Innovative LTE Radios with Licensed Professional Radio Mode for Increased Capacity and Coverage
The IP730D and IP740D are dual mode “hybrid” radios that provide nationwide coverage over LTE networks and conventional VHF/UHF professional radio mode (IDAS™ digital/analog mode).
The IP730D series can receive both communications from an LTE radio group and IDAS™ (or analog) group at a time (audio mixed). You can press either the main PTT for LTE or the sub PTT button for IDAS™ or analog channel to answer in accordance with pre-programming. If necessary, you can press the main and sub PTT buttons to address two groups at the same time.
The Bridge function* relays received IDAS™ digital audio to the LTE radio group, while transferring the LTE radio conversations to the IDAS™ group. This function is useful when communicating outside of the LTE service coverage area with an IDAS™ radio, or temporary cross band connection between two IDAS™ radio groups using different frequencies or channels.
(Not available in Analog mode).
* When using the Bridge function, operating time will be shorter and output power of the IP730D/IP740D is reduced to 1 W.
The Bridge function may be prohibited in some countries. Please check the legal requirements in your country before using this function.
LTE mode provides secure private push-to-talk communication over an LTE (4G) and 3G network*. The cellular network provides coverage into building basements or high-rise floors where conventional radio systems may not reach.
* Network coverage provided by a custom SIM card. Service availability depends on the country.
IDAS™ digital mode is a conventional VHF/UHF radio mode using licensed professional radio channels. It also provides Individual, Group and All calls with PTT operation. When operating in remote, mountainous areas, 4G/3G networks may not be available. Conventional VHF/UHF communications provide a stable, local alternative.
Sub PTT Button for Dual Mode Operation
Full-Duplex Communication in LTE Mode
The IP730D series provides full-duplex operation in LTE mode. This allows you to talk and receive at the same time, much like a telephone conversation.
1500 mW Powerful Audio
Built-in Bluetooth® Technology
GPS Data Transmission Capability
The IP730D series has a built-in GPS receiver that can automatically transmit position data at programmed intervals*. (LTE mode only)
* GPS mapping software is required separately.
(Not supplied from Icom Inc.)
IP67 Waterproof and Dust-Tight Specification
Emergency Call Features Specification
By holding down the orange emergency button, you can transmit an emergency call. In addition, the radio has three emergency related functions: Man Down, Lone Worker and Motion/Stationary Detection functions. If one of these functions is activated, the radio automatically transmits emergency signals to alert your controller or dispatcher of any potential trouble.
(Common to LTE and IDAS™ mode)
Digital Voice Recording/Playback
The IP730D series can record incoming calls of up to 4 minutes, or a maximum of 10 messages, and the user can check recorded communications.
RoIP Gateway to Link to Other Systems
• 136 – 174, 350 – 470, 400 – 520 MHz versions
• 128 Channels/8 Zones
• Rotary encoder with channel announcement function*1
• DTMF code transmission with optional DTMF microphone, HM-245T*2
• Vibration alert function
• Surveillance function
• AquaQuake™ function prevents audio degradation from a water-logged speaker
IDAS™ Operating Mode
• NXDN™ conventional
• NXDN™ multi-site conventional over IP network
• IDAS™ digital simulcast
IDAS™ Digital Functions
• Over-the-Air Programming (OTAP) function updates the radio configuration over the LTE
• Over-the-Air Alias (OAA)*1 displays the caller’s name without programming
• Up to 500 ID numbers for IDAS™ mode can be saved in the Call List to show the alias name
• Individual, Group and All calls
• Digital voice scrambler (15-bit encryption)
• Talk back
• CTCSS and DTCS
• 12.5 kHz channel spacing
*1 These functions will be available with future firmware upgrades.
*2 DTMF microphone, HM-245T will be available later.
