Do you have any problem in storing your radio?
For user of optional products such as earphones and microphones.
Do you have a problem handling cords and cables during storage? Difficult to keep cords and cables neatly. Cords and cables get tangled. It is not possible to use radios immediately when you want to use.
Storing cords and cables with such as wrapping around radios or pinching by microphone clips, place stress on certain points which may cause disconnections or damages.
SolutionMicrophone holder for smart charging/installation/storage of radios
For fixing the microphone
It is possible to storage the radio with the microphone connected. From small microphones to large hand microphones can be fixed. The microphone holder can save space and be smart installation.
For storing cables and cords
It is difficult to keep neatness in cables and cords due to easily tangled. It can be easily store by wrapped them around the microphone holder. This storing reduces stress on certain points and support to extend the product life for cables and cords of microphones and earphones.
Compatible with connectable chargers
The microphone holder is compatible with connectable chargers. Even in adjacent charging spaces, it is possible to charge the battery with keeping neatness in cable and cords with the microphone holder.
3 options for installation
Stable installation
with Non-slip Dot stickers
Non-slip Dot stickers (4 pcs) are supplied. By attaching them to the bottom of the microphone holder, it can be installed on a tabletop without slipping.
Fixing a charger on the microhome holder with Double-sided tape
When using the microphone holder together with a charger, the supplied double-sided tape can be cut to the desired size and the charger and microphone holder can be fixed.
Screwing the microphone holder and charger to the base
There are screw holes on the bottom of the microphone holder. The microphone holder and charger can be screwed together to a desk, shelf, or other installation location.
*Screws are required separately
|
Compatible chargers (in May 2022) |
Please contact your local distributor about the availability.
Dimension diagram
Specifications
| Size (H x W x D) | 242.5 x 84 x 112.8 mm / 9.55 x 3.31 x 4.44 inch |
|---|---|
| Weight | 110 g / 3.88 oz (approx.) |
| Material | Main body : Polyester Holder : Synthetic leather |
Accessories
- ・Double-sided tape
- ・Non-slip Dot Sticker (4 pcs.)
- ・Instruction Manual
Catalogs / Brochures
| Brochures Name | Size |
|---|---|
| MicrophoneHolder | 426KB |
CloseCloseIngress Protection (IP) Code
Ingress Protection (IP) ratings define the level of protection provided by enclosures to prevent the ingress of foreign objects (dust) and liquid into the electrical equipment.
International Standard IEC 60529 outlines an international classification system that describes the sealing characteristics of electrical equipment.
The classification system uses the “IP” code, or “Ingress Protection” code, to define the level of seal.
An IP number contains two numbers (i.e. IP67) in most instances which relate to the level of protection provided by an enclosure or housing.
Either number may be shown as “X” (i.e. IPX6 / IP7X) to indicate the “X” part is not tested.
Degrees of Solid Particle Protection – 1st Digit
| IP6x | No ingress of dust; complete protection against contact. (Dust tight) |
|---|---|
| IP5x | Protected from the amount of dust that would interfere with normal operation. (Dust protected) |
Degrees of Liquid Ingress Protection – 2nd Digit
| IPx8 | Protected against continuous immersion in water. Depth and duration specified by model. |
|---|---|
| IPx7 | Protected against temporary immersion in water for 1 m (3.3 ft) for 30 minutes |
| IPx6 | Protected against water projected by powerful jets from any direction. 100 L per minute by a powerful jets (12.5 mm) for 3 minutes. |
| IPx5 | Protected against water projected by jets from any direction. 12.5 L per minute by a nozzle (6.3 mm) for 3 minutes. |
| IPx4 | Protected against water splashed against the equipment from any direction |
