Important Notices
Descriptions
・Remotely controls the receiver from your PC
Minimum System Requirements
| Operating System | Windows 11 (64-bit) Windows 10 (32-bit/64-bit) (Windows on ARM processors is not supported.) |
|---|---|
| CPU |
1.8 GHz Processor or better (Multi-core Processor required for Windows 11) |
| Memory | Windows 11 (64-bit): 4 GB or more Windows 10 (32-bit): 2 GB or more Windows 10 (64-bit): 4 GB or more |
| HDD |
70 MB or more of available disk space. (The recording function will need more space.) |
| Display Resolution | 1024 × 600 pixels, or more |
| Network Data Speed |
Upload 350 kbps, or faster Download 500 kbps, or faster (When the default audio quality is used) |
| Note |
We recommend the use of the on-board sound chipset. The CPU may have a heavy load when an external sound device, such as USB audio converter, is used. |
Catalogs / Brochures
| Brochures Name | Size |
|---|---|
| RS-R8600 | 408KB |
Instruction Manual / Guides
| Name | Model Name | Note |
|---|---|---|
| Remote Encoder for RS-BA1 | RC-28 | |
| Preparations Version 1.01 | RS-R8600 | |
| Instruction Manual Version 1.01 | RS-R8600 | |
| Installation Guide for Windows 11/10/8.1 USB3.0 Supported | USB Driver (Ver.1.30) CS-7100/CS-9100/CS-9700/CS-R8600/IC-7300/RS-BA1/RS-R8600 |
Firmware / Software
| Type | Model Name | Version | Last Update |
|---|---|---|---|
| Control software | RS-R8600 | Version 1.01 | 2021.12.24 |
CloseIngress Protection (IP) Code
Ingress Protection (IP) ratings define the level of protection provided by enclosures to prevent the ingress of foreign objects (dust) and liquid into the electrical equipment.
International Standard IEC 60529 outlines an international classification system that describes the sealing characteristics of electrical equipment.
The classification system uses the “IP” code, or “Ingress Protection” code, to define the level of seal.
An IP number contains two numbers (i.e. IP67) in most instances which relate to the level of protection provided by an enclosure or housing.
Either number may be shown as “X” (i.e. IPX6 / IP7X) to indicate the “X” part is not tested.
Degrees of Solid Particle Protection – 1st Digit
| IP6x | No ingress of dust; complete protection against contact. (Dust tight) |
|---|---|
| IP5x | Protected from the amount of dust that would interfere with normal operation. (Dust protected) |
Degrees of Liquid Ingress Protection – 2nd Digit
| IPx8 | Protected against continuous immersion in water. Depth and duration specified by model. |
|---|---|
| IPx7 | Protected against temporary immersion in water for 1 m (3.3 ft) for 30 minutes |
| IPx6 | Protected against water projected by powerful jets from any direction. 100 L per minute by a powerful jets (12.5 mm) for 3 minutes. |
| IPx5 | Protected against water projected by jets from any direction. 12.5 L per minute by a nozzle (6.3 mm) for 3 minutes. |
| IPx4 | Protected against water splashed against the equipment from any direction |
