Top Performance Mobile Airband Radio with Active Noise Cancelling and Bluetooth® Wireless Connectivity

High Visibility, Simple Operation

The full dot-matrix LCD allows for high visibility and clearly shows alphanumeric characters and icons. Programming memory channels and other radio settings can be simply made from the front panel by radio users. These customizing functions can also be restricted, depending on the radio settings.

Optional Bluetooth® Headset Connectivity

With the optional UT-133A Bluetooth® unit, the IC-A120E can be used with a third-party wireless Bluetooth® headset. Also, using the optional VS-3 Bluetooth® headset, the side tone function is available.

Active Noise Cancelling (ANC)

The newly added built-in ANC reduces background noise in the received and transmitting signals. This function is effective in extremely noisy airport environments full of aircraft noise. The automatic noise limiter (ANL)* reduces pulse-type noise such as engine ignition.

* The ANL and ANC functions cannot be used at the same time.

IP54 Dust-Protection and Water Resistance

The IC-A120E has IP54 dust-protection and water resistance. This construction allows for use in open-air vehicles.

Dualwatch and ON-Hook Scan Functions

The dualwatch function checks the priority and operating channels alternatively. The ON-Hook scan function automatically starts scanning when the hand microphone is hooked on the microphone hanger. When you take the microphone OFF hook, the scanning stops at the priority channel or displayed channel (according to the preprogramming).

Side Tone Function

When using a third-party headset with the optional OPC-871A headset adapter, the side tone function allows you to monitor your own transmitted voice via the connected headset. Even when using a hand microphone, your voice can be monitored from the headset.

Optional Speaker-Microphone, HM-217

Listen to received audio through the HM-217’s built-in speaker. From the speakermicrophone’s front panel, access up/down buttons and two programmable buttons (P1/P2) which can be used as a shortcut to activate frequently used functions.

Other Features

  • A total of 200 memory channels with 12-character channel names
  • Both 12- and 24- volt systems compatible
  • 8.33 kHz* and 25 kHz channel spacing
  • 36 W (P.E.P) RF output power
  • Dualwatch and priority scan functions
  • Power on password protection
  • PC programming capability
  • CI-V Commands for external control
  • VE-PG3 RoIP gateway for interconnect with other radio devices
  • Compliant with European E-marking for installation in vehicles

* For EUR version only

Bluetooth® connection has not been tested for all Bluetooth® compatible devices with this product. This does not guarantee that all devices will work with this product.


Frequency range (TX/RX) 118.000–136.992 MHz (EUR)
118.000–136.975 MHz (AUS)
Channel spacing 25 kHz/8.33 kHz (EUR)
25 kHz (AUS)
Type of emission 6K80A3E, 5K00A3E (EUR)
6K80A3E (AUS)
Operating temperature range –20˚C to +55˚C
Antenna connector SO-239 (50 Ω)
Number of memory channels 200 channels
Power supply requirements 13.75 V/27.5 V DC
Current drain
(at 13.75 V)
TX 5.0 A (maximum)
RX Stand-by 0.5 A
Max. audio 4.0 A
Dimensions (W×H×D)
(Projections are not included)
161×45×175 (mm)
Weight (approximately) 1.5 kg (main unit)


>Output power (at 13.75 V)
(Carrier Power)
9.0 W+1.5 dB/–3 dB (–20°C to +55°C)
9.0 W±1.5 dB (+15°C to +35°C)
Frequency stability ±1 ppm (0˚C to +40˚C)
Spurious emissions* 9 kHz to 30 MHz Less than –46 dBm
30 MHz to 1 GHz Less than –36 dBm (For Harmonics)
Less than –46 dBm (For Non-Harmonics)
1 GHz to 4 GHz Less than –30 dBm (For Harmonics)
Less than –40 dBm (For Non-Harmonics)
Modulation Linear 85%
Max. 95%
Microphone impedance 600Ω

* Except for operating frequency ±1 MHz.


Intermediate frequencies 38.85 MHz/450 kHz (1st/2nd)
Sensitivity (at 12dB SINAD) 1.8 μV (with CCITT filter)
Selectivity 8.33 kHz 2.778/7.37 kHz (6 dB/60 dB)
25 kHz 8/25 kHz (6 dB/60 dB)
Spurious response rejection More than 70 dB
Audio output power
(at 10% distortion,
60% modulation)
Internal SP
(8 Ω load)
1.5 W typical
External SP
(8 Ω load)
More than 10 W
(500 Ω load)
More than 100 mW

Measurements made in accordance with EN 300 676-1. All stated specifications are subject to change without notice or obligation.

Applicable U.S. Military Specifications

Icom makes rugged products that have been tested to and passed the following MIL-STD requirements and strict environmental standards.

MIL-810 G
Method Procedure
Low Pressure 500.5 I, II
High Temperature 501.5 I, II
Low Temperature 502.5 I, II
Temperature Shock 503.5 I-C
Solar Radiation 505.5 I
Humidity 507.5 II
Vibration 514.6 I
Shock 516.6 I, IV

Also meets equivalent MIL-STD-810-C, -D -E and -F.

Applicable IP Rating

Ingress Protection Standard
Dust & Water IP54 (Dust-protection and water resistance)

All stated specifications are subject to change without notice or obligation.

Supplied Accessories

  • Hand microphone, HM-216
  • DC power cable
  • Mounting bracket kit
  • Microphone hanger kit
  • Fuses

Catalogs / Brochures

Brochures Name Size
IC-A120E 365KB

Instruction Manual / Guides

Name Model Name Note
Basic Manual IC-A120/IC-A120E
Full Manual IC-A120/IC-A120E