Professional Analog Communication
The IC-F1000/F2000 series VHF/UHF transceivers combine a compact, easy-to-carry design with rugged durability to ensure reliable analog communication in demanding environments. Standard features include multiple signaling options (CTCSS/DTCS, 2-Tone, 5-Tone, MDC, DTMF) and essential safety functions such as Man Down, Lone Worker, and Emergency. The channel announcement feature provides voice guidance for easy, intuitive operation. A BTL amplifier paired with a large-diameter internal speaker delivers loud, clear audio—even in noisy environments.
Icom Custom High Power Capacity Speaker for 1500 mW Powerful Audio
Optional 1500 mW Speaker-Microphone, HM-222HLWP*
* For the transceiver with a “N” or “U” mark on the serial number label. Not available for USA version.
Compact, Waterproof Durable Design (IP67 and MIL-STD-810-G)
Enhanced Emergency Safety with Built-in Motion/Stationary Detection Sensor
128 Channel Capacity with Eight Zones (Simple Type and Ten-Key Type)
Built-in 2-Tone, 5-Tone, CTCSS and DTCS
MDC Compatible
Man Down and Lone Worker Functions
Channel Announcement
Up to 20/18 Hours (VHF/UHF, 5 W output) of Operating Time with BP-280 Battery*
* UHF output power varies (4 W or 5 W) depending on the version.
General Features
- 136–174, 400–470, 450–520 MHz versions
- 5 W RF output power both VHF & UHF (depending on version)
- 1500 mW large volume audio from Icom custom speaker
- Improved sound clarity
- Compact (52.2 × 111.8 × 24.5 mm; 2.1 × 4.4 × 1.0 in) and lightweight (240 g; 8.5 oz with BP-279)
- IP67 waterproof and dust-tight protection
- Tested to 12 categories of MIL-STD-810-G environmental tests
- DTMF autodial memories
- 16-position rotary selector and ON/OFF volume knob
- “Shift key” function increases number of programmable key assignments
- Up to 20/18 hours (VHF/UHF, 5 W output) of operating time with BP-280 battery pack (depending on version)
- Eight character alphanumeric display (Ten-keypad/simplekeypad versions)
- Three color LED
Safety and Security
- 16 code inversion voice scrambler* (depending on version)
- Radio Stun/Revive/Kill commands (2-Tone and 5-Tone, RX only)
- Radio Stun/Revive commands (MDC, RX only)
- Auto TX function (2-Tone and 5-Tone)
- MDC emergency call with open microphone function (MDC, RX only)
- Man down function
- Lone worker function
- Motion and stationary detection function
- Surveillance function temporarily turns OFF the beep and LED indicator
- Power ON password (for the simple type and 10-key type)
- Emergency key for emergency call
Signaling Functions
- CTCSS and DTCS tone
- 2-Tone and 5-Tone
- MDC PTT ID, Emergency (TX/RX), Radio Check (RX), Stun (RX), Revive (RX)
- Up to 100 ID numbers and names can be saved to show the alias name, instead of the ID number
- BIIS PTT ID transmission* (depending on version)
Scan Functions
- Priority scan monitors one or two priority channels while scanning non-priority channels
- Mode dependent scan automatically changes the scan list according to the operating channel
- Power ON scan function
- Talk back timer
Voice/Audio Functions
- Channel announcement function
- VOX function for hands-free operation
- Audio compander* (depending on version)
- Siren sound for security alarm
* Inversion voice scrambler, BIIS and audio compander functions are not available, depending on version.
Genuine Product Authentication
Are you using a genuine Icom product?
Scan the QR code on the rear chassis under the battery to verify it is a genuine Icom product.
For more details: www.icomjapan.com/explore/genuine_info/
Partner Product
IJKP is a brand of Icom Information Equipment Corporation, a member of the Icom Group.
IJKP offers affordable accessory options for Icom products, providing cost-effective solutions without compromising quality and reliability.
