Benefits of AIS (Automatic Identification System)
An AIS transponder on your boat automatically receives information broadcast by other AIS-equipped vessel’s and base stations, all while your own vessel’s static and dynamic information is being transmitted. Using with an AIS transponder, you can find AIS mounted small boats and buoys that are difficult to be detected with a marine radar. The MA-510TR can receive both Class A and B AIS signals and increases your safety at sea.
4.3-inch Color TFT LCD
The wide viewing, high resolution 4.3-inch color TFT display clearly shows your and other vessels’ positions. Potentially dangerous vessels are shown in red and ships registered as your friends are shown in yellow. The day-mode display is readable in direct sunlight, and the night-mode display ensures good readability in the dark for further convenience.
AIS Target List and Details
The ‘Target’ list screen shows all detected AIS equipped vessels and targets. The ‘Danger’ list screen shows a list of vessels that are within six nautical miles of Closest Point of Approach (CPA) and sixty minutes of Time to Closest Point of Approach (TCPA) from your vessel. The ‘Friend’ list screen displays the detected AIS targets that you set as friends. When you want to see target details, select the target by the cursor keys and push [ENT] key.
Simplified Navigation Function
The Navigation function guides you to a specified waypoint or AIS target. You can assign a maximum of 100 favorite fishing spots or destinations as waypoints. The Navigation function is simply started by just selecting a waypoint or an AIS target on the display.
Navigation to MOB Waypoint
When the [WPT/MOB] button is held down, the MA-510TR automatically marks a waypoint of the vessel’s current position and activates the MOB (Man Overboard) navigation function to the location the MOB event occurred.
Individual DSC Call
You can transmit an individual DSC Call by simply selecting an AIS target and the voice channel on the MA-510TR*.
* A compatible Icom VHF radio is required. The MA-510TR and a radio can be connected with the accessory cable. See the instruction manual of each for radio’s connecting instructions.
AIS data can be output from an USB cable connector on the rear panel*.
* A third party application and a connection cable are required.
Supplied GPS Antenna
NMEA 2000™, NMEA 0183/-HS Connectivity
With the plug-and-play functionality of NMEA 2000™, the MA-510TR can connect to a NMEA 2000™ network (an external plotter, marine radar and VHF radio). Using NMEA 0183/-HS connectivity, the transponder can connect to a transceiver, plotter device, marine radar, external GPS receiver, or switch button.
Collision Alarm Function
When a vessel comes into the CPA or TCPA range, the vessel’s icon blinks on the plotter display and a beep sound is heard. When connected to external audio equipment installed on the chart table or fly bridge, the collision alarm function will alert you, even when you are away from the AIS transponder.
Silent Mode for Security and Privacy
Silent mode switches off the AIS transmitter and allows you to temporarily stop transmitting your vessel’s position information. This function is useful when you do not want to reveal your fishing spots to other vessels. You can receive other vessel’s AIS reports also while the silent mode is ON.
- Compatible with both 12 V and 24 V power sources
- Multi-lingual user interface (English, French, Indonesian, Spanish and Vietnamese)
- Anchor watch function sounds an alarm when your vessel is at anchor but has drifted
- IPX7 waterproof protection (up to 1 m depth of water for 30 minutes; except connectors)
REAR PANEL VIEW
161.500 MHz to 162.025 MHz
|Type of emission||
|Antenna impedance||50 Ω nominal|
|Intermediate frequency||CH-A||1st: 21.700 MHz, 2nd: 450 kHz|
|CH-B||1st: 30.150 MHz, 2nd: 450 kHz|
|Operating temperature range||–20°C to +60°C;
–4°F to +140°F
|Power supply requirement||Negative ground: 12 V or 24 V DC nominal (9.6 to 31.2 V)|
