Descriptions
- The IP100FS can communicate with IP communication terminals from a PC.
- The IP100FS can obtain location information of each Wi-Fi radio (such as IP110H) based on the access point being used.
- Management functions such as remote lock function.
- Can be installed on a Windows® based tablet PC as well as a laptop PC.
- Supplied with a USB flash drive.
- The USB flash drive must be inserted into the USB port when installing and starting the IP100FS.
Specifications（System requirements）
| Operating system |
Microsoft® Windows ™ 11 |
|---|---|
| CPU | Intel® Core™ 2 Duo Processor E6600/2.4GHz or better |
| Memory | 2GB or higher |
| Hard disk space | 1GB of disk space (to save log files) |
| Audio | DirectSound compatible audio (Frequency response up to 20kHz, sampling rate 48kHz) |
| Display resolution | 1920×1080 pixel recommended 1024×768 pixel minimum |
| Other | USB 2.0 port, 10Mbps or faster Ethernet interface, speaker, microphone or headset |
MICROPHONES
AC ADAPTERS
EXTERNAL DEVICES
Instruction Manual / Guides
| Name | Model Name | Note |
|---|---|---|
| Instruction Manual | IP100FS |
CloseCloseIngress Protection (IP) Code
Ingress Protection (IP) ratings define the level of protection provided by enclosures to prevent the ingress of foreign objects (dust) and liquid into the electrical equipment.
International Standard IEC 60529 outlines an international classification system that describes the sealing characteristics of electrical equipment.
The classification system uses the “IP” code, or “Ingress Protection” code, to define the level of seal.
An IP number contains two numbers (i.e. IP67) in most instances which relate to the level of protection provided by an enclosure or housing.
Either number may be shown as “X” (i.e. IPX6 / IP7X) to indicate the “X” part is not tested.
Degrees of Solid Particle Protection – 1st Digit
| IP6x | No ingress of dust; complete protection against contact. (Dust tight) |
|---|---|
| IP5x | Protected from the amount of dust that would interfere with normal operation. (Dust protected) |
Degrees of Liquid Ingress Protection – 2nd Digit
| IPx8 | Protected against continuous immersion in water. Depth and duration specified by model. |
|---|---|
| IPx7 | Protected against temporary immersion in water for 1 m (3.3 ft) for 30 minutes |
| IPx6 | Protected against water projected by powerful jets from any direction. 100 L per minute by a powerful jets (12.5 mm) for 3 minutes. |
| IPx5 | Protected against water projected by jets from any direction. 12.5 L per minute by a nozzle (6.3 mm) for 3 minutes. |
| IPx4 | Protected against water splashed against the equipment from any direction |
