Radio Control & Intercom via Your Smart Device
Integrated AIS Receiver*
With its integrated AIS receiver* or external NMEA sentence (third party AIS receiver, transponder), the IC-M510 can show real-time AIS vessel traffic information on the display. You can directly make an individual DSC call to selected AIS targets from the AIS screen.
* AIS receiver is not included depending on the transceiver version.
Wide Viewing Angle Color TFT LCD
New Sleek Design
Simplified Navigation Function
Provides Clear, Loud Audio
The IC-M510’s internal speaker enhances the received audio. The waterproof speaker provides superior sound quality with a wide frequency range for powerful, clear audio.
Interface BOX for NMEA 2000™ and Hailer
The optional CT-M500 wireless interface box provides NMEA 2000™ connectivity and Two-way Hailer/PA function. The CT-M500 and the radio can be connected through WLAN. This separate interface box option allows for flexibility in positioning the unit closer to the NMEA network connection point.
Prestigious iF Design Award 2022 Recipient
The IC-M510 is a winning product of the iF DESIGN AWARD 2022, the world-renowned design prize. The IC-M510 VHF marine radio provides essential maritime communication and supports safety on the water. Integration with the newly developed RS-M500 smart-device app also enables an unprecedented onboard communication experience.
AIS Target Call with MA-510TR
When connected to the optional MA-510TR Class B AIS transponder, the AIS target call function allows you to make an individual DSC call without having to manually input an MMSI number.
Other Features
- Effortlessly switch Day and Night display modes with a one-touch button
- Active Noise Canceling
- NMEA 0183/HS connectivity
- Integrated GNSS receiver (Selectable from either internal receiver or use optional UX-241 GNSS antenna)
- IP68 advanced waterproofing (1 m depth of water for 60 minutes)
- Automatic Foghorn function (CT-M500 required)
- Voice Scrambler with optional UT-112A
- AquaQuake™ prevents audio degradation from a water-logged speaker
- Supplied speaker-microphone, HM-205RB can be connected to either front or rear panel to meet to user's requirement.
- External speaker connection
- Controlled with COMMANDMIC™ HM-195GB/GW
- Supports 4-digit channels
Rear Panel View
IC-M510 Configuration Variations
AIS Receiver | |
---|---|
IC-M510 AIS | Integrated |
IC-M510 | Not included |
General
Frequency range | TX | 156.025–157.425 MHz | |
---|---|---|---|
RX | 156.050–163.275 MHz | ||
DSC | 156.525 MHz | ||
AIS1, 2*1 | 161.975, 162.025 MHz | ||
Usable channels | USA, CAN, INT, WX channels | ||
Type of emission | 16K0G3E (FM), 16K0G2B (DSC), 16K0GXW (AIS)*1 | ||
Power supply requirement | 13.8 V DC (11.7–15.9 V DC) | ||
Current drain (at 13.8 V DC) |
TX 25 W output | 5.5 A | |
RX Max. audio | 3.3 A | ||
Operating temperature range | –20°C to +60°C; –4°F to +140°F | ||
Antenna impedance | 50 Ω | ||
Weight (approx.) | 730 g; 1.6 lb (Not including microphone) |
Transmitter
Output power (at 13.8 V DC) | 25 W, 1W | |
---|---|---|
Max. frequency deviation | ±5 kHz | |
Frequency tolerance | ±0.5 kHz | |
Spurious emissions | Less than −70 dBc (at 25 W) | |
Residual modulation | More than 40 dB | |
Adjacent channel power | More than 70 dB |
Receiver
Sensitivity (at 12 dB SINAD) DSC (1% BER) |
0.32 μV typical 0.89 μV emf typical |
|
---|---|---|
Adjacent channel selectivity DSC (1% BER) |
More than 75 dB More than 73 dBμ emf |
|
Spurious response DSC (1% BER) |
More than 75 dB More than 73 dBμ emf |
|
Intermodulation DSC (1% BER) |
More than 75 dB More than 68 dBμ emf |
|
Hum and noise | More than 40 dB | |
Audio output power (at 10% distortion) |
More than 15 W with a 4 Ω external speake |
Wireless LAN
Wireless LAN standard | IEEE802.11 b/g/n |
---|---|
Authentication and Encryption | WEP (64/128 bit), WPA-PSK (TKIP), WPA2-PSK (AES) |
Channels | 1 to 13 (2.4 GHz band)*2 |
Output power | Less than 10 mW/MHz |
*1 Only for the Integrated AIS version. *2 May differ depending on the country of use.
