Easy operation with easy-to-grip body and large buttons
The IC-M37E has a slim-designed body and big buttons, allowing for easy operation even while wearing gloves during fishing or sailing. This enables quick replies to calls. Additionally, the IC-M37E provides instant access to channel 16, as well as the Call channel.
Loud Audio Output
The IC-M37E provides a powerful 700 mW (typical) audio output. Received voice can be heard loud and clear. It helps you to hear calls even in noisy onboard environments.
12 Hours Long Time Operation
The BP-296 Li-ion battery pack, providing an operating time of approximately 12 hours for a full day of cruising or fishing experience. For added peace of mind during emergencies, the optional BP-297 battery case is also available.
*Approximate. Tx: Rx: Standby = 5 : 5 : 90.
IP57 Dust-tight and Waterproof Protection
The IC-M37E boasts exceptional IP57 waterproof protection, ensuring its safety even when submerged in water up to a depth of 1 meter for 30 minutes. Feel confident using it on deck or in dusty environments without any concerns.
Float'n Flash™ Function
If you accidentally drop the IC-M37E into the water, it will float, flash and sound an alarm. The buoyancy, the flashing light, and the sound reduce the risk of loss at sea even at night.
Float'n Flash Function Movie
AquaQuake™ Water Draining Function
The AquaQuake™ prevents audio degradation from a water-logged speaker. This function removes water from the speaker grill by vibrating the speaker cone. You can hear clear audio with this function.
6 W* RF Output Power
The IC-M37E's 6 Watts of transmit power will provides extended communication range for the user.
*AUS Version: 5 W
Dualwatch and Tri-watch Functions
The Dualwatch and Tri-watch functions allow for periodic checking of Channel 16 while operating on another channel. This feature proves convenient when communicating with your friends' vessels or during sailing regattas, enabling you to make important announcements about the race.
* Not available in the HOL version.
Monitor Function
When receiving signal is weak and difficult to hear, you can use the Monitor function to open the squelch and help you hear the signal.
Additional features
- Low Battery Alert function notifies you of low battery level
- Voice Loud and Mute function enables to temporary maximize/mute the volume
- Channel history function stores the last five channels used for easy recall
- Various Scan functions (normal/priority)
- Favorite Channel function
- BP-296 user replaceable Li-ion battery pack supplied
- Weather channels with Weather Alert function (AUS Version)
- Lock function
- Power Save function
- Backlight function for night time opeartion
- LCD contrast selection
General
IC-M37E | IC-M37E AUS Version |
||
---|---|---|---|
Frequency range | TX | 156.000–161.450 MHz | 156.025–157.425 MHz |
RX | 156.000–163.425 MHz | 156.300–162.000 MHz | |
Usable channel groups | INT, ATIS*, USA* * Available depending on version |
INT, USA, WX | |
Type of emission | 16K0G3E | 16K0G3E | |
Current drain (at 3.7 V DC) |
TX | 2.75 A/1.0 A (6.0 W/1.0 W output) |
2.6 A/1.0 A (5.0 W/1.0 W output) |
RX | 0.4 A/0.2 A (Max. audio. Int. SP/Ext. SP) |
0.4 A/0.2 A (Max. audio. Int. SP/Ext. SP) |
|
Operating temperature range |
–15°C to +55°C | –10°C to +55°C | |
Antenna impedance | 50 Ω | 50 Ω | |
Dimensions (W×H×D) (Projections not included) |
59.7 × 140.5 × 38.7 mm | 59.7 × 140.5 × 38.7 mm | |
Weight (approximate) | 293 g (with BP-296, antenna and belt clip) |
293 g (with BP-296, antenna and belt clip) |
Transmitter
IC-M37E | IC-M37E AUS Version |
|
---|---|---|
Output power (High/Low) |
6 W/1 W | 5 W/1 W |
Max. frequency deviation | ±5.0 kHz | ±5.0 kHz |
Frequency stability | ±1.5 kHz | ±10 ppm |
Spurious emissions | 0.25 μW | 0.25 μW typical |
Receiver
IC-M37E | IC-M37E AUS Version |
||
---|---|---|---|
Sensitivity (at 20 dB SINAD) |
–4 dBμ emf typical | –4 dBμ emf typical | |
Squelch sensitivity (Threshold) | –5 dBμ emf typical | –5 dBμ emf typical | |
Adjacent channel selectivity | 70 dB typical | 65 dB | |
Spurious response | 70 dB typical | 65 dB | |
Intermodulation | 68 dB typical | 65 dB | |
Hum and noise | 40 dB | 40 dB | |
Audio output power (at 10% distortion) |
Internal SP | 700 mW typical ( 8 Ω load) |
700 mW typical ( 8 Ω load) |
External SP | 200 mW typical ( 4 Ω load) |
200 mW typical ( 4 Ω load) |
Measurements made in accordance with EN301 178(IC-M37E) and AS/NZS 4415.2-2003.(IC-M37E AUS Version)
All stated specifications are subject to change without not ice or obligation.
