Icom Custom High Power Handling Capacity Speaker for 1500 mW Powerful Audio
Optional 1500 mW Speaker-Microphone, HM-222HLWP*
* For the transceiver with a "U" mark on the serial number label. Not available for USA version.
Compact, Waterproof Durable Design (IP67 and MIL-STD-810-G)
Enhanced Emergency Safety with Built-in Motion/Stationary Detection Sensor
128 Channel Capacity with Eight Zones (Simple Type and Ten-Key Type)
Built-in 2-Tone, 5-Tone, CTCSS and DTCS
MDC and BIIS Compatible
16-Code Inversion Voice Scrambler
Man Down and Lone Worker Functions
Channel Announcement
Up to 14 Hours of Operating Time with Supplied BP-279 Battery
General Features
- 136–174, 335–380, 400–470, 450–512, 450–520 MHz versions
- 1500 mW large volume audio from Icom custom speaker
- Improved sound clarity
- Compact (52.2 × 111.8 × 24.5 mm; 2.1 × 4.4 × 1.0 in) and lightweight (240 g; 8.5 oz with BP-279)
- IP67 waterproof and dust-tight protection
- Tested to 12 categories of MIL-STD-810-G environmental tests
- DTMF autodial memories
- 16-position rotary selector and ON/OFF volume knob
- “Shift key” function increases number of programmable key assignments
- Up to 14 hours of operating time with supplied BP-279 battery pack
- Eight character alphanumeric display (Ten-keypad/simplekeypad versions)
- Three color LED
Safety and Security
- 16-code inversion voice scrambler
- Radio Stun/Revive/Kill commands (2-Tone and 5-Tone, RX only)
- Radio Stun/Revive commands (MDC, RX only)
- Auto TX function (2-Tone and 5-Tone)
- MDC emergency call with open microphone function (MDC, RX only)
- Man down function
- Lone worker function
- Motion and stationary detection function
- Surveillance function temporarily turns OFF the beep and LED indicator
- Power ON password (for the simple type and 10-key type)
- Emergency key for emergency call
Signaling Functions
- CTCSS and DTCS tone
- 2-Tone and 5-Tone
- MDC PTT ID, Emergency (TX/RX), Radio Check (RX), Stun (RX), Revive (RX)
- Up to 100 ID numbers and names can be saved to show the alias name, instead of the ID number
- BIIS PTT ID transmission
Scan Functions
- Priority scan monitors one or two priority channels while scanning non-priority channels
- Mode dependent scan automatically changes the scan list according to the operating channel
- Power ON scan function
- Talk back timer
Voice/Audio Functions
- Channel announcement function
- VOX function for hands-free operation
- Audio compander
- Siren sound for security alarm
General
| IC-F1000T/S | IC-F1000 | IC-F2000T/S | IC-F2000 | ||
|---|---|---|---|---|---|
| Frequency coverage* (*Varies according to version) |
136–174 MHz |
400–470 MHz (USA/EUR/EXP) |
335–380 MHz (EXP) |
||
| Number of channels |
128 channels/ 8 zones |
16 channels | 128 channels/ 8 zones | 16 channels | |
| Type of emission |
16K0F3E*/11K0F3E (USA/EXP) |
||||
|
16K0F3E/14K0F3E/8K50F3E (EUR) |
|||||
| Power supply requirement |
7.5V DC nominal |
||||
| Current drain (approx.) |
Tx |
1.3A |
|||
| Rx |
500 mA /77 mA |
500 mA /80 mA |
|||
| Antenna impedance |
50Ω |
||||
| Operating temperature range (Radio specification) |
–30°C to +60°C; –22°F to +140°F (Radio specification) |
||||
|
–25°C to +55°C (Radio specifi cation) |
|||||
| Dimensions (W × H × D; Projections not included) |
52.2 × 111.8 × 24.5 mm; 2.1 × 4.4 × 1.0 in (With BP-279) |
||||
| Weight (approx.) |
240 g; 8.5 oz (With BP-279) |
||||
*16k0F3E (30 kHz bandwidth) is no longer available for FCC Part 90 licensees for USA versions.
