Industry First Multi-Band 144 MHz to Microwave Transceiver!
Explore the World of Microwave
The IC-905 is the industry's first microwave rig in the 144, 430/440, 1200, 2400, 5600 MHz and 10 GHz* bands. Multi-mode operation including SSB, AM, FM, D-STAR DV/DD and FM-TV (Amateur TV). Output power is 10 W on 144, 430/440, 1200 MHz, 2 W on 2400, 5600 MHz and 0.5 W on 10 GHz.
* CX-10G is required for 10 GHz operation
Separate Controller and RF Unit Configuration
The IC-905 is the industry’s first super efficient microwave base station with the RF unit designed to be at the base of the antenna, rather than in the shack. This design eliminates signal loss due to costly, long coax feed line runs found in legacy SHF designs. Optional 50 m (164 ft) or 20 m (65.6 ft) controller cable is available with the IC-905.
Less Signal Loss
With the RF unit mounted at the antenna, transmit and receive signals are at their maximum efficiency as the coax feed line is measured in inches rather than feet, keep signal loss to a minimum. This is possible due to the controller cable providing digital communications between the controller and RF units.
Power Supplied through the Controller Cable
The DC power is supplied from the controller to the RF unit through the controller cable, making it possible to supply power with a low loss. Moreover, optional CX-10G’s power is supplied from the IC-905 RF unit.
GPS-Controlled Oscillator for Ultimate Frequency Stability
Frequency accuracy and stability are required for SHF band operation. Even with a high-performance OCXO, the frequency gradually changes due to temperature and aging. To solve this problem, the IC-905 uses a high-precision 1 pulse-per-second (1 PPS) clock signal from an internal GPS (GNSS) receiver to enable advanced frequency control.
Wideband 50 MHz Span
Real-time Spectrum Scope
A high-performance real-time spectrum scope and waterfall display are built in. The real-time spectrum scope can be adjusted for Center, Fixed, and Scroll mode, and it covers a wide bandwidth of up to 50 MHz span.
ATV (Amateur TV) Mode
The IC-905 is compatible with the ATV (FM-TV, NTSC, PAL or SECAM) mode. With an analog camera connected, the IC-905 can transmit video, and receive a real-time video. Furthermore, received videos can be monitored on an external display connected through AV-output connector.
Icom Common User Interface
The controller of the IC-905 was designed based on the compact IC-705 and utilizes Icom’s Common User Interface system used in Icom’s touch screen transceivers.
Full D-STAR Functions
DV, DD mode, DR function, Terminal mode, and Access Point mode enable easy use of D-STAR. It is also possible to send, receive, and view received pictures with the IC-905.
Optional 10 GHz Transverter, CX-10G
The CX-10G transverter provides 10 GHz operation by converting to a 2400 MHz IF signal. 10 GHz operation becomes more approachable and easier to work. The CX-10G is in bypass mode when the use of the 2400 MHz band.
A Variety of Optional Antennas
Optional Collinear antennas for each bands, 2400, 5600 MHz and 10 GHz are available. Additionally, high-performance parabolic antenna for 10 GHz is also available.
Other Features
- SD card slot
- USB Type-C connection for PC and mobile connectors
- Power Amp thermal protection function
- ⊿TX, RIT and AFC (Automatic Frequency Control) functions
- One-Touch FT8 Mode Preset
- Quick Data mode setting for SSTV, RTTY, PSK31, JT65B and FT8
- AMPS hole pattern and 1/4-20 tripod mount for controller unit
- Two call channels for each band (2×6 bands)
- 500 memory channels divided into up to 100 groups
- 50 scan edges, 2500 repeater memories and 300 GPS memories
Side/Rear Panel View
Controller
RF Unit
GENERAL
Frequency coverage | USA version | 144 ~ 148 MHz, 430 ~ 450 MHz, 1240 ~ 1300 MHz, 2300 ~ 2309.999999, 2390.000001 ~ 2450 MHz, 5650 ~ 5925 MHz |
---|---|---|
Mode | SSB, CW, AM, FM, RTTY, DV, DD*1, ATV*1 | |
Power supply requirement | 13.8 V DC ±15% (Controller unit) | |
Antenna impedance | 50 Ω | |
Operating temperature range | Controller unit | 0°C ~ 50°C, 32 ˚F ~ 122 ˚F |
RF Unit | –10°C ~ 55°C, 14 ˚F ~ 131 ˚F | |
Frequency stability | Less than ±65 ppb (Total deviation) GPS-Controlled Oscillator |
|
Current drain (at 13.8 V DC) |
RX Max. audio/Standby | Less than 3 A/2 A (typical) |
TX Max. power | Less than 5.5 A | |
Dimensions (W x H x D) | Controller unit | 200 x 83.5 x 82 mm; 7.9 x 3.3 x 3.2 in |
RF unit | 172 x 87 x 210 mm; 6.8 x 3.4 x 8.3 in | |
Weight (Approximate) | Controller unit | 940 g; 2.1 lb. (supplied accessories not included) |
RF unit | 3.2kg; 7.1 lb. (supplied accessories not included) |
*1 1200 MHz and above.
