Portable Speakerphone for Icom IP Transceivers Provides Multi-Site Voice Conference
Multi-Site Voice Conference
For Voice Conferences Between the Head and Branch Offices
You can have an efficient meeting, as if all staff members were in the same room, regardless of the distance of the multiple locations.
For a Staff Room at an Event Site
All staff members in a back office can share information with other members in different locations at an event site. Quick information sharing can provide swifter and better service in a timely manner.
For Information Sharing in Disasters
A report from a stricken area through IP transceivers can be heard through the headquarters’ VE-SP1. Therefore, all members at headquarters can instantly be kept up-to-date on the emergency situation.
Variety of Operation Places
Instead of the supplied AC adapter, you can also use 8 LR6 (AA) alkaline batteries, so you can operate where there is no AC outlet. In addition, in case you run out of batteries, the speakerphone can be powered by the IP transceiver.
Wide Coverage*, Easy Access
Using an existing LTE (4G) and 3G network, the Icom IP transceivers are able to provide wide area and instantaneous communication.
* The coverage area depends on the country and service provider.
Easy to Carry, Compact, and Light
The weight is only about 595 grams (1.3 pounds). The design is rugged, and the size is compact and easy to carry around so that you can start a meeting in anywhere.
1100 mW of Large Audio, Suitable for Large Conference
Besides the internal microphone, an external microphone is supplied, and its cable length is 3 meters (9.84 feet). By using these two microphones, audio from a wider area can be picked up. Furthermore, if you use an optional external speaker, the output audio can be much louder and therefore it is well-suited for large conferences.
Able to Charge the IP Transceiver
When used with the AC adapter, you can simultaneously charge the IP transceiver.
|Power Supply Voltage||
12–16Ｖ DC, 8 LR6 (AA) alkaline batteries
216.8 × 52.8 × 173.3 ｍｍ, 8.5 × 2.1 × 6.8 in
Approximately 595 g, 1.3 lb（ Excluding alkaline batteries）
|Max. current drain||
Less than 1 A
–10 to +60°C, +14°F to +140°F
+10 to +40°C, +50°F to +104°F (When used with the AC adapter）
1.1 W (8 Ω load, 10% distortion)
IP501H, IP503H, IP503H Lite
- OPC-2397 Cable for the transceiver connection
- BC-242 AC adapter (USA, EUR, UK, and AUS input plugs included)
- SM-1 External microphone (With a PTT switch. Cable length: 3 m, 9.84 ft)
* The IP transceiver is not supplied.
Ingress Protection (IP) Code
Ingress Protection (IP) ratings define the level of protection provided by enclosures to prevent the ingress of foreign objects (dust) and liquid into the electrical equipment.
International Standard IEC 60529 outlines an international classification system that describes the sealing characteristics of electrical equipment.
The classification system uses the “IP” code, or “Ingress Protection” code, to define the level of seal.
An IP number contains two numbers (i.e. IP67) in most instances which relate to the level of protection provided by an enclosure or housing.
Either number may be shown as “X” (i.e. IPX6 / IP7X) to indicate the “X” part is not tested.
Degrees of Solid Particle Protection – 1st Digit
|IP6x||No ingress of dust; complete protection against contact. (Dust tight)|
|IP5x||Protected from the amount of dust that would interfere with normal operation. (Dust protected)|
Degrees of Liquid Ingress Protection – 2nd Digit
|IPx8||Protected against continuous immersion in water.
Depth and duration specified by model.
|IPx7||Protected against temporary immersion in water for 1 m (3.3 ft) for 30 minutes|
|IPx6||Protected against water projected by powerful jets from any direction.
100 L per minute by a powerful jets (12.5 mm) for 3 minutes.
|IPx5||Protected against water projected by jets from any direction.
12.5 L per minute by a nozzle (6.3 mm) for 3 minutes.
|IPx4||Protected against water splashed against the equipment from any direction|