Transmitter
| IC-F1000T/S | IC-F1000 | IC-F2000T/S | IC-F2000 | ||
|---|---|---|---|---|---|
| Output power (Hi, L2, L1) |
5 W, 2 W, 1 W |
4 W, 2 W, 1 W |
|||
| Maximum frequency deviation |
± 5.0 kHz (25 kHz)*, ±4.0 kHz (20 kHz), ±2.5 kHz (12.5 kHz) |
||||
| Spurious emissions |
70 dB minimum (USA/EXP) |
||||
|
0.25 μW (≤ 1 GHz), 1.0 μW (> 1 GHz) (EUR) |
|||||
| Frequency stability |
±2.5ppm |
||||
| Audio harmonic distortion |
1.0% typical (25/20 kHz), 1.5% typical (12.5 kHz) |
||||
| FM Hum and Noise (without CCITT filter) |
46 dB typical (25 kHz), 40 dB typical (12.5 kHz) |
||||
| Residual modulations (with CCITT filter) |
50 dB typical (25 kHz), |
53 dB typical (25 kHz), |
|||
| External microphone connector |
3-conductor 2.5 (d) mm (1/10)/2.2 kΩ |
||||
* 25 kHz bandwidth is no longer available for FCC Part 90 licensees for USA versions.
Receiver
| IC-F1000T/S | IC-F1000 | IC-F2000T/S | IC-F2000 | ||
|---|---|---|---|---|---|
| Sensitivity | (at 12dB SINAD) |
0.25μV typical |
|||
| (at 20dB SINAD) |
–4 dBμV typical emf |
||||
| Adjacent channel selectivity |
76 dB typical (25 kHz), 78 dB typical (25 kHz), |
73 dB typical (25 kHz), 74 dB typical (25 kHz), |
|||
|
76 dB typ. (25 kHz), |
73 dB typ. (25 kHz), |
||||
| Spurious response rejection |
70dB minimum |
||||
| Intermodulation rejection |
74 dB typical (USA/EXP) |
73 dB typical (USA/EXP) |
|||
|
68 dB typical (EUR) |
67 dB typical (EUR) |
||||
| Hum and noise | (With CCITT filter) |
51 dB typical (25 kHz), |
49 dB typical (25 kHz), |
||
| (Without CCITT filter) |
52 dB typical (25 kHz), |
52 dB typical (25 kHz), |
|||
| AF output power (at 5% distortion 8Ω load ) |
Internal SP |
1500 mW typical |
|||
| External SP |
400 mW typical (Single end) |
||||
| External speaker connector |
2-conductor 3.5 (d) mm (1⁄8)/8 Ω |
||||
All stated specifications are subject to change without notice or obligation.
Measurements made in accordance with TIA-603 (USA/EXP) or EN 300-086 (EUR).
* For the transceiver with "U" make on the serial number label.
Function Comparison and Internal Unit Options
| IC-F1000/S/T IC-F2000/S/T | ||
|---|---|---|
| Number of option slots |
- |
|
| CTCSS/ DTCS | encoder |
Available |
| decoder |
Available |
|
| 2-Tone | encoder |
Available |
| decoder |
Available |
|
| 5-Tone | encoder |
Available |
| decoder |
Available |
|
| DTMF autodial |
Available |
|
| DTMF decoder |
- |
|
| Voice Scrambler | Inversion |
Available |
| Non-rolling |
- |
|
| Rolling |
- |
|
| APCO P25 digital |
- |
|
| 6.25kHz digital |
- |
|
| MDC 1200 |
Available (Limited functions) |
|
| Motion function |
Available |
|
| Lone worker function |
Available |
|
| Man down function |
Available |
|
| Intrinsically safe |
- |
|
| Voice announcement |
Available |
|
| Audio compander |
Available |
|
| GPS receiver |
- |
|
Applicable U.S. Military Specifications
Icom makes rugged products that have been tested to and passed the following MIL-STD requirements and strict environmental standards.
