Slim, Lightweight, High Performance
The IC-M25EURO has the slimmest (depth:30.5 mm) and lightest (220 g) body as a floating marine transceiver*. It also delivers uncompromised performance that will exceed expectations.
*As of July, 2015, researched by Icom.
Large LCD, Simple User Interface
The IC-M25EURO’s LCD is 30% larger than its predecessor, the IC-M23 and shows clearly large channel number and status icons. The buttons on the front panel are well laid out and provide simple and straightforward operation.
USB Charging (Micro-B USB type)
A standard USB connector (Micro-B type) is used for charging the IC-M25EURO. Cigarette lighter cables or mobile batteries for charging smartphones or other devices can be used with the IC-M25EURO*.
* The IC-M25EURO accepts 5 V/1 A (Max.) input. Use of third-party products is not guaranteed.
The IC-M25EURO floats and lets you know where it is with the flashing red LED light and LCD/key backlight.
11 Hours of Battery Life
The built-in 1500 mAh lithium-ion battery allows 11 hours (approx.) of long operation*.
* Typical operation with Tx (Hi): Rx: standby=5:5:90
Optional Speaker-Microphone, HM-213
The optional waterproof speaker-microphone, HM-213, provides commercial grade convenience while mounting the radio around the waist. The radio floats even when the HM-213 is attached.
550 mW Audio Output
The IC-M25EURO provides a powerful 550mW (typical) audio output and received voice can be heard loud and clear.
・ IPX7 waterproof construction
(1 m depth of water for 30 minutes)
・ 4-step battery life indicator
・ Dual/Tri-watch functions*
・ Instant access to Ch 16 or programmable call channel
・ Favorite channel function
・ Monitor function opens noise squelch
・ Auto scan function*
・ LCD auto backlighting
・ AquaQuake™ draining function
・ Supports 4-digit channels
* Not available in the HOL version.
|Frequency range||Tx||156.000–161.450 MHz||156.025–157.425 MHz|
|Rx||156.000–163.425 MHz||156.300–162.000 MHz|
|Usable channel groups||INT, USA*, ATIS* channels
* Depending on version
|INT, USA, WX channels|
|Type of emission||16K0G3E (FM)|
|Power supply voltage||3.7 V DC nominal|
|Current drain||Tx||2.3 A|
|Rx (Internal SP/External SP)||300 mA/200 mA (Max. audio)|
|Operating temperature range||–15°C to +55°C||–10°C to +55°C|
|Antenna impedance||50 Ω|
(Projections not included)
|Weight (approximately)||220 g
(With FA-SC59V and MB-133)
|Output power||5 W (approx.)/1 W/0.5 W*
* For only FRG version
|5 W (approx.)/1 W|
|Max. frequency deviation||±5.0 kHz|
|Frequency stability||±1.5 kHz||±10 ppm|
|Spurious emissions||0.25 μW||0.25 μW typ.|
|Adjacent channel power||70 dB|
|Residual modulation||40 dB|
|Sensitivity||–6 dBμ emf typ. (at 20 dB SINAD)|
|Squelch sensitivity||–6 dBμ emf typ. (at threshold)|
|Adjacent channel selectivity||70 dB||65 dB|
|Spurious response||70 dB||65 dB|
|Intermodulation||68 dB||65 dB|
|Audio output power
(at 10% distortion)
|Internal SP||550 mW typ. (12 Ω load, at 1 kHz)|
|External SP||200 mW (4 Ω load)|
Measurements made in accordance with EN301-178 (IC-M25EURO) and AS/NZS 4415.2-2003 (IC-M25EURO AUS Version).
All stated specifications are subject to change without notice or obligation.
Applicable IP Rating
|Ingress Protection Standard|
|Water||IPX7 (Waterproof protection)|
・ USB charger, BC-217SE/SV*
・ Belt clip, MB-133
・ Antenna, FA-SC59V
・ Hand strap
・ Battery is built-in
* USB charger is not supplied or may differ depending on version.
Ingress Protection (IP) Code
Ingress Protection (IP) ratings define the level of protection provided by enclosures to prevent the ingress of foreign objects (dust) and liquid into the electrical equipment.
International Standard IEC 60529 outlines an international classification system that describes the sealing characteristics of electrical equipment.
The classification system uses the “IP” code, or “Ingress Protection” code, to define the level of seal.
An IP number contains two numbers (i.e. IP67) in most instances which relate to the level of protection provided by an enclosure or housing.
Either number may be shown as “X” (i.e. IPX6 / IP7X) to indicate the “X” part is not tested.
Degrees of Solid Particle Protection – 1st Digit
|IP6x||No ingress of dust; complete protection against contact. (Dust tight)|
|IP5x||Protected from the amount of dust that would interfere with normal operation. (Dust protected)|
Degrees of Liquid Ingress Protection – 2nd Digit
|IPx8||Protected against continuous immersion in water.
Depth and duration specified by model.
|IPx7||Protected against temporary immersion in water for 1 m (3.3 ft) for 30 minutes|
|IPx6||Protected against water projected by powerful jets from any direction.
100 L per minute by a powerful jets (12.5 mm) for 3 minutes.
|IPx5||Protected against water projected by jets from any direction.
12.5 L per minute by a nozzle (6.3 mm) for 3 minutes.
|IPx4||Protected against water splashed against the equipment from any direction|