8.33 kHz and 25 kHz Channel Spacing
1500 mW Loud Audio Provides Clear Communications

6 W (PEP) /1.8 W (Carrier) RF Output Power
Built-in Bluetooth® for Hands-Free Operation*
* Bluetooth operation depending on the transceiver version.
Large Capacity Battery Pack Provides 17 hours* of Long Battery Life
* With BP-280. Typical operation with
TX : RX : Standby = 5:5:90. (Bluetooth OFF, backlight OFF)
Compact, Waterproof Durable Body (IP67/54 and MIL-STD-810-G)

LCD and Key Backlight for Night Time Operation

Compatible* with Third-Party Aviation Headsets
* Optional headset adapter OPC-2401 required.
Other Features
- Auto Noise Limiter (ANL) for noise reduction
- Side Tone function
- Internal VOX capability
- 200 memory channels with names up to 8 characters
- BNC type antenna connector
Bluetooth® connection has not been tested for all Bluetooth® compatible devices with this product. This does not guarantee that all devices will work with this product.
General
Frequency range | TX/RX : 118.000–136.992 MHz | ||
---|---|---|---|
Number of memory channels | 200 channels | ||
Channel spacing | 8.33 kHz*/25 kHz (* May differ depending on the country.) | ||
Type of emission | 6K80A3E, 5K00A3E | ||
Power supply requirement | 7.2 V DC | ||
Current drain (approximate) | TX High | 1.8 A | |
RX | Stand-by | 65 mA typical | |
Max. audio | 650 mA | ||
Antenna impedance | 50 Ω (BNC type antenna connector) | ||
Operating temperature range | –20°C to +55°C | ||
Dimensions (W×H×D) (Projections not included) |
52.2 × 111.8 × 34.1 mm (with BP-280) | ||
Weight (approximate) | 257 g (with BP-280) |
Transmitter
Output power (at 7.2 V DC) | 6.0 W (PEP), 1.8 W (carrier) | |
---|---|---|
Audio harmonic distortion | Less than 10% (at 85% + 3 dB modulation) | |
Harmonics spurious emissions | Less than –36 dBm (Except for operating frequency ±1 MHz.) |
|
Frequency stability | ±1 ppm |
Receiver
Intermediate frequencies |
46.35 MHz (1st), 450 kHz (2nd) |
|
---|---|---|
Sensitivity | Less than 0 dBμ (at 12 dB SINAD with CCITT) |
|
Squelch sensitivity (Threshold) | Less than 0 dBμ | |
Spurious response | More than 70 dB | |
Hum and noise | More than 40 dB (at 90% modulation) | |
Audio output power | INT SP | 1500 mW typical |
EXT SP | More than 350 mW (AM 8 Ω 60% modulation at 10% distortion) |
|
External speaker connector | 3 conductor 3.5 (d) mm |
Measurements made in accordance with EN300 676-2.
Applicable U.S. Military Specifications
Standard |
MIL-810 G | |
---|---|---|
Method | Procedure | |
Low Pressure | 500.5 | I, II |
High Temperature | 501.5 | I, II |
Low Temperature | 502.5 | I, II |
Temperature Shock | 503.5 | I-C |
Solar Radiation | 505.5 | I |
Rain Blowing/Drip | 506.5 | I, III |
Humidity | 507.5 | II |
Salt Fog | 509.5 | – |
Dust Blowing | 510.5 | I |
Immersion | 512.5 | I |
Vibration | 514.6 | I |
Shock | 516.6 | I, IV |
Also meets equivalent MIL-STD-810 -C, -D, -E and -F.
Applicable IP Rating
Ingress Protection Standard | |
---|---|
Dust and Water | IP67/IP54 |
Supplied Accessories
・ BP-280 battery pack
・ BC-213 rapid charger
・ BC-242 AC adapter
・ FA-B02AR antenna
・ MB-133 belt clip
・ Hand strap
(* Not supplied, depending on the transceiver version.)
MICROPHONES
CHARGERS
AC ADAPTERS
POWER SUPPLY CABLES
MOUNTING BRACKETS
BELT CLIPS
BELT HANGERS
ANTENNAS
SOFTWARE
PROGRAMMING/DATA CABLES
ADAPTER CABLES
Catalogs / Brochures
Brochures Name | Size |
---|---|
IC-A16E | 1.63MB |
Aviation Radios | 2.31MB |
Instruction Manual / Guides
Name | Model Name | Note |
---|---|---|
BASIC MANUAL | IC-A16/IC-A16E | |
FULL MANUAL | IC-A16/IC-A16E | |
BASIC MANUAL(GERMAN/SPANISH/FRENCH/ITALIAN) | IC-A16E | |
DICHIARAZIONE DI CONFORMITA UE (ITALIANO) | IC-A16E (Built-in Bluetooth unit) | |
DOC (DECLARATION OF CONFORMITY) | IC-A16E (Built-in Bluetooth unit) | |
DICHIARAZIONE DI CONFORMITA UE (ITALIANO) | IC-A16E (Non-Bluetooth unit) | |
DOC (DECLARATION OF CONFORMITY) | IC-A16E (Non-Bluetooth unit) |



Ingress Protection (IP) Code
Ingress Protection (IP) ratings define the level of protection provided by enclosures to prevent the ingress of foreign objects (dust) and liquid into the electrical equipment.
International Standard IEC 60529 outlines an international classification system that describes the sealing characteristics of electrical equipment.
The classification system uses the “IP” code, or “Ingress Protection” code, to define the level of seal.
An IP number contains two numbers (i.e. IP67) in most instances which relate to the level of protection provided by an enclosure or housing.
Either number may be shown as “X” (i.e. IPX6 / IP7X) to indicate the “X” part is not tested.


Degrees of Solid Particle Protection – 1st Digit
IP6x | No ingress of dust; complete protection against contact. (Dust tight) |
---|---|
IP5x | Protected from the amount of dust that would interfere with normal operation. (Dust protected) |
Degrees of Liquid Ingress Protection – 2nd Digit
IPx8 | Protected against continuous immersion in water. Depth and duration specified by model. |
---|---|
IPx7 | Protected against temporary immersion in water for 1 m (3.3 ft) for 30 minutes |
IPx6 | Protected against water projected by powerful jets from any direction. 100 L per minute by a powerful jets (12.5 mm) for 3 minutes. |
IPx5 | Protected against water projected by jets from any direction. 12.5 L per minute by a nozzle (6.3 mm) for 3 minutes. |
IPx4 | Protected against water splashed against the equipment from any direction |
