (Max. audio)||0.5 A (typical)||0.8 A (typical)|
|RX (Standby)||0.3 A (typical)||0.5 A (typical)|
200×83.5×82 mm; 7.9×3.3×3.2 in (W×H×D, projections not included)
1.1 kg; 2.4 lb (approximate; including BP-272)
* Some frequency bands are not guaranteed.
13.8 V DC
|7.4 V DC|
0.1 to 10 W
|0.1 to 5 W|
|AM||0.025 to 2.5 W||0.025 to 1.25 W|
SSB : Digital PSN modulation
AM : Digital low power modulation
FM : Digital reactance modulation
DV : Digital GMSK modulation
Less than −50 dB (HF)
Less than −60 dB (50 MHz)
Less than −60 dB (144/430 MHz)
|Carrier suppression||More than 50 dB|
More than 50 dB
|Receiver system||0.030 to 24.999 MHz||
RF Direct Sampling
|25.000 MHz and above||
Down Conversion IF Sampling
25.000 MHz and above：38.85 MHz±0.5 MHz
(HF: Preamp-1 ON,
50 MHz: Preamp-2 ON,
144/430/440 MHz: Preamp ON)
0.500 to 1.799 MHz
|1.800 to 29.999 MHz||50 MHz to 54 MHz||144/430/440 MHz|
|SSB/CW（10 dB S/N)||-||0.20 μV||0.15 μV||0.11 μV|
|2.0 μV||1.0 μV||1.0 μV|
|FM（12 dB SINAD）||
0.5 μV (28.000 to 29.700 MHz)
|0.25 μV||0.18 μV|
1.0 μV (28.000 to 29.700 MHz)
|0.63 μV||0.35 μV|
|Selectivity (Filter: SHARP)||SSB（BW=2.4 kHz）||
More than 2.4 kHz/－6 dB
Less than 3.4 kHz/－40 dB
More than 500 Hz/－6 dB
Less than 700 Hz/－40 dB
More than 500 Hz/－6 dB
Less than 800 Hz/－40 dB
More than 6.0 kHz/－6 dB
Less than 10 kHz/－40 dB
More than 12.0 kHz/－6 dB
Less than 22 kHz/－40 dB
|DV（12.5 kHz spacing）||
Less than －50 dB
Spurious and image rejection ratio
HF: More than 70 dB*
|Audio output power||Internal SP||
More than 530 mW (12 Ωload at 10% distortion)
More than 200 mW (8 Ωload at 10% distortion)
Applicable U.S. Military Specifications
Icom makes rugged products that have been tested to and passed the following MIL-STD requirements and strict environmental standards.
|High Temperature||501.5||I, II|
|Low Temperature||502.5||I, II|
Also meets equivalent MIL-STD-810-C, -D -E and -F.
All stated specifications are subject to change without notice or obligation.
- HM-243 Speaker-microphone
- BP-272 Battery pack
- OPC-2421 DC power cable
POWER SUPPLY CABLES
Catalogs / Brochures
Instruction Manual / Guides
|BASIC MANUAL (English)||IC-705|
|BASIC MANUAL (French)||IC-705|
|BASIC MANUAL (Spanish)||IC-705|
|ADVANCED MANUAL (English)||IC-705|
|CI-V REFERENCE GUIDE (English)||IC-705|
|Firmware Update Information||IC-705|
|BASIC MANUAL (German)||IC-705|
|BASIC MANUAL (Italian)||IC-705|
|D-STAR Updating the repeater list||IC-705/IC-9700/IC-7100/ID-4100E/ID-4100A/ID-5100E/ID-5100A/ID-51E/ID-51A/ID-31E/ID-31A/ID-31E PLUS/ID-31A PLUS|
|D-STAR Application Guide||IC-705/IC-9700/IC-7100/ID-4100E/ID-4100A/ID-5100E/ID-5100A/ID-51E/ID-51A/ID-31E/ID-31A/ID-31E PLUS/ID-31A PLUS/RS-MS1A/RS-MS1I/RS-MS3A/ST-4001A/ST-4001I|
|D-STAR Using the GPS Logger function||IC-705/ID-51A/ID-51E/ID-31A/ID-31E/ID-31A PLUS/ID-31E PLUS|
|About the Share Pictures function||IC-9700/IC-705|
|Installation Guide for Windows 10/8.1||USB Driver IC-705/RS-BA1 Version 2|
Icom IC-705 Basic function
Advanced Operation of the IC-705
Introduction for Icom AH-705 Automatic Antenna Tuner
Ingress Protection (IP) Code
Ingress Protection (IP) ratings define the level of protection provided by enclosures to prevent the ingress of foreign objects (dust) and liquid into the electrical equipment.
International Standard IEC 60529 outlines an international classification system that describes the sealing characteristics of electrical equipment.
The classification system uses the “IP” code, or “Ingress Protection” code, to define the level of seal.
An IP number contains two numbers (i.e. IP67) in most instances which relate to the level of protection provided by an enclosure or housing.
Either number may be shown as “X” (i.e. IPX6 / IP7X) to indicate the “X” part is not tested.
Degrees of Solid Particle Protection – 1st Digit
|IP6x||No ingress of dust; complete protection against contact. (Dust tight)|
|IP5x||Protected from the amount of dust that would interfere with normal operation. (Dust protected)|
Degrees of Liquid Ingress Protection – 2nd Digit
|IPx8||Protected against continuous immersion in water.
Depth and duration specified by model.
|IPx7||Protected against temporary immersion in water for 1 m (3.3 ft) for 30 minutes|
|IPx6||Protected against water projected by powerful jets from any direction.
100 L per minute by a powerful jets (12.5 mm) for 3 minutes.
|IPx5||Protected against water projected by jets from any direction.
12.5 L per minute by a nozzle (6.3 mm) for 3 minutes.
|IPx4||Protected against water splashed against the equipment from any direction|