Applicable U.S. Military Specifications
Standard |
MIL-810 G | |
---|---|---|
Method | Procedure | |
Low Pressure | 500.5 | I, II |
High Temperature | 501.5 | I, II |
Low Temperature | 502.5 | I, II |
Temperature Shock | 503.5 | I-C |
Solar Radiation | 505.5 | I |
Rain Blowing/Drip | 506.5 | I, III |
Humidity | 507.5 | II |
Salt Fog | 509.5 | – |
Dust Blowing | 510.5 | I |
Immersion | 512.5 | I |
Vibration | 514.6 | I |
Shock | 516.6 | I, IV |
Also meets equivalent MIL-STD-810-C, -D, -E and -F.
Applicable IP Rating
Ingress Protection Standard | |
---|---|
Water | IPX57 dust protection and waterproof protection |
Supplied accessories
・ BP-296 battery pack
・ BC-235 desktop charger
・ BC-217SE/SV AC adapter*
・ FA-SC59V antenna
・ MB-133 belt clip
・ Hand strap
* May differ or not supplied, depending on the transceiver version.
MICROPHONES
CHARGERS
AC ADAPTERS
BELT CLIPS
ANTENNAS
Catalogs / Brochures
Brochures Name | Size |
---|---|
IC-M37E Europe Edition | 2.14MB |
IC-M37E Australia Edition | 2.13MB |
Maine Radios (European Edition) | 5.16MB |
Instruction Manual / Guides
Name | Model Name | Note |
---|---|---|
INSTRUCTION MANUAL | IC-M37/IC-M37E | |
BASIC MANUAL (German/Italian) | IC-M37E | |
DOC (DECLARATION OF CONFORMITY) | IC-M37E | |
BASIC MANUAL (Spanish/French) | IC-M37E | |
DICHIARAZIONE DI CONFORMITA UE(ITALIANO) | IC-M37E |
Ingress Protection (IP) Code
Ingress Protection (IP) ratings define the level of protection provided by enclosures to prevent the ingress of foreign objects (dust) and liquid into the electrical equipment.
International Standard IEC 60529 outlines an international classification system that describes the sealing characteristics of electrical equipment.
The classification system uses the “IP” code, or “Ingress Protection” code, to define the level of seal.
An IP number contains two numbers (i.e. IP67) in most instances which relate to the level of protection provided by an enclosure or housing.
Either number may be shown as “X” (i.e. IPX6 / IP7X) to indicate the “X” part is not tested.
Degrees of Solid Particle Protection – 1st Digit
IP6x | No ingress of dust; complete protection against contact. (Dust tight) |
---|---|
IP5x | Protected from the amount of dust that would interfere with normal operation. (Dust protected) |
Degrees of Liquid Ingress Protection – 2nd Digit
IPx8 | Protected against continuous immersion in water. Depth and duration specified by model. |
---|---|
IPx7 | Protected against temporary immersion in water for 1 m (3.3 ft) for 30 minutes |
IPx6 | Protected against water projected by powerful jets from any direction. 100 L per minute by a powerful jets (12.5 mm) for 3 minutes. |
IPx5 | Protected against water projected by jets from any direction. 12.5 L per minute by a nozzle (6.3 mm) for 3 minutes. |
IPx4 | Protected against water splashed against the equipment from any direction |