AIS Receiver and DSC in One Package
AIS receiver and DSC function add further assurance for safety at sea. With the integrated AIS receiver, vessel traffic information is shown on the display. The AIS target call function allows you to easily set up a DSC individual call. Distress calls can be made with the rear panel button.
6 W RF Output Power and 10 Hours of Operating Time
The IC-M94D’s 6 watts of transmit power provides extended communication range for the user. The supplied 2400 mAh (typical) high capacity Li-ion battery, BP-306 provides 10 hours of operating time, under normal conditions*.
* Approximate, typical operation with 5:5:90 duty ratio.
Class-Leading 1500 mW Audio Output
Icom’s custom high-power capacity speaker delivers a loud 1500 mW (typical) audio output with improved acoustic sound clarity for noisy maritime environments.
Simplified Navigation Function
The Navigation function guides you to a specified waypoint. You can assign up to 50 favorite fishing spots or destinations as waypoints.
Float’n Flash and MOB Auto Set Functions
The radio floats and the LCD screen, keys and rear panel Distress button flash to help you retrieve it from the water. Pressing the distress button while Float’n Flash is working will transmit the MOB distress signal, rather than the plain undesignated one for better protection of sailors.
Other Features
- Integrated GPS receiver
- Active noise canceling technology
- IPX7 submersible (1 m depth of water for 30 minutes)
- Weather channel receive (for USA version)
- Dualwatch and Tri-watch functions
- Favorite channel function
- Supports 4-digit channels
- AquaQuake™ prevents audio degradation from a water-logged speaker
General
Frequency range | Tx | 156.025–157.425 MHz |
---|---|---|
Rx | 156.050–163.275 MHz | |
Rx (CH70) | 156.525 MHz | |
RX (AIS) | 162.025 MHz | |
Usable channel groups | INT, USA, CAN, WX channels | |
Type of emission | 16K0G3E (FM), 16K0G2B (DSC), 16K0GXW (GMSK) | |
Current drain (at 7.2 V DC) |
TX (6 W/1 W output) | 1500 mA/700 mA (approx.) |
RX (Inter SP/Exter SP Max. audio) | 700 mA/350 mA (approx.) | |
Operating temperature range | –20°C to +60°C; –4˚F to +140˚F | |
Antenna impedance | 50 Ω | |
Dimensions (W×H×D) (Projections not included) |
60.9 × 145.8 × 43.8 mm; 2.4 × 5.7 × 1.7 in |
|
Weight (approximately) | 357 g ; 12.6 oz (With BP-306, antenna, MB-133) |
Transmitter
Output power (Hi/Low) | 6 W/1 W | |
---|---|---|
Max. frequency deviation | ±5 kHz | |
Frequency stability | ±10 ppm | |
Spurious emissions | –68 dBc typical |
Receiver
Sensitivity (at 12 dB SINAD) DSC receiver (at 1% BER) AIS receiver (at 20% PER) |
0.25 μV typical –3 dBμ emf typical –107 dBm |
|
---|---|---|
Squelch sensitivity (Threshold) | 0.25 μV typical | |
Adjacent channel selectivity DSC receiver (at 1% BER) AIS receiver (at 20% PER) |
70 dB typical 73 dBμ emf 50 dB typical |
|
Spurious response DSC receiver (at 1% BER) AIS receiver (at 20% PER) |
70 dB typical 73 dBμ emf 50 dB typical |
|
Intermodulation DSC receiver (at 1% BER) AIS receiver (at 20% PER) |
70 dB typical 68 dBμ emf 50 dB typical |
|
Hum and noise | 40 dB | |
Audio output power (at 10% distortion) |
Internal SP | 1500 mW typical (8 Ω load) |
External SP | 350 mW typical (8 Ω load) |
Measurements made in accordance with TIA/EIA-603. All stated specifications are subject to change without notice or obligation.
Applicable U.S. Military Specifications & IP Rating
Standard |
MIL-810 G | |
---|---|---|
Method | Procedure | |
Low Pressure |
500.5 |
I, II |
High Temperature |
501.5 |
I, II |
Low Temperature |
502.5 |
I, II |
Temperature Shock |
503.5 |
I-C |
Solar Radiation |
505.5 |
I |
Rain Blowing/Drip |
506.5 |
I, III |
Humidity |
507.5 |
II |
Salt Fog |
509.5 |
- |
Dust Blowing |
510.5 |
I |
Immersion |
512.5 |
I |
Vibration |
514.6 |
I |
Shock |
516.6 |
I, IV |
Also meets equivalent MIL-STD-810-C, -D, -E and -F.
Ingress Protection Standards | |
---|---|
Water |
IPX7 (Waterproof protection) |
All stated specifications are subject to change without notice or obligation.
Supplied Accessories
- BP-306 battery pack
- BC-251 battery charger
- AC adapter*
- CP-26 cigarette lighter cable
- MB-133 belt clip
- Antenna
- Hand strap
* May differ depending on version
AC ADAPTERS
POWER SUPPLY CABLES
BELT CLIPS
BELT HANGERS
Catalogs / Brochures
Brochures Name | Size |
---|---|
Marine Products | 6.48MB |
IC-M94D | 1.03MB |
Instruction Manual / Guides
Name | Model Name | Note |
---|---|---|
INSTRUCTION MANUAL | IC-M94D/IC-M94DE |
IC-M94D Promotion Video
Ingress Protection (IP) Code
Ingress Protection (IP) ratings define the level of protection provided by enclosures to prevent the ingress of foreign objects (dust) and liquid into the electrical equipment.
International Standard IEC 60529 outlines an international classification system that describes the sealing characteristics of electrical equipment.
The classification system uses the “IP” code, or “Ingress Protection” code, to define the level of seal.
An IP number contains two numbers (i.e. IP67) in most instances which relate to the level of protection provided by an enclosure or housing.
Either number may be shown as “X” (i.e. IPX6 / IP7X) to indicate the “X” part is not tested.
Degrees of Solid Particle Protection – 1st Digit
IP6x | No ingress of dust; complete protection against contact. (Dust tight) |
---|---|
IP5x | Protected from the amount of dust that would interfere with normal operation. (Dust protected) |
Degrees of Liquid Ingress Protection – 2nd Digit
IPx8 | Protected against continuous immersion in water. Depth and duration specified by model. |
---|---|
IPx7 | Protected against temporary immersion in water for 1 m (3.3 ft) for 30 minutes |
IPx6 | Protected against water projected by powerful jets from any direction. 100 L per minute by a powerful jets (12.5 mm) for 3 minutes. |
IPx5 | Protected against water projected by jets from any direction. 12.5 L per minute by a nozzle (6.3 mm) for 3 minutes. |
IPx4 | Protected against water splashed against the equipment from any direction |