AIS Receiver and DSC in One Marine Handheld
AIS receiver and DSC function add further assurance to your safety at sea. The integrated AIS receiver displays vessel traffic information on the screen. The AIS target call function allows you to easily set up a DSC individual call. Distress calls can be made with the rear panel Distress button.
6 W RF Output Power and 10 Hours of Operating Time
The IC-M94DE’s 6 watts*1 of transmit power provides extended communication range for the user. The supplied BP-306 high capacity 2400 mAh (typical) Li-ion battery, provides 10 hours of operating time, under normal conditions*2.
*1 5 W for AUS version
*2 Approximate, typical operation with TX: RX: Standby= 5: 5: 90 duty ratio when the Power save function is ON.
Class-Leading 1500 mW Audio Output
Icom’s custom high-power capacity speaker delivers a loud 1500 mW (typical) audio output with improved acoustic sound clarity for noisy maritime environments.
Simplified Navigation Function
Navigation screen
The Navigation function guides you to a specified waypoint. You can assign up to 50 favourite fishing spots or destinations as waypoints.
Float’n Flash and MOB Auto Set Functions
If the IC-M94DE falls into the water, it will float and the LCD screen, keys and rear panel Distress button will flash helping you to retrieve it. Pressing the distress button while the Float’n Flash is working will transmit the MOB distress signal.
Other Features
- Integrated GPS receiver
- Active noise cancelling technology
- IPX7 waterproof (1 m depth of water for 30 minutes)
- Dualwatch and Tri-watch functions
- Favourite channel function
- Supports 4-digit channels
- AquaQuake™ prevents audio degradation from a water-logged speaker
General
| IC-M94DE | IC-M94DE AUS Version |
||
|---|---|---|---|
| Frequency range | Tx | 156.000–161.450 MHz | 156.025–157.425 MHz |
| Rx | 156.000–163.425 MHz | 156.300–162.000 MHz | |
| DSC | 156.525 MHz | 156.525 MHz | |
| AIS (RX) | 162.025 MHz | 162.025 MHz | |
| Usable channel groups | INT, USA* and ATIS* channels * Available depending on version |
INT, USA and WX channels | |
| Type of emission | 16K0G3E (FM), 16K0G2B (DSC) 16K0GXW (AIS) |
16K0G3E (FM), 16K0G2B (DSC) 16K0GXW (AIS) |
|
| Current drain (at 7.2 V DC) |
TX (6 W/1 W output) | 1500 mA/700 mA (approx.) | 1400 mA/700 mA (approx.) |
| RX (Inter SP/Exter SP Max. audio) | 700 mA/350 mA (approx.) | 700 mA/350 mA (approx.) | |
| Operating temperature range | –15°C to +55°C | –15°C to +55°C | |
| Antenna impedance | 50 Ω | 50 Ω | |
| Dimensions (W×H×D) (Projections not included) |
60.9 × 145.8 × 43.8 mm | 60.9 × 145.8 × 43.8 mm | |
| Weight (approximately) | 357 g (With BP-306, antenna, MB-133) |
357 g (With BP-306, antenna, MB-133) |
|
Transmitter
| IC-M94DE | IC-M94DE AUS Version |
||
|---|---|---|---|
| Output power (Hi/Low) | 6 W/1 W | 5 W/1 W | |
| Max. frequency deviation | ±5 kHz | ±5 kHz | |
| Frequency stability | ±1.5 kHz | ±10 ppm | |
| Spurious emissions | 0.25 μW | 0.25 μW typical | |
Receiver
| IC-M94DE | IC-M94DE AUS Version |
||
|---|---|---|---|
| Sensitivity (at 20 dB SINAD) DSC receiver (at 1% BER) AIS receiver (at 20% PER) |
–6 dBμ emf typical –3 dBμ emf typical –107 dBm |
–6 dBμ emf typical –3 dBμ emf typical –107 dBm |
|
| Squelch sensitivity (Threshold) | –6 dBμ emf typical | –6 dBμ emf typical | |
| Adjacent channel selectivity DSC receiver (at 1% BER) |
70 dB 73 dBμ emf |
65 dB 73 dBμ emf |
|
| Spurious response DSC receiver (at 1% BER) |
70 dB 73 dBμ emf |
65 dB 73 dBμ emf |
|
| Intermodulation DSC receiver (at 1% BER) |
68 dB 68 dBμ emf |
65 dB 68 dBμ emf |
|
| Hum and noise | 40 dB | 40 dB | |
| Audio output power (at 10% distortion) |
Internal SP | 1500 mW typical (8 Ω load) | 1500 mW typical (8 Ω load) |
| External SP | 350 mW typical (8 Ω load) | 350 mW typical (8 Ω load) | |
Measurements made in accordance with EN302 885 and IEC62238 (for EUR versions). AS/NZS 4415.2-2003 (for AUS version).