IJKP-HM-2PL-OW
Acoustic Type Earphone Microphone
General
| IC-F1000/T/S (136 – 174 MHz) |
IC-F2000/T/S (400 – 470 MHz) |
IC-F2000/T/S (450 – 520 MHz) |
|||
|---|---|---|---|---|---|
| Frequency coverage* (*Varies according to version) |
136 ~ 174 MHz | 400 ~ 470 MHz | 450 ~ 520 MHz (EXP/AUS) | ||
| Number of channels | (with LCD) |
128 channels/ 8 zones |
128 channels/ 8 zones |
||
| (without LCD) |
16 channels |
16 channels |
|||
| Type of emission |
(EUR) |
16K0F3E/14K0F3E/8K50F3E |
|||
| (EXP/AUS) |
16K0F3E/8K50F3E |
||||
| (EXP/CAN) |
16K0F3E/11K0F3E |
||||
| Power supply requirement |
7.5 V DC nominal |
||||
| Current drain (approx.) |
Tx |
1.3 A |
1.6 A (5 W) |
||
| Rx |
500 mA (Max. audio (internal SP) |
||||
| Antenna impedance |
50Ω |
||||
| Operating temperature range (Radio specification) |
–30°C to +60°C; –22°F to +140°F |
–10°C to +60°C |
|||
| Dimensions (W × H × D; Projections not included) |
52.2 × 111.8 × 24.5 mm; 2.1 × 4.4 × 1.0 in (With BP-279) |
||||
| Weight (approx.) |
240 g; 8.5 oz (With BP-279) |
||||
Transmitter
| IC-F1000/T/S (136 – 174 MHz) |
IC-F2000/T/S (400 – 470 MHz) |
IC-F2000/T/S (450 – 520 MHz) |
|||
|---|---|---|---|---|---|
| Output power (Hi, L2, L1) |
5 W, 2 W, 1 W |
5 W, 2 W, 1 W or |
|||
| Maximum frequency deviation |
± 5.0 kHz (W), ±4.0 kHz (M), ±2.5 kHz (N) |
||||
| Spurious emissions | (EUR) |
0.25 μW (≤ 1 GHz), 1.0 μW (> 1 GHz) |
– |
||
| (EXP/AUS) |
0.25 μW (≤ 1 GHz), 1.0 μW (> 1 GHz) |
1.0 μW |
|||
| (EXP/CAN) |
70 dB min. |
– |
|||
| Frequency stability |
±2.5 ppm |
||||
| Adjacent channel power | (EUR) |
82 dB typ. (W), |
77 dB typ. (W), |
– |
|
| (EXP/AUS) |
–44 dBm typ. (W), |
–36 dBm typ. (W), |
–35 dBm typ. (W), |
||
| (EXP/CAN) |
81 dB typ. (W), |
77 dB typ. (W), |
– |
||
| Audio harmonic distortion (at AF 1 kHz 40% deviation) |
1.0% typ. (W/M/N) |
||||
| FM Hum and Noise | (with CCITT filter, EUR) |
70 dB typ. (W), |
69 dB typ. (W), |
– |
|
| (with CCITT filter, EXP/AUS) |
– |
54 dB typ. (W), |
|||
| (without CCITT filter, EXP/CAN) |
68 dB typ. (W), |
66 dB typ. (W), |
– |
||
| External microphone connector |
3-conductor 2.5 (d) mm (1/10)/2.2 kΩ |
||||
Receiver
| IC-F1000/T/S (136 – 174 MHz) |
IC-F2000/T/S (400 – 470 MHz) |
IC-F2000/T/S (450 – 520 MHz) |
|||
|---|---|---|---|---|---|
| Sensitivity | (at 12 dB SINAD) |
0.20 μV typ. |
0.21 μV typ. |
||
| (at 20 dB SINAD) |
–4 dBμV typ. emf |
–2.5 dBμV typ. emf |
– |
||
| Adjacent channel selectivity | (EUR) |
76 dB typ. (W), |
73 dB typ. (W), |
– |
|
| (EXP/AUS) |
76 dB typ. (W), |
74 dB typ. (W), |
72 dB typ. (W), |
||
| (EXP/CAN) |
75 dB typ. (W), |
73 dB typ. (W), |
– |
||
| Spurious response rejection |
70 dB min. |
60 dB min. |
|||
| Intermodulation rejection | (EUR) |
65 dB min. |
– |
||
| (EXP/AUS) |
72 dB typ. |
65 dB min. |
|||
| (EXP/CAN) |
75 dB typ. |
72 dB typ. |
– |
||
| Hum and noise | (With CCITT filter, EUR) |
58 dB typ. (W), |
58 dB typ. (W), |
– |
|
| (With CCITT filter, EXP/AUS) |
– |
66 dB typ. (W), |
|||
| (Without CCITT filter, EXP/CAN) |
66 dB typ. (W), |
65 dB typ. (W), |
– |
||
| AF output power (at 5% distortion 8Ω load ) |
Internal SP |
1500 mW typ. |
|||
| External SP |
400 mW typ. (Single end) |
||||
| External speaker connector |
2-conductor 3.5 (d) mm (1⁄8)/8 Ω |
||||
All stated specifications are subject to change without notice or obligation. Specifications may vary depending on the version.
Measurements made in accordance with EN 300-086 (EUR), TIA-603 (EXP/CAN) or AS/NSZ 4295 (EXP/AUS).
Function Comparison and Internal Unit Options
| IC-F1000/S/T IC-F2000/S/T | ||
|---|---|---|
| Number of option slots |
- |
|
| CTCSS/ DTCS | encoder |
Available |
| decoder |
Available |
|
| 2-Tone | encoder |
Available |
| decoder |
Available |
|
| 5-Tone | encoder |
Available |
| decoder |
Available |
|
| DTMF autodial |
Available |
|
| DTMF decoder |
- |
|
| Voice Scrambler | Inversion |
Available (Depending on version) |
| Non-rolling |
- |
|
| Rolling |
- |
|
| APCO P25 digital |
- |
|
| 6.25kHz digital |
- |
|
| MDC 1200 |
Available (Limited functions) |
|
| Motion function |
Available |
|
| Lone worker function |
Available |
|
| Man down function |
Available |
|
| Intrinsically safe |
- |
|
| Voice announcement |
Available |
|
| Audio compander |
Available (Depending on version) |
|
| GPS receiver |
- |
|
Applicable U.S. Military Specifications
Icom makes rugged products that have been tested to and passed the following MIL-STD requirements and strict environmental standards.
