* Wide open space
7 W Output Power Plus New Antenna Provides 1.5 Times* More Communication Distance
* Wide open space. Approximate, comparing the IC-V86 with the IC-V80. Communication range may differ depending on operating environment or weather conditions, etc. 7 W output power is only for theIC-V86.
1500 mW powerful audio
1500 mW Powerful Audio and 1.5 Times* Higher Sound Pressure
* Approximate, comparing the IC-V86 with the IC-V80.
Optional 1500 mW Speaker-Microphone, HM-222HLWP
The combination of the optional HM-222HLWP and the IC-V86/U86* also provides 1500 mW (typ.) loud audio from the attached speaker-microphone.
* For the transceiver with a "U" mark on the serial number label.
Dust-Protection, Water Resistance and a Tough Body
(IP54 and MIL-STD 810G)
19 hours* of Long Lasting Battery Life
* EX Hi power with BP-298. TX : RX : standby = 5 : 5 : 90 (3 sec. : 3 sec. : 54 sec. ) (The Power Save function is set to "P–S.16")
No PC Programming Necessary, Settings Changeable from the Radio*
* PC programming is also available.
Durable BNC Type Antenna Connector
Made in Japan Quality and Reliability
Other Features
- Audio volume/VFO mode/Memory channel mode can be changed with the rotary knob
- Supplied BC-240, battery charger with a charging control function that prolongs the life of the battery
- Integrated VOX function
- 200 memory channels, 1 Call channel and 6 scan edges
- Built-in CTCSS and DTCS encoder/decoder
- Priority, program, memory, skip and tone scanning
General
| IC-V86 | IC-U86 | ||
|---|---|---|---|
| Frequency range (TX/RX guaranteed range) |
136–174 MHz |
EXP1 : 400–472 MHz |
|
| Type of emissions |
F2D, F3E (FM, FM-N) |
||
| Number of channels |
207 channels (200 memory channels, 1 call channel and 6 scan edges) |
||
| Antenna impedance |
50Ω |
||
| Power supply requirement |
7.5V DC |
||
| Operating temperature range |
–20 ˚C to +60 ˚C, –4 °F to +140 °F |
||
| Frequency stability |
±2.5ppm (–20 ˚C to +60 ˚C, –4 °F to +140 °F) |
||
| Current drain (For the transceiver with a "U" mark on the serial number label) |
TX (EX Hi/Hi/Mid/Low) |
1.6/1.4/1.0/0.5 A typical | EXP1: 1.6/1.5/1.0/0.5 A typ. EXP2: 1.6/1.4/0.9/0.5 A typ. |
| RX (Max. audio) |
450 mA typ. (INT SP), |
450 mA typ. (INT SP), |
|
| Dimensions (W×H×D) (Projections not included) |
58.6 × 112 × 30.5 mm, 2.3 × 4.4 × 1.2 in |
||
| Weight (Approximate) |
300 g, 10.6 oz |
290 g, 10.2 oz |
|
Transmitter
| IC-V86 | IC-U86 | |
|---|---|---|
| Output power (EX Hi/Hi/Mid/Low) |
7.0/5.5/2.5/0.5 W |
5.5/4/2/0.5 W |
| Maximum frequency deviation |
±5.0 kHz/±2.5 kHz (Wide/Narrow) |
|
| Spurious emissions |
Less than –60 dB |
|
| External microphone connector |
3-conductor 2.5 (d) mm (1/10")/2.2 kΩ |
|
Receiver
| IC-V86 | IC-U86 | ||
|---|---|---|---|
| Sensitivity |
–124 dBm typical |
EXP1: –121 dBm typical |
|
| Squelch sensitivity |
–126 dBm typical |
EXP1: –123 dBm typical |
|
| Selectivity (Wide/Narrow) |
75 dB typical/ 70 dB typical |
70 dB typical/ 68 dB typical |
|
| Intermodulation |
65 dB typical |
||
| Audio output power (5% distortion with 8 Ω load) (For the transceiver with a "U" mark on the serial number label) |
Internal SP |
1500 mW typical |
|
| External SP |
450 mW typical (single end) |
||
| External speaker connector |
3-conductor 3.5(d)mm (1/8″)/8Ω |
||
Applicable U.S. Military Specifications
| Standard |
MIL-810 G | |
|---|---|---|
|
|
|
|
| Low Pressure | 500.5 | I, II |
| High Temperature | 501.5 | I, II |
| Low Temperature | 502.5 | I, II |
| Temperature Shock | 503.5 | I-C |
| Solar Radiation | 505.5 | I |
| Rain Blowing/Drip | 506.5 | I, III |
| Humidity | 507.5 | II |
| Salt Fog | 509.5 | – |
| Dust Blowing | 510.5 | I |
| Vibration | 514.6 | I |
| Shock | 516.6 | I, IV |
Also meets equivalent MIL-STD-810-C, -D, -E and -F.
Applicable IP Rating
| Ingress Protection Standard | ||
|---|---|---|
| Dust and Water | IP54 (Dust-protection, water resistance) | |
All stated specifications are subject to change without notice or obligation
Supplied Accessories
- BP-298/BP-264, battery pack*
- BC-240, Desktop charger
- BC-242, AC adapter
- MB-124, belt clip
- Antenna*
* May differ, depending on transceiver version
MICROPHONES
HEADSETS
PTT/VOX CABLES
BATTERIES
CHARGERS
POWER SUPPLY CABLES
MOUNTING BRACKETS
BELT CLIPS
ANTENNAS
SOFTWARE
PROGRAMMING/DATA CABLES
CABLES
Catalogs / Brochures
| Brochures Name | Size |
|---|---|
| IC-V86/IC-U86 | 2.63MB |
Instruction Manual / Guides
| Name | Model Name | Note |
|---|---|---|
| BASIC MANUAL | IC-V86/IC-U86 | |
| ADVANCED MANUAL | IC-V86/IC-U86 |
CloseCloseIngress Protection (IP) Code
Ingress Protection (IP) ratings define the level of protection provided by enclosures to prevent the ingress of foreign objects (dust) and liquid into the electrical equipment.
International Standard IEC 60529 outlines an international classification system that describes the sealing characteristics of electrical equipment.
The classification system uses the “IP” code, or “Ingress Protection” code, to define the level of seal.
An IP number contains two numbers (i.e. IP67) in most instances which relate to the level of protection provided by an enclosure or housing.
Either number may be shown as “X” (i.e. IPX6 / IP7X) to indicate the “X” part is not tested.
Degrees of Solid Particle Protection – 1st Digit
| IP6x | No ingress of dust; complete protection against contact. (Dust tight) |
|---|---|
| IP5x | Protected from the amount of dust that would interfere with normal operation. (Dust protected) |
Degrees of Liquid Ingress Protection – 2nd Digit
| IPx8 | Protected against continuous immersion in water. Depth and duration specified by model. |
|---|---|
| IPx7 | Protected against temporary immersion in water for 1 m (3.3 ft) for 30 minutes |
| IPx6 | Protected against water projected by powerful jets from any direction. 100 L per minute by a powerful jets (12.5 mm) for 3 minutes. |
| IPx5 | Protected against water projected by jets from any direction. 12.5 L per minute by a nozzle (6.3 mm) for 3 minutes. |
| IPx4 | Protected against water splashed against the equipment from any direction |
