IP Transceiver
IP501M
Wide Coverage Over an LTE (4G) and 3G Network, Mobile LTE Radio Interoperable with IP501H/IP503H
Nationwide Coverage over LTE (4G) and 3G Networks*
Interoperable with the Handheld IP501H/IP503H
Simultaneous TalkListen Function for Full-Duplex Communication
Priority Interrupt Calling Can Break into an On-going Call for an Important Message
Text Message Function Allows You to Send and Receive Messages of up to 32 Characters
Safety Features with Emergency Call & Lone Worker Functions
An Ethernet Port for Data Communication*
D-SUB 25-pin Connector with the Optional OPC-2407 Cable for Interfacing Other Devices, Various Controls and Data Communication
ACC Connector for Ignition Sensing Function
Noise Canceling Function (TX only) for Clear Audio in Noisy Environments
Built-in Bluetooth®* and GPS
* Version without Bluetooth also available. Ask your Dealer for details.
Optional COMMANDMIC™ Provides a Handheld-like User Interface

Optional COMMANDMIC™
Interconnection with the IP100H and IDAS™ Systems Using the VE-PG4, RoIP Gateway

With a VE-PG4 RoIP gateway, the LTE radio system can interconnect with an IP phone, IP, IDAS™ digital and analog radios.
Dimensions
Rear Panel View

General
Current drain (Maximum) |
TX | Less than 0.6 A (13.8 V DC) Less than 0.4 A (26.4 V DC) |
---|---|---|
RX | Less than 1.2 A (13.8 V DC) Less than 0.8 A (26.4 V DC) |
|
Operating temperature range | –10°C to +60°C; 14°F to +140°F | |
Dimensions (W × H × D) (Projections not included) | 125 × 29 × 156 mm; 4.9 × 1.1 × 6.1 in (Approximate) | |
Weight | 840 g; 1.9 lb (Main unit, approximate) | |
Voice codec | G. 726 | |
Audio output power | More than 4 W (External SP, at 10% distortion into a 4 Ω load) | |
External microphone impedance | 600 Ω |
All stated specifications are subject to change without notice or obligation.
Interface
Network | 4G bands | LTE B2, B4, B12 (USA) LTE B1, B3, B7, B8, B20 (EXP) LTE B1, B3, B5, B7, B8, B28 (AUS) |
---|---|---|
3G bands | W-CDMA B2, B5 (USA) W-CDMA B1, B8 (EXP) W-CDMA B1, B5 (AUS) |
|
Bluetooth®* | Version 2.1 +EDR | |
LAN | RJ-45 type x 1 (Auto MDI/MDI-X) 10BASE-T/100BASE-TX |
|
External speaker jack | 3.5 mm (1/8 in) (d), 4 Ω | |
External equipment connector | D-SUB 25-pin type (The optional OPC-2407 is required) |
* Version without Bluetooth also available. Ask your Dealer for details.
All stated specifications are subject to change without notice or obligation.
Applicable U.S. Military Specifications & IP Rating
Standard |
MIL-810 G | |
---|---|---|
Method | Procedure | |
Low Pressure | 500.5 | I, II |
High Temperature | 501.5 | I, II |
Low Temperature | 502.5 | I, II |
Temperature Shock | 503.5 | I-C |
Solar Radiation | 505.5 | I |
Rain Blowing/Drip | 506.5 | I, III |
Dust Blowing | 510.5 | I |
Immersion | 512.5 | I |
Vibration | 514.6 | I |
Shock | 516.6 | I, IV |
Also meets equivalent MIL-STD-810 -C, -D, -E and -F.
Ingress Protection Standard | |
---|---|
Dust and Water | IP54 (Dust-protection, water resistance) |
Supplied Accessories
- HM-241, speaker microphone
- LTE antenna (2 pcs)
- GPS antenna
- DC power cable
- Mounting bracket kit
- Microphone hanger
MICROPHONES
EXTERNAL SPEAKERS
EXTENSION CABLES
ADAPTER CABLES
Catalogs / Brochures
Brochures Name | Size |
---|---|
IP501M | 1.22MB |
Professional Radios | 10.20MB |
Business Radio Solutions(European Edition) | 61.95MB |
LTE Radios | 3.22MB |
LTE Radios (European Edition) | 3.33MB |
Instruction Manual / Guides
Name | Model Name | Note |
---|---|---|
INSTRUCTION MANUAL | IP501M | |
OPERATING GUIDE | IP501M | |
DOC (DECLARATION OF CONFORMITY) (Built-in Bluetooth) | IP501M | |
DICHIARAZIONE DI CONFORMITA UE(ITALIANO) (Built-in Bluetooth) | IP501M | |
DOC (DECLARATION OF CONFORMITY) (Non-Bluetooth) | IP501M | |
DICHIARAZIONE DI CONFORMITA UE(ITALIANO) (Non-Bluetooth) | IP501M |



Ingress Protection (IP) Code
Ingress Protection (IP) ratings define the level of protection provided by enclosures to prevent the ingress of foreign objects (dust) and liquid into the electrical equipment.
International Standard IEC 60529 outlines an international classification system that describes the sealing characteristics of electrical equipment.
The classification system uses the “IP” code, or “Ingress Protection” code, to define the level of seal.
An IP number contains two numbers (i.e. IP67) in most instances which relate to the level of protection provided by an enclosure or housing.
Either number may be shown as “X” (i.e. IPX6 / IP7X) to indicate the “X” part is not tested.


Degrees of Solid Particle Protection – 1st Digit
IP6x | No ingress of dust; complete protection against contact. (Dust tight) |
---|---|
IP5x | Protected from the amount of dust that would interfere with normal operation. (Dust protected) |
Degrees of Liquid Ingress Protection – 2nd Digit
IPx8 | Protected against continuous immersion in water. Depth and duration specified by model. |
---|---|
IPx7 | Protected against temporary immersion in water for 1 m (3.3 ft) for 30 minutes |
IPx6 | Protected against water projected by powerful jets from any direction. 100 L per minute by a powerful jets (12.5 mm) for 3 minutes. |
IPx5 | Protected against water projected by jets from any direction. 12.5 L per minute by a nozzle (6.3 mm) for 3 minutes. |
IPx4 | Protected against water splashed against the equipment from any direction |