| Standard |
MIL-810 G | |
|---|---|---|
| Method | Procedure | |
| Low Pressure Storage | 500.5 I | I |
| Low Pressure Operation | 500.5 | II |
| High Temperature Storage | 501.5 | I |
| High Temperature Operation | 501.5 | II |
| Low Temperature Storage | 502.5 | I |
| Low Temperature Operation | 502.5 | II |
| Temperature Shock | 503.5 | I-C |
| Solar Radiation | 505.5 | I |
| Rain Blowing | 506.5 | I |
| Rain Drip | 506.5 | III |
| Humidity Induced | 507.5 | II |
| Salt Fog | 509.5 | - |
| Dust Blowing | 510.5 | I |
| Immersion | 512.5 | I |
| Vibration | 514.6 | I |
| Shock Functional | 516.6 | I |
| Shock Transit Drop | 516.6 | IV |
Also meets equivalent MIL-STD-810-C, -D -E and -F.
| Ingress Protection Standard (IC-F1000/T/S, IC-F2000/T/S & HM-168LWP) | |
|---|---|
| Dust & Water |
IP67 (Dust-tight and waterproof protection) |
All stated specifications are subject to change without notice or obligation.
Supplied accessories
- Battery pack, BP-279 or BP-280*
- Desktop charger, BC-213
- AC adapter, BC-242
- Belt clip, MB-133
- Antenna
*May differ depending on version.
MICROPHONES
HEADSETS
CHARGERS
AC ADAPTERS
POWER SUPPLY CABLES
MOUNTING BRACKETS
BELT CLIPS
ANTENNAS
PLUG ADAPTER CABLES
PTT SWITCH CABLES
Catalogs / Brochures
| Brochures Name | Size |
|---|---|
| IC-F1000/IC-F2000 Series(A4) | 3.82MB |
| Business Radio Solutions (USA Edition) | 7.52MB |
| IC-F1000/IC-F2000 Series(LT) | 3.53MB |
| Business Radio Solutions (European Edition) | 7.89MB |
Instruction Manual / Guides
| Name | Model Name | Note |
|---|---|---|
| Operating Guide | IC-F1000 series, IC-F2000 series | |
| Instructions | IC-F1000 series, IC-F2000 series | |
| INSTRUCTIONS | IC-F1000 series, IC-F2000 series | |
| PRÉCAUTIONS | IC-F1000 series, IC-F2000 series | |
| Precautions(French) | IC-F1000 seris, IC-F1100D series, IC-F2000 series, IC-F2100D series | |
| DOC (DECLARATION OF CONFORMITY) | IC-F1000/IC-F1000S/IC-F1000T | |
| DICHIARAZIONE DI CONFORMITA UE (ITALIANO) | IC-F1000/IC-F1000S/IC-F1000T | |
| DOC (DECLARATION OF CONFORMITY) | IC-F1000/IC-F1000S/IC-F1000T | |
| DICHIARAZIONE DI CONFORMITA UE (ITALIANO) | IC-F1000/IC-F1000S/IC-F1000T | |
| DOC (DECLARATION OF CONFORMITY) | IC-F2000/IC-F2000S/IC-F2000T | |
| DICHIARAZIONE DI CONFORMITA UE(ITALIANO) | IC-F2000/IC-F2000S/IC-F2000T |
CloseCloseIngress Protection (IP) Code
Ingress Protection (IP) ratings define the level of protection provided by enclosures to prevent the ingress of foreign objects (dust) and liquid into the electrical equipment.
International Standard IEC 60529 outlines an international classification system that describes the sealing characteristics of electrical equipment.
The classification system uses the “IP” code, or “Ingress Protection” code, to define the level of seal.
An IP number contains two numbers (i.e. IP67) in most instances which relate to the level of protection provided by an enclosure or housing.
Either number may be shown as “X” (i.e. IPX6 / IP7X) to indicate the “X” part is not tested.
Degrees of Solid Particle Protection – 1st Digit
| IP6x | No ingress of dust; complete protection against contact. (Dust tight) |
|---|---|
| IP5x | Protected from the amount of dust that would interfere with normal operation. (Dust protected) |
Degrees of Liquid Ingress Protection – 2nd Digit
| IPx8 | Protected against continuous immersion in water. Depth and duration specified by model. |
|---|---|
| IPx7 | Protected against temporary immersion in water for 1 m (3.3 ft) for 30 minutes |
| IPx6 | Protected against water projected by powerful jets from any direction. 100 L per minute by a powerful jets (12.5 mm) for 3 minutes. |
| IPx5 | Protected against water projected by jets from any direction. 12.5 L per minute by a nozzle (6.3 mm) for 3 minutes. |
| IPx4 | Protected against water splashed against the equipment from any direction |