TRANSMITTER
Output power | 144, 430/440 MHz | SSB, CW, FM, RTTY, DV : 10 W | AM : 2.5 W |
---|---|---|---|
1200 MHz | SSB, CW, FM, RTTY, DV, DD, ATV : 10 W | AM : 2.5 W | |
2400, 5600 MHz | SSB, CW, FM, RTTY, DV, DD, ATV : 2 W | AM : 0.5 W | |
Modulation system | SSB | Digital PSN modulation | |
FM | Digital Reactance modulation | ||
AM | Digital Low Power modulation | ||
DV, DD | Digital GMSK modulation | ||
ATV | Digital Reactance modulation | ||
Spurious emission | 144, 430/440 MHz | Less than -60 dBc | |
1200 MHz | Less than -53 dBc | ||
2400, 5600 MHz | Less than -46 dBc | ||
Microphone impedance | 2.2 kΩ |
RECEIVER
Receiver system | 144, 430/440 MHz | RF Direct Sampling | |
---|---|---|---|
1200, 2400, 5600 MHz | Down Conversion IF Sampling | ||
IF Frequency | 1200 MHz | 1st IF: 331 ~ 371 MHz | |
2400, 5600 MHz | 1st IF: 914 MHz band, 2nd IF: 346 MHz band | ||
Sensitivity | 144, 430, 1200, 2400 MHz bands | 5600 MHz band | |
SSB, CW (Filter: SOFT) (at 10 dB S/N) | Less than -19 dBμV (0.11 μV) | Less than -16 dBμV (0.15 μV) | |
AM (at 10 dB S/N) | Less than 0 dBμV (1.0 μV) | Less than 3 dBμV (1.4 μV) | |
FM (at 12 dB SINAD) | Less than -15 dBμV (0.17 μV) | Less than -12 dBμV (0.25 μV) | |
DV (at 1% BER (PN9) | Less than -9 dBμV (0.35 μV) | Less than -6 dBμV (0.50 μV) | |
DD (at 1% BER (PN9) | Less than 4 dBμV (1.58 μV) (1200, 2400 MHz bands only) |
Less than 7 dBμV (2.23 μV) | |
Selectivity | SSB (BW=2.4 kHz, Filter: SHARP) | More than 2.4 kHz/-3 dB Less than 3.6 kHz/-60 dB |
|
CW (BW=500 Hz) | More than 500 Hz/-3 dB Less than 700 Hz/-60 dB |
||
RTTY (BW=500 Hz) | More than 500 Hz/-3dB Less than 700 Hz/-60 dB |
||
AM (BW=6 kHz) | More than 6.0 kHz/-3 dB Less than 15 kHz/-60 dB |
||
FM (BW=15 kHz) | More than 12.0 kHz/-6 dB Less than 20 kHz/-60 dB |
||
DV (Ch. Spacing=12.5 kHz) | Less than -50 dB | ||
DD (Ch. Spacing=300 kHz) | Less than -40 dB | ||
Audio output power | Internal SP | More than 530 mW (12 Ω, 1 kHz, 10% distortion) | |
External SP | More than 200 mW (8 Ω, 1 kHz, 10% distortion) | ||
AV-OUT | More than -6 dBV (600 Ω, Max. power) 1 V p-p typ. (Test pattern) |
||
AF Output Impedance | External SP | 8 Ω | |
AV-OUT | 600 Ω (Audio), 75 Ω (Video) |
*Specifying PREAMP ON in 144, 430/440, and 1200 MHz bands. No switching function for PREAMP ON/OFF in 2400 and 5600 MHz bands.
* All stated specifications are subject to change without notice or obligation.