|Current drain (at 12 V DC)||TX: 1.5 A, RX: 0.7 A|
(Projections not included)
|166.2 (W) × 110.2 (H) × 92.5 (D) mm,
6.5 (W) × 4.3 (H) × 3.6 (D) inch
|Weight (approximate))||700 g, 1.5 lb|
|Output power||2 W|
|Conducted spurious emission||Less than –36 dBm (9 kHz–1 GHz)
Less than –30 dBm (1 GHz–4 GHz)
|Sensitivity||Less than –110 dBm|
|Adjacent channel selectivity||More than –31 dBm|
|Spurious response||More than –31 dBm|
|Intermodulation||More than –36 dBm|
|Conducted spurious emission||Less than –57 dBm (9 kHz–1 GHz)
Less than –47 dBm (1 GHz–4 GHz)
|Blocking||More than –15 dBm (±0.5 MHz–±5 MHz)
More than –23 dBm (±5 MHz–±10 MHz)
|Co-channel||More than –111 dBm|
|Frequency coverage||156.525 MHz|
|Type of emission||16K0G2B|
|Sensitivity||Less than –110 dBm|
|Adjacent channel selectivity||More than 70 dB|
|Spurious response||More than –34 dBm|
|Intermodulation||More than –39 dBm|
|Blocking||More than –20 dBm|
|Received frequency||1575.42 MHz|
|Acquisition||72 ch (maximum)|
|Differential satellites||WAAS, EGNOS, MSAS, GAGAN|
|Dimensions (approximate)||96.2 × 225 (H) mm, 3.8 × 8.9 (H) inch|
|Weight (approximate)||700 g, 1.5 lb (including cable and mounting bracket)|
|Cable length (approximate)||10 m, 32.8 ft|
|USB (Type-B Mini)||GGA, GNS, GLL, GSA, GSV, RMC, VTG, VDM, VDO, ACA, ACS, ALR, TXT|
|NMEA 2000TM||Input||059392/904, 060160/416/928, 065240, 126208/996, 129026/029/545|
|Output||059392/904, 060416/928, 126208/464/993/996/998, 129026/029/038/039/040/041/539/540/545/792/793/794/797/798/801/802/803/805/806/807/809/810/811|
|NMEA 0183||NMEA Input/Output||4800–38400 bps Input/Output,
sentence format: Output, GGA, GNS, GLL, GSA*1, GSV*1, RMC, VTG, GBS, DTM, DSC
|External GPS Input||4800–38400 bps Input,
sentence format: GGA, GNS, GLL, RMC, VTG, GBS*2, DTM
|AIS Output||38400 bps Output,
sentence format: VDM, VDO, ACA, ACS, ALR, TXT
*1 Only 38400 bps. *2 When a received GPS signal does not include a GBS sentence, the transponder will not receive the signal from the external GPS receiver.
All stated specifications are subject to change without notice or obligation.
Compatible Icom VHF Radios* with the MA-510TR
IC-M605, IC-M605EURO, IC-M506, IC-M506EURO, IC-M506GE, IC-M424, IC-M424G, IC-M423, IC-M423G, IC-M423GE, IC-M400BB, IC-M400BBE, IC-M330, IC-M330G, IC-M330GE, IC-M324, IC-M324G, IC-M323, IC-M323G
* As of May 2020
- GPS antenna
- DC power cable
- Mounting bracket kit
- Accessory connector
Catalogs / Brochures
Ingress Protection (IP) Code
Ingress Protection (IP) ratings define the level of protection provided by enclosures to prevent the ingress of foreign objects (dust) and liquid into the electrical equipment.
International Standard IEC 60529 outlines an international classification system that describes the sealing characteristics of electrical equipment.
The classification system uses the “IP” code, or “Ingress Protection” code, to define the level of seal.
An IP number contains two numbers (i.e. IP67) in most instances which relate to the level of protection provided by an enclosure or housing.
Either number may be shown as “X” (i.e. IPX6 / IP7X) to indicate the “X” part is not tested.
Degrees of Solid Particle Protection – 1st Digit
|IP6x||No ingress of dust; complete protection against contact. (Dust tight)|
|IP5x||Protected from the amount of dust that would interfere with normal operation. (Dust protected)|
Degrees of Liquid Ingress Protection – 2nd Digit
|IPx8||Protected against continuous immersion in water.
Depth and duration specified by model.
|IPx7||Protected against temporary immersion in water for 1 m (3.3 ft) for 30 minutes|
|IPx6||Protected against water projected by powerful jets from any direction.
100 L per minute by a powerful jets (12.5 mm) for 3 minutes.
|IPx5||Protected against water projected by jets from any direction.
12.5 L per minute by a nozzle (6.3 mm) for 3 minutes.
|IPx4||Protected against water splashed against the equipment from any direction|