Intuitive Touch Screen Interface
The innovative touch screen interface provides quick and smooth operation for setting and editing various functions and memories.
One Touch Selection
For example, if you want to change the operating band, tap the frequency on the display. The band keys will be shown to select the operating band. Touching the multi-function meter indicator for 1 second will quickly change the transmit meter functions.
Straight Forward Operation
Just tap the mode, filter, function etc, you need to change. The touch screen responds naturally, changing your settings.
Entering frequency, callsign or editing memory channels has never been this easy. The software keypad on the touch screen allows you to input alphanumeric characters incredibly quickly.
Touch Screen Control Portal
The radio control head features a large, multi-function, "touch screen" dot-matrix LCD display that is positioned for easy view and operation. The controller is compact in size, making it ideal for limited vehicle or desktop space.
Resistive Touch Screen
The 48.6×75.9 mm in large resistive touch screen display can be operated even while wearing gloves.
Controller Mounted Speaker and Jacks
The unique remote head design is perfect for providing loud, clear audio as well as jacks for an external speaker/headphones as well as a key and microphone.
HF/50/70/144/430 MHz Multi-band, Multi-mode
The IC-7100 fully covers the HF, 50, 70, 144, 430 MHz amateur bands in multiple modes, providing 100 W on HF/50 MHz bands, 50 W on 70/144 MHz bands and 35 W on 430 MHz band.
Digital Features Controlled by the IF DSP
A high-performance 32-bit floating point IF DSP delivers rich digital signal processing features, including digital IF filter, digital twin PBT, noise reduction, CW auto tune, etc. Those digital features work on all bands from HF to V/UHF bands.
DSP Controlled AGC Function Loop
The digital signal processing is incorporated into the AGC function loop. The results of signal processing provide feedback to the AGC function. The AGC function works on the intended signal and produces a constant audio output. The AGC time constants are flexibly adjustable from slow, middle, fast (or AGC off) for each operating mode.
D-STAR DV Mode (Digital Voice + Data)
The IC-7100 provides D-STAR DV mode digital voice and low speed data communication.
D-STAR System Introduction
Find the D-STAR system introduction and features from here.
DR (D-STAR Repeater) Mode Operation
The DR mode operation makes the D-STAR operation simple and straight forward, even if you are new to D-STAR operation.
Near Repeater Function
With an external, 3rd party GPS*, search the internal database based on your location.
* External GPS receiver or manual data input required.
SD Memory Card Slot for Saving Data
When used with an SD card, the SD card can store various contents including voice memory, memory channels, D-STAR repeater memories and other personal settings can be saved to the SD card and can be loaded to the transceiver.
Easy Vehicle Mounting with Optional MBF-1
The combination of the optional MBF-1 suction cup mounting base and MBA-1 controller bracket provides easy tilt and swivel adjustments for mobile operation. The large suction cup can mount to dashboards or other flat surfaces and can be removed easily.
Optional RS-BA1 IP Remote Control Software
The optional RS-BA1 software allows you to operate the IC-7100 from a remote PC over the Internet or local home network.
Built-in RTTY Functions
The built-in RTTY decoder allows you to instantly read an RTTY message on the display. No external TNC or PC required for reading. The eight RTTY memories can memorize and transmit often used RTTY sentences. The RTTY memory is 70 character per memory channel.
RS-MS1A, Free Download Android™ Application
The RS-MS1A allows you to connect your Android™ device to the IC-7100*. Text messages and pictures can be sent and received with your Android™ device through D-STAR DV mode.
* The optional OPC-2350LU data cable is required to connect to an Android™ device.
