Space-Saving, Two-Piece Configuration
The IC-M400BBE consists of a two-piece, black box configuration. All function control including DSC operation, can be made from the COMMANDMIC™, HM-195B/SW, and the RF unit, IC-M400BBE, can be installed in an out-of-sight place.
New Intuitive User Interface
The new menu system is shared with Icom's latest models. The bottom line of the dot-matrix display shows the software key functions which can be toggled with the left and right buttons.
Active Noise Cancelling
The built-in bidirectional active noise cancelling reduces background noise to up to 90% and improves both your transmitted voice and incoming call. Hear and be heard more clearly.
10 W Loud Audio, Public Address and Foghorn
The IC-M400BBE has a built-in 10 W amplifier that increases the audio output from an additional external speaker. The public address function allows you to make an announcement from the microphone like a loud speaker, and the foghorn can also be emitted from the external speaker.
Built-in Class D DSC
The built-in DSC watch function monitors Ch. 70 (DSC channel) activity, even while you are receiving another channel. DSC functions include: distress, individual, group, all ships, urgency, safety, position request/report, polling request and DSC test calls.
Built-in GNSS Receiver
Common NMEA Interface
When connected to an external GPS receiver, current position and time are shown on the Commandmic display. When receiving DSC information from another vessel, the radio can transfer it to a navigational device via NMEA 0183 connectivity.
AIS Target Call with MA-510TR/MA-500TR
When connected to the optional MA-510TR/MA-500TR Class B AIS transponder, the AIS target call function allows you to set up an individual DSC call from the MA-510TR/MA-500TR.
- MarineCommander™ compatible
- AquaQuake™ water draining function (HM-195B/SW)
- IPX7 waterproof protection both for IC-M400BBE and HM-195B/SW (1 m depth for 30 minutes)
- Dual/tri-watch function for monitoring Ch.16 and/or call channel
- Priority and normal scan
|Frequency range||TX||156.000–161.450 MHz|
|Power supply requirement||13.8 V DC nominal
(10.8–15.6 V DC)
(Projections not included)
|Current drain||TX 25 W output||5.5 A|
|RX Max. audio||3.5 A|
|Sensitivity||Main||−5 dBμ emf typ. (20 dB SINAD)|
|DSC||−4 dBμ emf typ. (1% BER)|
|Intermodulation||Main||More than 68 dB|
|DSC||More than 68 dBμ emf (1% BER)|
|Audio output power
(at 10% distortion, 4 Ω load)
|More than 2 W (HM-195B/SW)
More than 10 W (RX speaker)
|RF output power||25 W, 1 W|
Applicable IP Rating
|Ingress Protection Standards|
IPX7 (Waterproof protection)
All stated specifications are subject to change without notice or obligation.
- COMMANDMIC, HM-195B/SW*
- DC power cable
- GNSS antenna
- 6.1 m (20 ft) of cable*, OPC-1540 between HM-195B/SW and IC-M400BBE
- Mounting base for cable connector*
- Microphone hanger*
* COMMANDMIC, HM-195B (black color) or HM-195SW (white color) is supplied depending on version.
Catalogs / Brochures
Instruction Manual / Guides
|DICHIARAZIONE DI CONFORMITA UE (ITALIANO)||IC-M400BB|
|DOC (DECLARATION OF CONFORMITY)||IC-M400BB|
|DOC (DECLARATION OF CONFORMITY)||IC-M400BBE|
|DICHIARAZIONE DI CONFORMITA UE (ITALIANO)||IC-M400BBE|
|BASIC MANUAL (German/Spanish/French/Italian)||IC-M423GE/IC-M400BBE|
Ingress Protection (IP) Code
Ingress Protection (IP) ratings define the level of protection provided by enclosures to prevent the ingress of foreign objects (dust) and liquid into the electrical equipment.
International Standard IEC 60529 outlines an international classification system that describes the sealing characteristics of electrical equipment.
The classification system uses the “IP” code, or “Ingress Protection” code, to define the level of seal.
An IP number contains two numbers (i.e. IP67) in most instances which relate to the level of protection provided by an enclosure or housing.
Either number may be shown as “X” (i.e. IPX6 / IP7X) to indicate the “X” part is not tested.
Degrees of Solid Particle Protection – 1st Digit
|IP6x||No ingress of dust; complete protection against contact. (Dust tight)|
|IP5x||Protected from the amount of dust that would interfere with normal operation. (Dust protected)|
Degrees of Liquid Ingress Protection – 2nd Digit
|IPx8||Protected against continuous immersion in water.
Depth and duration specified by model.
|IPx7||Protected against temporary immersion in water for 1 m (3.3 ft) for 30 minutes|
|IPx6||Protected against water projected by powerful jets from any direction.
100 L per minute by a powerful jets (12.5 mm) for 3 minutes.
|IPx5||Protected against water projected by jets from any direction.
12.5 L per minute by a nozzle (6.3 mm) for 3 minutes.
|IPx4||Protected against water splashed against the equipment from any direction|