Enhanced Audio Output Power
The 1500mW volume audio from Icom custom speaker facilitates loud and clear communication.
Optional 1500 mW Speaker-Microphone, HM-222HLWP*
The combination of the optional HM-222HLWP and the IC-41PRO* also provides 1500 mW (typ.) loud audio from the attached speaker-microphone.
* For the transceiver with a "U" mark on the serial number label.
5W RF Output Power
5 Watts (High) and 1 Watt (Low) Selectable RF Output Power
Waterproof and Dustproof Construction Equivalent to IP67
The IC-41PRO is completely protected against dust ingress and is also waterproof (one meter depth for 30 minutes). All radios are pressure tested to 12 categories of MIL-STD-810-G environmental test.
80 Channel UHF CB plus up to 35 Receive only Channels
Long Battery Life
A Lithium-ion battery pack (BP-280) included provides 18 hours* of operating time
*Typical operation Tx:Rx:Stand-by = 5:5:90. Power save function ON
Easy Channel Rotation
Allows users to easily change channels
Light and slim design makes it easy to carry around
- 18 hr (typical) operating time with BP-280
- Voice announcement of channel number
- VOX capacity with optional headset
- Up to 35 channels of Receive only channel*
- Unique repeater scan plus open, group and priority scan
- In-range Indicator (ATS)
- Built-in CTCSS/DCS for providing silent stand-by
- Selective Calling (SELLCALL) functions
- Duplex operation, providing repeater access
- Commercial base construction, Compact and Rugged
- Private Channels from 450 - 520MHz available for commercial users*
*Ask your dealer for settings
476.4250 MHz to 477.4125 MHz AUS CB
450 MHz to 520 MHz Private/Receive Only
|Number of channels||
|Type of emission||
W: 16K0F3E (25.0 kHz) AUS CB
N: 8K50F3E (12.5 kHz) AUS CB
|Power supply requirement||
7.5 V DC
|Tx High (5W)||
|Rx Max. audio||
500 mA (Internal SP)
|Operating temperature range||
–30°C to +60°C
(W × H × D; Projections not included)
52.2 × 111.8 × 30.3 mm (With BP-280)
270 g (With BP-280)
|Maximum permissible deviation||
± 2.5 kHz (12.5 kHz)
±5.0 kHz (25.0 kHz)
|Frequency error||±2.5 ppm|
|Spurious emissions||70 dB min.|
|Adjacent channel power||
60 dB min.; 69 dB typ. (12.5 kHz)
70 dB min.; 74 dB typ. (25 kHz)
|Audio harmonic distortion||
1.0% typ. (12.5 kHz)
1.5% typ. (25 kHz)
|FM Hum and Noise
(without CCITT filter)
34 dB min.; 40 dB typ. (12.5 kHz)
40 dB min.; 46 dB typ. (25 kHz)
|Sensitivity (at 12dB SINAD)||
0.25 μV typ.
|Adjacent channel selectivity||
40 dB min.; 56 dB typ. (12.5 kHz),
|Spurious response rejection||
70 dB min.
70 dB min.; 73 dB typ.
Hum and noise
(without CCITT filter)
34 dB min.; 43 dB typ. (12.5 kHz)
40 dB min.; 49 dB typ. (25 kHz)
0.25 μV typ.
|AF output power
(at 5% distortion 8Ω load )
1500 mW typical
450 mW typical (single end)
* For the transceiver with "U" mark on the serial number label.
Applicable U.S. Military Specifications and IP rating
Icom makes rugged products that have been tested to and passed the following MIL-STD requirements and strict environmental standards.
|Low Pressure Storage||500.5 I||I|
|Low Pressure Operation||500.5||II|
|High Temperature Storage||501.5||I|
|High Temperature Operation||501.5||II|
|Low Temperature Storage||502.5||I|
|Low Temperature Operation||502.5||II|
|Shock Transit Drop||516.6||IV|
Also meets equivalent MIL-STD-810-C, -D -E and -F.
|Ingress Protection Standard|
|Dust & Water||
IP67 (Dust-tight and waterproof protection)
All stated specifications are subject to change without notice or obligation.
- Battery pack, BP-280
- Desktop charger, BC-213
- AC adapter, BC-123SV
- Belt clip, MB-133
- Antenna, FA-SC72U
*For BP-278/BP-279/BP-280<br/> The AD-130 charger adapters are supplied.
AC adapter supplied depending on versions.
POWER SUPPLY CABLES
Ingress Protection (IP) Code
Ingress Protection (IP) ratings define the level of protection provided by enclosures to prevent the ingress of foreign objects (dust) and liquid into the electrical equipment.
International Standard IEC 60529 outlines an international classification system that describes the sealing characteristics of electrical equipment.
The classification system uses the “IP” code, or “Ingress Protection” code, to define the level of seal.
An IP number contains two numbers (i.e. IP67) in most instances which relate to the level of protection provided by an enclosure or housing.
Either number may be shown as “X” (i.e. IPX6 / IP7X) to indicate the “X” part is not tested.
Degrees of Solid Particle Protection – 1st Digit
|IP6x||No ingress of dust; complete protection against contact. (Dust tight)|
|IP5x||Protected from the amount of dust that would interfere with normal operation. (Dust protected)|
Degrees of Liquid Ingress Protection – 2nd Digit
|IPx8||Protected against continuous immersion in water.
Depth and duration specified by model.
|IPx7||Protected against temporary immersion in water for 1 m (3.3 ft) for 30 minutes|
|IPx6||Protected against water projected by powerful jets from any direction.
100 L per minute by a powerful jets (12.5 mm) for 3 minutes.
|IPx5||Protected against water projected by jets from any direction.
12.5 L per minute by a nozzle (6.3 mm) for 3 minutes.
|IPx4||Protected against water splashed against the equipment from any direction|