Meets Strict Environmental Requirements for GMDSS
The IC-GM1600 meets temperature, thermal shock, vibration and drop resistant (from 1 m height) requirements. After passing those environmental tests, the IC-GM1600 retains 1m depth waterproof construction as specified by IMO resolution MSC.149(77) and other related regulations.
Superior Low Temperature Characteristic Lithium Battery Pack
For survival craft use, the optional BP-234 (non-rechargeable) 3300mAh lithium battery pack provides more than 8 hours* of operating time even at –20°C.
Large Keypad with Positive Button Action
Large buttons and knobs provide tactile feedback for positive operation.
Wide Viewing Angle LCD Display
A wide viewing angle, high intensity LCD offers extra clear, easy to read characters. The bright LED indicator on the top of the panel shows the operating condition clearly.
Easy to Operate Even for Unskilled Operators
Operation instructions are printed on the rear panel. All operations can be made with one hand.
- One touch access to Channel 16 and call channel
- Highly visible yellow colored body
- Bright LED indicator on the top of panel
- Supports 4-digit channels
|Frequency range||Tx/Rx||156.300–156.875 MHz|
(Projections not included)
|Weight (approx.)||385 g; 13.6 oz
|Current drain||Transmit (High)||1.0 A (2 W)/0.7 A (1.2 W)|
|Max. audio||400 mA (Internal SP)/200 mA (External SP)|
|Sensitivity (at 12 dB SINAD)||0.20 µV typical (at 12 dB SINAD)|
|Intermodulation rejection||70 dB typical|
|Audio output power (10% dist./ 8 Ω load)||350 mW typical (External SP)
700 mW typical (Internal SP)
|RF output power||2 W/1.2 W|
All stated specifications are subject to change without notice or obligation.
- Battery pack, BP-252
- Battery charger, BC-173
- AC adapter, BC-147SA/SE*
- Belt clip, MB-103Y
- Antenna, FA-S61V
- Neck strap
* Depending on version
Ingress Protection (IP) Code
Ingress Protection (IP) ratings define the level of protection provided by enclosures to prevent the ingress of foreign objects (dust) and liquid into the electrical equipment.
International Standard IEC 60529 outlines an international classification system that describes the sealing characteristics of electrical equipment.
The classification system uses the “IP” code, or “Ingress Protection” code, to define the level of seal.
An IP number contains two numbers (i.e. IP67) in most instances which relate to the level of protection provided by an enclosure or housing.
Either number may be shown as “X” (i.e. IPX6 / IP7X) to indicate the “X” part is not tested.
Degrees of Solid Particle Protection – 1st Digit
|IP6x||No ingress of dust; complete protection against contact. (Dust tight)|
|IP5x||Protected from the amount of dust that would interfere with normal operation. (Dust protected)|
Degrees of Liquid Ingress Protection – 2nd Digit
|IPx8||Protected against continuous immersion in water.
Depth and duration specified by model.
|IPx7||Protected against temporary immersion in water for 1 m (3.3 ft) for 30 minutes|
|IPx6||Protected against water projected by powerful jets from any direction.
100 L per minute by a powerful jets (12.5 mm) for 3 minutes.
|IPx5||Protected against water projected by jets from any direction.
12.5 L per minute by a nozzle (6.3 mm) for 3 minutes.
|IPx4||Protected against water splashed against the equipment from any direction|