Measurements made in accordance with TIA/EIA 603.
All stated specifications are subject to change without notice or obligation.
Applicable U.S. Military Specifications
Icom makes rugged products that have been tested to and passed the following MIL-STD requirements and strict environmental standards.
Standard |
MIL-810 G | |
---|---|---|
Method | Procedure | |
Low Pressure |
500.5 |
I, II |
High Temperature |
501.5 |
I, II |
Low Temperature |
502.5 |
I, II |
Temperature Shock |
503.5 |
I-C |
Solar Radiation |
505.5 |
I |
Rain |
506.5 |
I |
Humidity |
507.5 |
II |
Salt Fog |
509.5 |
- |
Dust Blowing |
510.5 |
I |
Immersion |
512.5 |
I |
Vibration |
514.6 |
I |
Shock |
516.6 |
I, IV |
Also meets equivalent MIL-STD-810-C, -D, -E and -F.
Applicable IP Rating
Ingress Protection Standard | |
---|---|
Dust & Water | IP68 Dust-tight and waterproof protection |
Supplied Accessories
- Speaker microphone, HM-205RB
- Microphone hanger
- DC power cable
- Mounting bracket kit
Dimensions
EXTERNAL SPEAKERS
FLUSH MOUNT KITS
COVER
SOFTWARE
GPS ANTENNAS
INTERNAL UNITS
EXTENSION CABLES
ADAPTER CABLES
INTERFACE BOX
Catalogs / Brochures
Brochures Name | Size |
---|---|
Marine Products | 6.48MB |
IC-M510 | 3.79MB |
Instruction Manual / Guides
Name | Model Name | Note |
---|---|---|
Instruction Manual | IC-M510/IC-M510E |
IC-M510/E Icom Class-D DSC Fixed Mount VHF Marine Transceiver Promotion Video
Ingress Protection (IP) Code
Ingress Protection (IP) ratings define the level of protection provided by enclosures to prevent the ingress of foreign objects (dust) and liquid into the electrical equipment.
International Standard IEC 60529 outlines an international classification system that describes the sealing characteristics of electrical equipment.
The classification system uses the “IP” code, or “Ingress Protection” code, to define the level of seal.
An IP number contains two numbers (i.e. IP67) in most instances which relate to the level of protection provided by an enclosure or housing.
Either number may be shown as “X” (i.e. IPX6 / IP7X) to indicate the “X” part is not tested.
Degrees of Solid Particle Protection – 1st Digit
IP6x | No ingress of dust; complete protection against contact. (Dust tight) |
---|---|
IP5x | Protected from the amount of dust that would interfere with normal operation. (Dust protected) |
Degrees of Liquid Ingress Protection – 2nd Digit
IPx8 | Protected against continuous immersion in water. Depth and duration specified by model. |
---|---|
IPx7 | Protected against temporary immersion in water for 1 m (3.3 ft) for 30 minutes |
IPx6 | Protected against water projected by powerful jets from any direction. 100 L per minute by a powerful jets (12.5 mm) for 3 minutes. |
IPx5 | Protected against water projected by jets from any direction. 12.5 L per minute by a nozzle (6.3 mm) for 3 minutes. |
IPx4 | Protected against water splashed against the equipment from any direction |