| Standard |
MIL-810 G | |
|---|---|---|
| Method | Procedure | |
| Low Pressure Storage | 500.5 I | I |
| Low Pressure Operation | 500.5 | II |
| High Temperature Storage | 501.5 | I |
| High Temperature Operation | 501.5 | II |
| Low Temperature Storage | 502.5 | I |
| Low Temperature Operation | 502.5 | II |
| Temperature Shock | 503.5 | I-C |
| Solar Radiation | 505.5 | I |
| Rain Blowing | 506.5 | I |
| Rain Drip | 506.5 | III |
| Humidity Induced | 507.5 | II |
| Salt Fog | 509.5 | - |
| Dust Blowing | 510.5 | I |
| Immersion | 512.5 | I |
| Vibration | 514.6 | I |
| Shock Functional | 516.6 | I |
| Shock Transit Drop | 516.6 | IV |
Also meets equivalent MIL-STD-810-C, -D -E and -F.
| Ingress Protection Standard (IC-F1000/T/S, IC-F2000/T/S & HM-168LWP) | |
|---|---|
| Dust & Water |
IP67 (Dust-tight and waterproof protection) |
All stated specifications are subject to change without notice or obligation.
Supplied accessories
- Battery pack, BP-279
- Desktop charger, BC-213*
- AC adapter, BC-123SA/SE/SUK/SV or BC-242*
- Belt clip, MB-133
- Antenna
*May differ depending on version
MICROPHONES
HEADSETS
PTT/VOX CABLES
CHARGERS
AC ADAPTERS
POWER SUPPLY CABLES
MOUNTING BRACKETS
BELT CLIPS
ANTENNAS
Catalogs / Brochures
| Brochures Name | Size |
|---|---|
| IC-F1000/IC-F2000 Series | 1.52MB |
| Professional Radios | 12.11MB |
| Business Radio Solutions (European Edition) | 9.96MB |
Instruction Manual / Guides
| Name | Model Name | Note |
|---|---|---|
| Operating Guide | IC-F1000 series, IC-F2000 series | |
| Instructions | IC-F1000 series, IC-F2000 series | |
| Precautions(French) | IC-F1000 seris, IC-F1100D series, IC-F2000 series, IC-F2100D series | |
| DOC (DECLARATION OF CONFORMITY) | IC-F1000/IC-F1000S/IC-F1000T | |
| DICHIARAZIONE DI CONFORMITA UE (ITALIANO) | IC-F1000/IC-F1000S/IC-F1000T | |
| DOC (DECLARATION OF CONFORMITY) | IC-F2000/IC-F2000S/IC-F2000T | |
| DICHIARAZIONE DI CONFORMITA UE(ITALIANO) | IC-F2000/IC-F2000S/IC-F2000T |
CloseCloseIngress Protection (IP) Code
Ingress Protection (IP) ratings define the level of protection provided by enclosures to prevent the ingress of foreign objects (dust) and liquid into the electrical equipment.
International Standard IEC 60529 outlines an international classification system that describes the sealing characteristics of electrical equipment.
The classification system uses the “IP” code, or “Ingress Protection” code, to define the level of seal.
An IP number contains two numbers (i.e. IP67) in most instances which relate to the level of protection provided by an enclosure or housing.
Either number may be shown as “X” (i.e. IPX6 / IP7X) to indicate the “X” part is not tested.
Degrees of Solid Particle Protection – 1st Digit
| IP6x | No ingress of dust; complete protection against contact. (Dust tight) |
|---|---|
| IP5x | Protected from the amount of dust that would interfere with normal operation. (Dust protected) |
Degrees of Liquid Ingress Protection – 2nd Digit
| IPx8 | Protected against continuous immersion in water. Depth and duration specified by model. |
|---|---|
| IPx7 | Protected against temporary immersion in water for 1 m (3.3 ft) for 30 minutes |
| IPx6 | Protected against water projected by powerful jets from any direction. 100 L per minute by a powerful jets (12.5 mm) for 3 minutes. |
| IPx5 | Protected against water projected by jets from any direction. 12.5 L per minute by a nozzle (6.3 mm) for 3 minutes. |
| IPx4 | Protected against water splashed against the equipment from any direction |
