Built-in Versatile Tone Signaling
Use the built-in CTCSS, DTCS, 2-Tone 5-Tone or BIIS 1200 capability to set up your own talk groups, and have your radio standby quietly when other groups are talking. Up to 10 2-Tone, 8 5-Tone codes can be decoded on a single memory channel.
Dot-Matrix, Multi-Function LCD
The IC-F5062D series has a large dot-matrix display to show information with high visibility characters. 4 watts (typ.) front mounted speaker delivers clear and loud audio.
IP54 Dust-Protection and Splash Resistance (Controller only)
When used with the optional separation kit, RMK-3, and separation cable, the front panel of the IC-F5062D series can be detached from the main unit. The control head has dust-protection and splash resistance construction equivalent to IP54.
IDAS Digital Mode Ready
IDAS (Icom Digital Advanced System) is Icom’s digital land mobile system using the 6.25kHz narrowband FDMA technology. IDAS has choice of an NXDN™ protocol or an ETSI dPMR™ protocol.
Mode Dependent Scan
In the normal mode scan, you can select a scanning list independent to the channel setting. In the mode dependent setting, the scanning list is automatically selected according to the operating channel. It is convenient when you change operating channels or move to a different operating area, you don't need to change the scanning setting.
Optional Active Noise Canceling Microphone
The optional active noise canceling microphone HM-211 can automatically reduce noise in extremely noisy environments and assist in transmitting clear and accurate audio.
Watch the HM-211 performance video:
- Nuisance delete
- Built-in inversion-type voice scrambler and optional UT-109R/UT-110R available
- Built-in basic LTR™ trunking and MDC 1200 capability* (* Depending on version)
- 8 DTMF autodialing memories and ANI function
- D-Sub accessory connector, ignition sensing line
(Varies according to version)
|Number of channels||
512 ch/128 zones
(Varies according to version)
|Type of emission||
16K0F3E, 14K0F3E, 8K50F3E,
|Current drain||Tx High||
(projections not included; W×H×D)
|RF output power (High)||
|Audio harmonic distortion||
|Sensitivity||at 20dB SINAD||
–4dBμV emf (typ.)
|at 5% BER||
-8dBμV emf (typ.)
|Adjacent channel selectivity (W/M/N)||
|Spurious response rejection||
|AF output power
(at 5% distortion with a 4Ω load)
Function Comparison and Internal Unit Options
|Number of option slots||1||1|
|IDAS dPMR||Tier 2 Mode1/2||Available||-|
|Tier 2 Mode 3||Planned||-|
|Multi-site type D
Applicable U.S. Military Specifications
Icom makes rugged products that have been tested to and passed the following MIL-STD requirements and strict environmental standards.
|High Temperature Storage||
|High Temperature Operation||
|Low Temperature Storage||
|Low Temperature Operation||
|Shock Transit Drop||
* Rain blowing and drip tests were performed on the controller and RMK-3 only.
Also meets equivalent MIL STD 810 -C, -D and -E.
All stated specifications are subject to change without notice or obligation.
- Microphone, HM-152
- Microphone hanger and its cable
- Mounting bracket kit
- DC power cable
- Function name sticker
POWER SUPPLY CABLES
Catalogs / Brochures
|IC-F5062D/IC-F6062D Digital Series||700KB|
|Business Radio Solutions(European Edition)||61.95MB|
Instruction Manual / Guides
|DOC (DECLARATION OF CONFORMITY)||IC-F5062/IC-F5062D|
|DICHIARAZIONE DI CONFORMITA UE (ITALIANO)||IC-F5062/IC-F5062D|
|Instructions for dPMR versions||IC-F5062D/IC-F6062D|
|Precautions for dPMR versions||IC-F5062D/IC-F6062D|
|DOC (DECLARATION OF CONFORMITY)||IC-F6062/IC-F6062D|
|DICHIARAZIONE DI CONFORMITA UE(ITALIANO)||IC-F6062/IC-F6062D|
Ingress Protection (IP) Code
Ingress Protection (IP) ratings define the level of protection provided by enclosures to prevent the ingress of foreign objects (dust) and liquid into the electrical equipment.
International Standard IEC 60529 outlines an international classification system that describes the sealing characteristics of electrical equipment.
The classification system uses the “IP” code, or “Ingress Protection” code, to define the level of seal.
An IP number contains two numbers (i.e. IP67) in most instances which relate to the level of protection provided by an enclosure or housing.
Either number may be shown as “X” (i.e. IPX6 / IP7X) to indicate the “X” part is not tested.
Degrees of Solid Particle Protection – 1st Digit
|IP6x||No ingress of dust; complete protection against contact. (Dust tight)|
|IP5x||Protected from the amount of dust that would interfere with normal operation. (Dust protected)|
Degrees of Liquid Ingress Protection – 2nd Digit
|IPx8||Protected against continuous immersion in water.
Depth and duration specified by model.
|IPx7||Protected against temporary immersion in water for 1 m (3.3 ft) for 30 minutes|
|IPx6||Protected against water projected by powerful jets from any direction.
100 L per minute by a powerful jets (12.5 mm) for 3 minutes.
|IPx5||Protected against water projected by jets from any direction.
12.5 L per minute by a nozzle (6.3 mm) for 3 minutes.
|IPx4||Protected against water splashed against the equipment from any direction|