- CW full break-in, CW receive reverse, CW auto tuning
- Optional multi-function microphone, HM-151
- Band scope and SWR graphic display
- RF speech compressor controlled by the DSP
- Voice memory function
- Multi-function Meter
- 495 regular, 4 call, 6 scan edge and 900 DR mode repeater channels
- 4 channels TX voice memories
- ±0.5ppm frequency stability
- Auto reply function*
- Digital callsign squelch and digital code squelch*
- 12kHz IF output for DRM (Digital Radio Mondiale) receive
* D-STAR DV mode only
Rear Panel View (Main unit)
|Mode||USB, LSB, CW, RTTY, AM, DV, FM,
|No of memory channels||495 regular, 4 call, 6 scan edges,
900 D-STAR repeater channels
(one each for HF/50/70 MHz and 144/430 MHz, 50 Ω)
|Operating Temp. range||−10°C to +60°C|
|Frequency stability||±0.5 ppm
(0°C to +50°C @ 430 MHz)
|Power supply requirement||13.8 V DC ±15%|
(at 13.8 V DC)
|Tx:||22 A (HF/50/70 MHz)
16 A (144/430 MHz)
|RX:||1.2 A/0.9 A (Max. audio/standby)|
projections not included)
|Main unit||167×58×225 mm|
|Main unit||2.3 kg|
*1 Showing EUR(#03) version. Varies depending on the version.
*2 Some frequency bands are not guaranteed.
(at 13.8 V DC)
||HF/50 MHz: 2–100W
70 MHz: 2–50 W
144 MHz: 2–50 W
430 MHz: 2–35 W
|AM||HF/50 MHz: 1–30 W
70 MHz: 1–15 W
|Modulation system||SSB||Digital P.S.N. modulation|
|AM||Digital low power modulation|
|FM||Digital phase modulation|
|DV||GMSK digital phase modulation|
|Spurious emissions||Less than −50 dB (HF bands)
Less than −63 dB (50MHz)
Less than −60 dB (70/144/430 MHz)
|Carrier suppression||More than 50 dB|
|Unwanted sideband||More than 50 dB|
|Intermediate frequencies||SSB/CW/AM/FM/RTTY/DV||124.487 MHz, 455 kHz, 36 kHz|
|WFM||134.732 MHz, 10.700 MHz|
(HF: Preamp-1 ON, 50/70 MHz: Preamp-2 ON,
144/430 MHz: Preamp ON)
|SSB/CW (BW=2.4 kHz at 10 dB S/N)||1.8–29.995 MHz: 0.15 μV
50 MHz: 0.12 μV
70 MHz: 0.15 μV
144/430 MHz: 0.11 μV
|AM (BW=6 kHz at 10 dB S/N)||0.5–1.8 MHz: 13 μV
1.8–29.995 MHz: 2 μV
50 MHz: 1 μV
70 MHz: 1 μV
144/430 MHz: 1 μV
|FM (BW=15 kHz at 12 dB SINAD)
||28–29.7 MHz: 0.5 μV
50–54 MHz: 0.25 μV
70 MHz: 0.25 μV
144/430/440 MHz: 0.18 μV
|DV (at 1% BER)
||28–29.7 MHz: 1 μV
50 MHz: 0.63 μV
70 MHz: 0.63 μV
144/430 MHz: 0.35 μV
|WFM (at 12 dB SINAD)||76–108 MHz: 10 μV|
|Sensitivity for RED (Less than)
SSB, AM, FM: at 12 dB SINAD
|SSB (2.4 kHz)||1.8–2.999 MHz 10 dBμV emf
3.0–29.995 MHz 0 dBμV emf
50/70 MHz band –6 dBμV emf
144/430 MHz band –6 dBμV emf
|AM (4 kHz, 60% modulation)||1.8–2.999 MHz 16 dBμV emf
3.0–29.995 MHz 6 dBμV emf
50/70 MHz band 0 dBμV emf
144/430 MHz band 0 dBμV emf
|FM (7 kHz, 60% modulation)
||28–29.700 MHz 0 dBμV emf
50/70 MHz band –6 dBμV emf
144/430 MHz band –6 dBμV emf
|Selectivity||SSB (BW=2.4 kHz, sharp)||More than 2.4 kHz / −6 dB
Less than 3.4 kHz / −40 dB
|CW (BW=500 Hz, sharp)||More than 500 Hz / −6 dB
Less than 700 Hz / −40 dB
|RTTY (BW=500 Hz)
||More than 500 Hz / −6 dB
Less than 800 Hz / −40 dB
|AM (BW=6 kHz)||More than 6.0 kHz / −6 dB
Less than 10 kHz / −40 dB
|FM (BW=15 kHz)||More than 12 kHz / −6 dB
Less than 22 kHz / −40 dB
|DV (12.5 kHz spacing)||More than −50 dB|
|Spurious and image rejection ratio||More than 70 dB (HF/50/70 MHz)
More than 65 dB (144/430 MHz)
(except 1/2 IF through on 50/70 MHz,
IF through on 144 MHz)
|Audio output power||More than 2.0 W
(10% distortion, 8 Ω load, 13.8 V DC)
All stated specifications are subject to change without notice or obligation.
