2.3” Large High Visibility LCD
2.3” large, high contrast and full dot-matrix LCD ensures good readability under direct sunlight. Large compass screens and large character size provide at-a-glance information.

Menu screen

Pop-up window for
position check

Navigation screen
Slimmest* Buoyant DSC Radio
By adopting a flat sheet keypad, at 38.5 mm the IC-M93D EURO is the slimmest buoyant DSC handheld radio in the world. Fits comfortably in your palm for ease of use.
* As of June 2016, researched by Icom.
Intuitive User Interface
For an operator not familiar with DSC radio operation, the combination of the four directional keypad and soft keys provides straight-forward operation of all functions.
Built-in Class H DSC with a CH70 Receiver

A dedicated DSC receiver continuously monitors CH70. Distress calls can be made with the rear panel button.
Float’n Flash and MOB Auto Set Function
The IC-M93D EURO floats and flashes on the water. Pressing the distress button while Float’n Flash is working will transmit the MOB distress signal, rather than the plain undesignated one for better protection of sailors.
Integrated GNSS Receiver
The integrated GNSS receiver provides your location, bearing and speed with fast-setup time and pinpoint accuracy by using information from GPS, GLONASS, QZSS and SBAS.
Active Noise Cancelling
Active Noise Cancelling digitally removes background noise from both transmit and receive audio and provides clear communication in a noisy maritime environment.
Active noise cancelling video:
Comes with Rapid Charger, BC-220
The supplied rapid charger, BC-220, charges the BP-285 in 3 hours (approximately).
Other Features
- IPX7 waterproof (1 m depth of water for 30 minutes)
- Navigation function from current position to the specified waypoint
- 50 waypoint memories with alphanumeric name for navigation
- Dual/Tri-watch function for monitoring CH16 and/or call channel
- Battery indicator shows remaining battery power in four levels
- Favorite channel function for quick access to often used channels
- AquaQuake™ draining function clears water away from speaker grill
- Support 4-digit channels
- When the HM-165 is connected to the IC-M93D EURO, the HM-165 and the radio floats on the water
General
Frequency range | Tx | 156.000–161.450 MHz | |
---|---|---|---|
Rx | 156.000–163.425 MHz | ||
Rx (CH70) | 156.525 MHz | ||
Usable channel groups | INT, USA*, ATIS* channels * Available depending on version |
||
Type of emission | 16K0G3E (FM), 16K0G2B (DSC) | ||
Current drain (at 7.2 V DC) |
TX | (5.0 W output) | 1.5 A (approx.) |
(1.0 W output) | 700 mA (approx.) | ||
RX | (Internal SP, Max. audio) | 450 mA (approx.) | |
(External SP, Max. audio) | 250 mA (approx.) | ||
Operating temperature range | –15°C to +55°C | ||
Antenna impedance | 50 Ω | ||
Dimensions (W×H×D) (Projections not included) |
57.0×144.6×38.5 mm | ||
Weight (approximately) | 300 g (With BP-285, FA-SC59V, MB-133) |
Transmitter
Output power (Hi/Low) | 5 W/1 W |
---|---|
Max. frequency deviation | ±5.0 kHz |
Frequency stability | ±1.5 kHz |
Spurious emissions | 0.25 μW |
Receiver
Sensitivity (at 20 dB SINAD) DSC receiver (at 1% BER) |
–6 dBμ emf typical –5 dBμ emf typical |
|
---|---|---|
Squelch sensitivity (Threshold) | –6 dBμ emf typical | |
Adjacent channel selectivity DSC receiver (at 1% BER) |
70 dB 73 dBμ emf typical |
|
Spurious response DSC receiver (at 1% BER) |
70 dB 73 dBμ emf typical |
|
Intermodulation DSC receiver (at 1% BER) |
68 dB 68 dBμ emf typical |
|
Hum and noise | 40 dB | |
Audio output power (at 10% distortion) |
Internal SP | 900 mW typical (12 Ω load at 1 kHz) |
External SP | 200 mW (8 Ω load) |
Measurements made in accordance with EN302-885-1 and IEC 62238. All stated specifications are subject to change without notice or obligation.
Applicable U.S. Military Specifications & IP Rating
Standard |
MIL-810 G | |
---|---|---|
Method | Procedure | |
Low Pressure |
500.5 |
I, II |
High Temperature |
501.5 |
I, II |
Low Temperature |
502.5 |
I, II |
Temperature Shock |
503.5 |
I-C |
Solar Radiation |
505.5 |
I |
Rain Blowing/Drip |
506.5 |
I, III |
Humidity |
507.5 |
II |
Salt Fog |
509.5 |
- |
Dust Blowing |
510.5 |
I |
Immersion |
512.5 |
I |
Vibration |
514.6 |
I |
Shock |
516.6 |
I, IV |
Also meets equivalent MIL-STD-810-C, -D, -E and -F.
Ingress Protection Standards | |
---|---|
Water |
IPX7 (Waterproof protection) |
All stated specifications are subject to change without notice or obligation.
Supplied Accessories
- AC adapter, BC-123SE/SUK*
- Battery charger, BC-220
- Battery pack, BP-285
- Belt clip, MB-133
- Antenna, FA-SC59V
- Hand strap
* May differ depending on version.
MICROPHONES
BATTERIES
CHARGERS
POWER SUPPLY CABLES
BELT CLIPS
BELT HANGERS
ANTENNAS
Catalogs / Brochures
Brochures Name | Size |
---|---|
IC-M93D EURO | 1.24MB |
Instruction Manual / Guides
Name | Model Name | Note |
---|---|---|
Basic Manual (German/Spanish/French/Italian) | IC-M93D EURO | |
DOC (DECLARATION OF CONFORMITY) | IC-M93D EURO | |
DICHIARAZIONE DI CONFORMITA UE(ITALIANO) | IC-M93D EURO | |
Instruction Manual (English) | IC-M93D/IC-M93D EURO |



Ingress Protection (IP) Code
Ingress Protection (IP) ratings define the level of protection provided by enclosures to prevent the ingress of foreign objects (dust) and liquid into the electrical equipment.
International Standard IEC 60529 outlines an international classification system that describes the sealing characteristics of electrical equipment.
The classification system uses the “IP” code, or “Ingress Protection” code, to define the level of seal.
An IP number contains two numbers (i.e. IP67) in most instances which relate to the level of protection provided by an enclosure or housing.
Either number may be shown as “X” (i.e. IPX6 / IP7X) to indicate the “X” part is not tested.


Degrees of Solid Particle Protection – 1st Digit
IP6x | No ingress of dust; complete protection against contact. (Dust tight) |
---|---|
IP5x | Protected from the amount of dust that would interfere with normal operation. (Dust protected) |
Degrees of Liquid Ingress Protection – 2nd Digit
IPx8 | Protected against continuous immersion in water. Depth and duration specified by model. |
---|---|
IPx7 | Protected against temporary immersion in water for 1 m (3.3 ft) for 30 minutes |
IPx6 | Protected against water projected by powerful jets from any direction. 100 L per minute by a powerful jets (12.5 mm) for 3 minutes. |
IPx5 | Protected against water projected by jets from any direction. 12.5 L per minute by a nozzle (6.3 mm) for 3 minutes. |
IPx4 | Protected against water splashed against the equipment from any direction |