Applicable IP Rating
Ingress Protection Standard | |
---|---|
IC-905 RF Unit | IP55 (Dust-protection and water jet resistance) |
IC-905 Supplied Accessories
- Accessory connectors
- CW key plug
- OPC-2488, power supply cable
- Controller cable (5 m, 16.4 feet)
- GPS antenna
- HM-243, Speaker-microphone
- Cushion sheet
- RF unit bracket kit
- U-bolt clamp kit
- Spare fuse
MICROPHONES
CONTROL CABLES
DESKTOP STAND
ANTENNAS
SOFTWARE
TRANSVERTER
News
Catalogs / Brochures
Brochures Name | Size |
---|---|
HAM Radios and Receivers | 6.90MB |
IC-905_USA | 1.50MB |
Instruction Manual / Guides
Name | Model Name | Note |
---|---|---|
INSTRUCTIONS | AH-109PB | |
PRECAUTIONS (German/Spanish/French/Italian) | AH-109PB | |
INSTRUCTIONS | AH-24/AH-56/AH-100 | |
PRECAUTIONS (German/Spanish/French/Italian) | AH-24/AH-56/AH-100 | |
INSTRUCTIONS | CS-905 | |
DICHIARAZIONE DI CONFORMITA UE (ITALIANO) | CX-10G | |
DOC (DECLARATION OF CONFORMITY) | CX-10G | |
INSTRUCTIONS | CX-10G | |
PRECAUTIONS (Spanish/French) | CX-10G | |
PRECAUTIONS (German/Italian) | CX-10G | |
Firmware Update Information | IC-905 | |
BASIC MANUAL (Italian) | IC-905 | |
BASIC MANUAL (German) | IC-905 | |
CI-V REFERENCE GUIDE (English) | IC-905 | |
BASIC MANUAL (Spanish) | IC-905 | |
BASIC MANUAL (French) | IC-905 | |
ADVANCED MANUAL (English) | IC-905 | |
CONNECTION GUIDE (English) | IC-905 | |
BASIC MANUAL (English) | IC-905 | |
About the Share Pictures function | IC-9700/IC-705/IC-905 | |
D-STAR Application Guide | ID-52A PLUS/ID-52E PLUS/ID-52A/ID-52E/IC-705/IC-905/IC-9700/IC-7100/ID-4100E/ID-4100A/ID-5100E/ID-5100A/ID-51E/ID-51A/ID-31E/ID-31A/ID-31E PLUS/ID-31A PLUS/RS-MS1A/RS-MS1I/RS-MS3A/ST-4001A/ST-4001I/ID-50A/ID-50E | |
D-STAR Updating the repeater list | ID-52A PLUS/ID-52E PLUS/ID-52E/ID-52A/IC-705/IC-905/IC-9700/IC-7100/ID-4100E/ID-4100A/ID-5100E/ID-5100A/ID-51E/ID-51A/ID-31E/ID-31A/ID-31E PLUS/ID-31A PLUS/ID-50A/ID-50E | |
INSTRUCTIONS | ST-4001A/ST-4001I | |
INSTRUCTIONS | ST-4001W | |
Installation Guide for Windows 11/10 | USB Driver IC-705/IC-905/ID-52A/ID-52E/ID-50A/ID-50E/ID-52A PLUS/ID-52E PLUS/IC-7760/RS-BA1 Version 2 |
Firmware / Software
Type | Model Name | Version | Last Update |
---|---|---|---|
Programming software | CS-905 | Version 1.20 | 2024.03.29 |
Firmware | CX-10G | Version 1.02 | 2023.11.30 |
USB Driver | IC-705/IC-905/IC-R15/ID-52A/ID-52E/ID-50A/ID-50E/ID-52A PLUS/ID-52E PLUS | Version 1.50 | 2024.07.12 |
USB Driver | IC-705/IC-905/IC-R15/ID-52A/ID-52E/ID-50A/ID-50E/ID-52A PLUS/ID-52E PLUS/IC-7760 | Version 1.60 | 2024.08.28 |
USB Driver | IC-705/IC-905/ID-52A/ID-52E | Version 1.20 | 2023.04.07 |
USB Driver | IC-705/IC-905/ID-52A/ID-52E/ID-50A/ID-50E | Version 1.30 | 2023.07.28 |
Firmware | IC-905 | Version 1.15 | 2024.03.29 |
Repeater List, GPS Data | IC-905 | 20230809 | 2023.08.09 |
Control software | RS-BA1 Version 2 | Version 2.70 | 2024.08.28 |
Icom IC-905 Introduction Video
IC-905 ATV Mode
IC-905 Realtime Spectrum Scope
Ingress Protection (IP) Code
Ingress Protection (IP) ratings define the level of protection provided by enclosures to prevent the ingress of foreign objects (dust) and liquid into the electrical equipment.
International Standard IEC 60529 outlines an international classification system that describes the sealing characteristics of electrical equipment.
The classification system uses the “IP” code, or “Ingress Protection” code, to define the level of seal.
An IP number contains two numbers (i.e. IP67) in most instances which relate to the level of protection provided by an enclosure or housing.
Either number may be shown as “X” (i.e. IPX6 / IP7X) to indicate the “X” part is not tested.
Degrees of Solid Particle Protection – 1st Digit
IP6x | No ingress of dust; complete protection against contact. (Dust tight) |
---|---|
IP5x | Protected from the amount of dust that would interfere with normal operation. (Dust protected) |
Degrees of Liquid Ingress Protection – 2nd Digit
IPx8 | Protected against continuous immersion in water. Depth and duration specified by model. |
---|---|
IPx7 | Protected against temporary immersion in water for 1 m (3.3 ft) for 30 minutes |
IPx6 | Protected against water projected by powerful jets from any direction. 100 L per minute by a powerful jets (12.5 mm) for 3 minutes. |
IPx5 | Protected against water projected by jets from any direction. 12.5 L per minute by a nozzle (6.3 mm) for 3 minutes. |
IPx4 | Protected against water splashed against the equipment from any direction |