- Hand microphone, HM-198
- DC power cable
- CW keyer plug
- Spare fuses
- Separation cable, OPC-2253
- 13-pin plug ACC cable
- USB cable
- Ferrite bead*
* May differ depending on the version.
Catalogs / Brochures
Instruction Manual / Guides
|Update information (Revision 1.10)||CS-7100 Cloning Software|
|DICHIARAZIONE DI CONFORMITA UE (ITALIANO)||IC-7100|
|DOC (DECLARATION OF CONFORMITY)||IC-7100|
|Firmware information: Release E4||IC-7100|
|Firmware update instructions||IC-7100|
|Tips for the USB port settings||IC-7100/IC-7300/IC-7610/IC-7850/IC-7851/IC-9100|
|D-STAR Application Guide||ID-52A/ID-52E/IC-705/IC-9700/IC-7100/ID-4100E/ID-4100A/ID-5100E/ID-5100A/ID-51E/ID-51A/ID-31E/ID-31A/ID-31E PLUS/ID-31A PLUS/RS-MS1A/RS-MS1I/RS-MS3A/ST-4001A/ST-4001I|
|D-STAR Updating the repeater list||ID-52E/ID-52A/IC-705/IC-9700/IC-7100/ID-4100E/ID-4100A/ID-5100E/ID-5100A/ID-51E/ID-51A/ID-31E/ID-31A/ID-31E PLUS/ID-31A PLUS|
|Installation Guide for Windows 11/10/8.1 USB3.0 Supported||USB Driver (Ver.1.30) CS-7100/CS-9100/CS-9700/CS-R8600/IC-7300/RS-BA1/RS-R8600|
Firmware / Software
|Type||Model Name||Version||Last Update|
|Cloning software||CS-7100||Revision 1.11||2022.03.24|
|Setting data file (Original Repeater list)||IC-7100||20130615||2016.01.26|
|USB Driver||IC-7100/IC-7200/IC-7300/IC-7410/IC-7600/IC-7610/IC-7850/IC-7851/IC-9100/IC-9700/IC-R8600||Version 1.30||2018.06.07|
|USB Driver||IC-7100/IC-7200/IC-7300/IC-7410/IC-7600/IC-7610/IC-7850/IC-7851/IC-9100/IC-9700/IC-R8600||Version 1.20||2017.10.05|
|Control software||RS-BA1 Version 2||Version 2.41||2021.12.24|
|Time adjustment software||ST-4003W||Version 1.00||2021.11.30|
Ingress Protection (IP) Code
Ingress Protection (IP) ratings define the level of protection provided by enclosures to prevent the ingress of foreign objects (dust) and liquid into the electrical equipment.
International Standard IEC 60529 outlines an international classification system that describes the sealing characteristics of electrical equipment.
The classification system uses the “IP” code, or “Ingress Protection” code, to define the level of seal.
An IP number contains two numbers (i.e. IP67) in most instances which relate to the level of protection provided by an enclosure or housing.
Either number may be shown as “X” (i.e. IPX6 / IP7X) to indicate the “X” part is not tested.
Degrees of Solid Particle Protection – 1st Digit
|IP6x||No ingress of dust; complete protection against contact. (Dust tight)|
|IP5x||Protected from the amount of dust that would interfere with normal operation. (Dust protected)|
Degrees of Liquid Ingress Protection – 2nd Digit
|IPx8||Protected against continuous immersion in water.
Depth and duration specified by model.
|IPx7||Protected against temporary immersion in water for 1 m (3.3 ft) for 30 minutes|
|IPx6||Protected against water projected by powerful jets from any direction.
100 L per minute by a powerful jets (12.5 mm) for 3 minutes.
|IPx5||Protected against water projected by jets from any direction.
12.5 L per minute by a nozzle (6.3 mm) for 3 minutes.
|IPx4||Protected against water splashed against the equipment from any direction|