Icom Custom High Power Handling Capacity Speaker for 1500 mW Powerful Audio
1500mW powerful audio
IP67 Waterproof and Dust-tight Protection
IP67 Waterproofing
5.5 W/4 W (VHF/UHF) of Output Power
Up to 10 Hours of Operating Time with the Supplied Waterproof Battery
128 Memory Channels and Eight Zones
Eight Character Alphanumeric Display
Built-in CTCSS and DTCS Encoder/Decoder
Eight DTMF Autodial Memories
MDC 1200 PTT ID and BIIS 1200 PTT ID
Inversion Voice Scrambler (16 code) for Private Conversations
Channel Announcement of the Operating Channel Number
Seven Programmable Buttons with Shift Key Function
16 Scan Lists and Priority Scan Functions
Hands-Free Operation with the Optional Headset
General
| IC-V88 | IC-U88 | ||
|---|---|---|---|
| Frequency coverage |
136MHz–174MHz |
335MHz–380MHz |
|
| Type of emission |
16K0F3E, 11K0F3E (25/12.5kHz) |
||
| Number of channels |
128 channels |
||
| Antenna impedance |
50Ω |
||
| Power supply requirement |
7.5V DC |
||
| Operating temperature range |
−30°C to +60°C (Radio only) |
||
| Frequency stability |
±2.5ppm |
||
| Current drain (approx.) |
Tx High | 1.5A | 1.3A |
| Rx Max. audio/Stand-by |
500 mA |
500 mA |
|
| Dimensions (W×H×D) (Projections not included) |
52.2×111.8×22.3 mm (with BP-278) |
||
| Weight |
230g (with BP-278) |
||
Transmitter
| IC-V88 | IC-U88 | |
|---|---|---|
| Output power (at 7.5V) |
5.5/2.0/1.0W |
4.0W/2.0W/1.0W |
| Max. frequency deviation |
±5.0kHz/±2.5kHz (Wide/Narrow) |
|
| Spurious emissions |
70dB min. |
|
| Ext. microphone connector |
3-conductor 2.5(d)mm (1/10″)/2.2kΩ |
|
Receiver
| IC-V88 | IC-U88 | ||
|---|---|---|---|
| Sensitivity |
0.25μV typ. (at 12dB SINAD) |
||
| Squelch sensitivity |
0.25μV typ. (at threshold) |
||
| Adjacent channel selectivity |
76dB/53dB typ. |
73dB/56dB typ. |
|
| Intermodulation |
74dB typ. |
73dB typ. |
|
| Spurious response |
70dB min. |
||
| Audio output power | Internal SP |
1500 mW typ. (8Ω load) |
|
| External SP |
400 mW typ. (8Ω load) |
||
| External speaker connector |
3-conductor 3.5(d)mm (1/8″)/8Ω |
||
Applicable U.S. Military Specifications
Icom makes rugged products that have been tested to and passed the following MIL-STD requirements and strict environmental standards.
| Standard |
MIL-810 G | |
|---|---|---|
| Method | Procedure | |
| Low Pressure Storage |
500.5 |
I |
| Low Pressure Operation |
500.5 |
II |
| High Temperature Storage |
501.5 |
I |
| High Temperature Operation |
501.5 |
II |
| Low Temperature Storage |
502.5 |
I |
| Low Temperature Operation |
502.5 |
II |
| Temperature Shock |
503.5 |
I-C |
| Solar Radiation |
505.5 |
I |
| Rain Blowing |
506.5 |
I |
| Rain Drip |
506.5 III |
III |
| Humidity Induced |
507.5 |
II |
| Salt Fog |
509.5 |
- |
| Dust Blowing |
510.5 |
I |
| Immersion |
512.5 |
I |
| Vibration |
514.6 |
I |
| Shock Functional |
516.6 |
I |
| Shock Transit Drop |
516.6 |
IV |
Also meets equivalent MIL-STD-810-C, -D -E and -F.
| Ingress Protection Standards | |
|---|---|
| Dust & Water |
IP67 (Dust-tight and waterproof protection) |
All stated specifications are subject to change without notice or obligation
Supplied Accessories
- Battery pack, BP-278
- Desktop charger, BC-213
- AC adapter, BC-242
- Belt clip, MB-133
- Antenna
(May differ, depending on version)
MICROPHONES
HEADSETS
PTT/VOX CABLES
CHARGERS
AC ADAPTERS
POWER SUPPLY CABLES
MOUNTING BRACKETS
BELT CLIPS
ANTENNAS
Catalogs / Brochures
| Brochures Name | Size |
|---|---|
| IC-V88/IC-U88 | 1.21MB |
Instruction Manual / Guides
| Name | Model Name | Note |
|---|---|---|
| INSTRUCTIONS (1) | IC-V88 |
CloseCloseIngress Protection (IP) Code
Ingress Protection (IP) ratings define the level of protection provided by enclosures to prevent the ingress of foreign objects (dust) and liquid into the electrical equipment.
International Standard IEC 60529 outlines an international classification system that describes the sealing characteristics of electrical equipment.
The classification system uses the “IP” code, or “Ingress Protection” code, to define the level of seal.
An IP number contains two numbers (i.e. IP67) in most instances which relate to the level of protection provided by an enclosure or housing.
Either number may be shown as “X” (i.e. IPX6 / IP7X) to indicate the “X” part is not tested.
Degrees of Solid Particle Protection – 1st Digit
| IP6x | No ingress of dust; complete protection against contact. (Dust tight) |
|---|---|
| IP5x | Protected from the amount of dust that would interfere with normal operation. (Dust protected) |
Degrees of Liquid Ingress Protection – 2nd Digit
| IPx8 | Protected against continuous immersion in water. Depth and duration specified by model. |
|---|---|
| IPx7 | Protected against temporary immersion in water for 1 m (3.3 ft) for 30 minutes |
| IPx6 | Protected against water projected by powerful jets from any direction. 100 L per minute by a powerful jets (12.5 mm) for 3 minutes. |
| IPx5 | Protected against water projected by jets from any direction. 12.5 L per minute by a nozzle (6.3 mm) for 3 minutes. |
| IPx4 | Protected against water splashed against the equipment from any direction |
