TIME ADJUSTMENT SOFTWARE
ST-4003W
- Download free on the Icom website
Descriptions
・Adjust the transceiver's date/time from a Windows™ PC.
・Compatible with IC-705, IC-7100, IC-7300, IC-7610, IC-7600, IC-7851 (7850), and, IC-9700
Specifications
| Operating System |
Microsoft® Windows® 11 (64 bit) |
|---|
Compatible radios and cables
With this software, you can set the internal clock of the Icom radios listed below. Connect your PC to your radio through a USB cable.
| Compatible radio | Radio’s USB port type | Required item |
|---|---|---|
| IC-705 | Micro-B |
Purchase the proper USB cable that matches your device’s USB port. |
| IC-7100※ | Mini-B | |
| IC-7300 | Type-B | |
| IC-7600 | Type-B | |
| IC-7610 | Type-B | |
| IC-7850/IC-7851 | Type-B | |
| IC-9700 | Type-B |
You can also use the supplied USB cable.
All Mode
Instruction Manual / Guides
| Name | Model Name | Note |
|---|---|---|
| INSTRUCTIONS | ST-4003W |
Firmware / Software
| Type | Model Name | Version | Last Update |
|---|---|---|---|
| USB Driver | IC-705/IC-905/ID-52A/ID-52E/ID-50A/ID-50E | Version 1.30 | 2023.07.28 |
| Time adjustment software | ST-4003W | Version 1.00 | 2021.11.30 |
CloseIngress Protection (IP) Code
Ingress Protection (IP) ratings define the level of protection provided by enclosures to prevent the ingress of foreign objects (dust) and liquid into the electrical equipment.
International Standard IEC 60529 outlines an international classification system that describes the sealing characteristics of electrical equipment.
The classification system uses the “IP” code, or “Ingress Protection” code, to define the level of seal.
An IP number contains two numbers (i.e. IP67) in most instances which relate to the level of protection provided by an enclosure or housing.
Either number may be shown as “X” (i.e. IPX6 / IP7X) to indicate the “X” part is not tested.
Degrees of Solid Particle Protection – 1st Digit
| IP6x | No ingress of dust; complete protection against contact. (Dust tight) |
|---|---|
| IP5x | Protected from the amount of dust that would interfere with normal operation. (Dust protected) |
Degrees of Liquid Ingress Protection – 2nd Digit
| IPx8 | Protected against continuous immersion in water. Depth and duration specified by model. |
|---|---|
| IPx7 | Protected against temporary immersion in water for 1 m (3.3 ft) for 30 minutes |
| IPx6 | Protected against water projected by powerful jets from any direction. 100 L per minute by a powerful jets (12.5 mm) for 3 minutes. |
| IPx5 | Protected against water projected by jets from any direction. 12.5 L per minute by a nozzle (6.3 mm) for 3 minutes. |
| IPx4 | Protected against water splashed against the equipment from any direction |