Applicable U.S. Military Specifications & IP Rating
| Standard |
MIL-810 G | |
|---|---|---|
| Method | Procedure | |
| Low Pressure |
500.5 |
I, II |
| High Temperature |
501.5 |
I, II |
| Low Temperature |
502.5 |
I, II |
| Temperature Shock |
503.5 |
I-C |
| Solar Radiation |
505.5 |
I |
| Rain Blowing/Drip |
506.5 |
I, III |
| Humidity |
507.5 |
II |
| Salt Fog |
509.5 |
- |
| Dust Blowing |
510.5 |
I |
| Immersion |
512.5 |
I |
| Vibration |
514.6 |
I |
| Shock |
516.6 |
I, IV |
Also meets equivalent MIL-STD-810-C, -D, -E and -F.
| Ingress Protection Standards | |
|---|---|
| Water |
IPX7 (Waterproof protection) |
All stated specifications are subject to change without notice or obligation.
Supplied Accessories
- BP-306 battery pack
- BC-251 battery charger
- AC adapter*
- MB-133 belt clip
- Antenna
- Hand strap
* May differ depending on version
AC ADAPTERS
POWER SUPPLY CABLES
BELT CLIPS
BELT HANGERS
Catalogs / Brochures
| Brochures Name | Size |
|---|---|
| Marine Products (European Edition) | 12.28MB |
| IC-M94DE | 1.04MB |
| IC-M94DE Australia Edition | 985KB |
Instruction Manual / Guides
| Name | Model Name | Note |
|---|---|---|
| INSTRUCTION MANUAL | IC-M94D/IC-M94DE | |
| DOC (DECLARATION OF CONFORMITY) | IC-M94DE | |
| BASIC MANUAL (German/Spanish/French/Italian) | IC-M94DE | |
| DICHIARAZIONE DI CONFORMITA UE(ITALIANO) | IC-M94DE |
IC-M94D Promotion Video
CloseCloseIngress Protection (IP) Code
Ingress Protection (IP) ratings define the level of protection provided by enclosures to prevent the ingress of foreign objects (dust) and liquid into the electrical equipment.
International Standard IEC 60529 outlines an international classification system that describes the sealing characteristics of electrical equipment.
The classification system uses the “IP” code, or “Ingress Protection” code, to define the level of seal.
An IP number contains two numbers (i.e. IP67) in most instances which relate to the level of protection provided by an enclosure or housing.
Either number may be shown as “X” (i.e. IPX6 / IP7X) to indicate the “X” part is not tested.
Degrees of Solid Particle Protection – 1st Digit
| IP6x | No ingress of dust; complete protection against contact. (Dust tight) |
|---|---|
| IP5x | Protected from the amount of dust that would interfere with normal operation. (Dust protected) |
Degrees of Liquid Ingress Protection – 2nd Digit
| IPx8 | Protected against continuous immersion in water. Depth and duration specified by model. |
|---|---|
| IPx7 | Protected against temporary immersion in water for 1 m (3.3 ft) for 30 minutes |
| IPx6 | Protected against water projected by powerful jets from any direction. 100 L per minute by a powerful jets (12.5 mm) for 3 minutes. |
| IPx5 | Protected against water projected by jets from any direction. 12.5 L per minute by a nozzle (6.3 mm) for 3 minutes. |
| IPx4 | Protected against water splashed against the equipment from any direction |