|Audio output power||Internal SP (8 Ω load)||1500 mW typical (10% distortion), 1300 mW typical (5% distortion)|
|External SP (8 Ω load)||1000 mW typical (10% distortion), 650 mW typical (5% distortion)|
|HM-222H (8 Ω load)||1500 mW typical (10% distortion), 1300 mW typical (5% distortion)|
|Operating temperature range||–30 °C to +60 °C, –22 °F to +140 °F|
|Power supply voltage||7.5 V DC nominal|
|Receive||Max. audio (INT SP) 520 mA,
Stand-by 300 mA
|Transmit||Hi (5 W) 1.8 A|
(H × W × D; Projections not included)
|140.5 × 61.7 × 42.8 mm, 5.5 × 2.4 × 1.7 in (with BP-303)|
|Weight (approximate)||320 g, 11.3 oz (with BP-303)|
|Bluetooth® technology||Version: 4.2, Output: Class 2, Protocol: HFP, HSP|
LTE (4G)/W-CDMA (3G)LTE (4G)/W-CDMA (3G)
LTE (4G): B1, B3, B7, B8, B20
|USA||LTE (4G): B2, B4, B12
W-CDMA: B2, B5
|AUS, EXP||LTE (4G): B1, B3, B5, B7, B8, B28
W-CDMA: B1, B5
|Rated output power||0.25 W|
|Receiver sensitivity (QPSK)||–102 dBm typ.|
|Compatibility||IP501H, IP503H, IP501M, IP500APP, VE-PG4|
(* Depending on the version)
|136 – 174 MHz||350 – 470 MHz,
400 – 520 MHz
|Number of conventional channels||128 channels /8 zone|
|Type of emission*
(* Depending on the version)
|USA||11K0F3E (15.0 kHz), 4K00F1E, 4K00F1D (6.25 kHz)|
|EUR, EXP, AUS||8K50F3E (12.5 kHz), 4K00F1E, 4K00F1D (6.25 kHz)|
|Output power||(Hi, L2, L1) 5 W, 2 W, 1 W|
|Frequency stability||±1.0 ppm|
|Spurious emissions||90 dB typ. (TIA-603)|
|0.25 μW (≤ 1 GHz), 1.00 μW (> 1 GHz) (EN301 166, EN300 086)|
|FM hum and noise (Without CCITT filter)||60 dB typ. (TIA-603)|
|FSK error||5% max. 1% typ. (EN301 166)|
|–6.5 dBμV emf typ. (0.24 μV typ.)
|–7 dBμV emf typ. (0.22 μV typ.)
(12 dB SINAD)
|0.22 μV typ. (TIA-603)||0.17 μV typ. (TIA-603)|
(20 dB SINAD)
|–2 dBμV emf typ. (0.4 μV typ.)
|–2 dBμV emf typ. (0.4 μV typ.)
|Digital||62 dB typ. (EN301 166)||63 dB typ. (EN301 166)|
|Analogue||67 dB typ.||67 dB typ.|
|Digital||76.5 dBμV emf typ. (EN301 166)||73 dBμV emf typ. (EN301 166)|
|Analogue||74 dB typ. (TIA-603)
67 dB typ. (EN300 086)
|72 dB typ. (TIA-603)
66 dB typ. (EN300 086)
|Hum and noise
(Without CCITT filter)
|60 dB typ. (TIA-603)||60 dB typ. (TIA-603)|
Measurements made in accordance with 3GPP TS-36, TIA-603, EN300 086 and EN301 166.
All stated specifications are subject to change without notice or obligation.
Applicable U.S. Military Specifications
|Low Pressure||500.5||I, II|
|High Temperature||501.5||I, II|
|Low Temperature||502.5||I, II|
|Rain Blowing/Drip||506.5||I, III|
Also meets equivalent MIL-STD-810-C, -D, -E and -F.
|Ingress Protection Standard|
|Dust & Water||IP67 (Dust-tight and waterproof)|
|Battery Pack||Type||Capacity||Operating time*|
|BP-303||Li-ion, 7.2V||3350 mAh (typ.)
3200 mAh (min.)
|Up to 24 hours||Up to 13 hours (at 5 W)
Up to 15 hours (at 1 W)
* Bluetooth® OFF, Backlight OFF, Duty cycle TX: RX: Stand-by = 5: 5: 90 ratio.
- Battery pack, BP-303
- Belt clip, MB-133
(May differ, or not supplied, depending on version)
Catalogs / Brochures
Instruction Manual / Guides
Promotion video of IP730D/IP740D
Icom Solutions for Utilities (LTE, Hybrid and Satellite Transceivers)
Ingress Protection (IP) Code
Ingress Protection (IP) ratings define the level of protection provided by enclosures to prevent the ingress of foreign objects (dust) and liquid into the electrical equipment.
International Standard IEC 60529 outlines an international classification system that describes the sealing characteristics of electrical equipment.
The classification system uses the “IP” code, or “Ingress Protection” code, to define the level of seal.
An IP number contains two numbers (i.e. IP67) in most instances which relate to the level of protection provided by an enclosure or housing.
Either number may be shown as “X” (i.e. IPX6 / IP7X) to indicate the “X” part is not tested.
Degrees of Solid Particle Protection – 1st Digit
|IP6x||No ingress of dust; complete protection against contact. (Dust tight)|
|IP5x||Protected from the amount of dust that would interfere with normal operation. (Dust protected)|
Degrees of Liquid Ingress Protection – 2nd Digit
|IPx8||Protected against continuous immersion in water.
Depth and duration specified by model.
|IPx7||Protected against temporary immersion in water for 1 m (3.3 ft) for 30 minutes|
|IPx6||Protected against water projected by powerful jets from any direction.
100 L per minute by a powerful jets (12.5 mm) for 3 minutes.
|IPx5||Protected against water projected by jets from any direction.
12.5 L per minute by a nozzle (6.3 mm) for 3 minutes.
|IPx4||Protected against water splashed against the equipment from any direction|