VHF MARINE TRANSCEIVER
Advanced VHF Radio that Complements Your Boat in Superior Performance, System Flexibility and User-Friendliness
Up to Three COMMAND HEAD™/COMMANDMIC™
The IC-M605EURO is our flagship Class D DSC radio. The radio can be remotely controlled with up to three controllers, RC-M600 COMMAND HEAD™ and/or HM-229B/W COMMANDMIC™, with an intercom function available among the main radio and controllers. Maximum operating flexibility anywhere on your boat.
Wide Viewing Angle 4.3” Colour TFT LCD
A high resolution colour LCD provides an almost 180 degree very wide viewing angle and displays characters and function icons clearly. The night mode display ensures good readability in the dark for further convenience.
Integrated AIS Receiver
With an integrated AIS receiver, the IC-M605EURO can show real-time AIS vessel traffic information on the display. The AIS combo screen enables you to monitor the AIS plotter during basic operation. You can directly call a selected AIS target from the AIS screen using an individual DSC call.
Intuitive User Interface
The combination of the directional keypad and soft keys provides simple operation. The most common functions are assigned to soft keys (at the bottom of the display) for quick push function access. The large ten-key pad enables you to smoothly enter channel numbers, MMSI numbers with ID names and so on.
Class Leading Receiver Performance
A weak signal adjacent to a strong signal can be clearly received by the IC-M605EURO. Its commercial grade receiver performance (selectivity and IMD: more than 75 dB) provides reliable communication at all time.
Active Noise Cancelling Technology
The Active Noise Cancelling technology digitally removes background noise from both transmit and receive audio and provides clear communication in a noisy maritime environment.
Last Call Voice Recording
The last call voice recording function automatically saves up to two minutes of an incoming call. Don’t miss any incoming messages.
With an optional voice scrambler unit, UT-112, the IC-M605EURO provides 32 tone secure conversation. This function is useful when you want to share private information with consort ships.
Provides Clear, Loud Audio
The IC-M605EURO’s internal speaker enhances intelligibility of received calls. The waterproof speaker cone provides superior sound quality with a wide frequency range and a flat frequency response for powerful, yet clear audio.
Integrated GNSS Receiver
The GNSS (GPS, GLONASS and SBAS) receiver is integrated in the IC-M605EURO. Position information can be simply received with connection to the supplied GNSS antenna with 5 m cable, UX-241.
30 W Two-Way Hailer and Automatic Foghorn
When connected to the optional SP-37 horn speaker, you can talk with crew on the deck or shore from the radio’s microphone and can hear any reply via the horn speaker. Also available the RX hailer function and four patterns of automatic foghorn.
NMEA 2000™, NMEA 0183/-HS Connectivity
Using NMEA 2000™ connectivity, the radio can exchange GNSS, AIS reports, DSC call information data, radio frequency and PGN list data on the network. NMEA 0183/-HS GNSS position data can also be converted to NMEA 2000™ data for other equipment.
・ IPX8 advanced waterproof (1 m depth of water for 60 minutes)
・ Dual and Tri-watch functions • AquaQuake™ draining function
・ Instant-access button for Channel 16 and call channel
・ Supplied speaker microphone, HM-205RB can be connected to the rear panel
・ Compatible with the Icom’s marine navigation system, MarineCommander™
・ Supports new four-digit channels effective from January 1, 2017
|Frequency range||TX*1||156.025–161.425 MHz|
|AIS1, 2||161.975, 162.025 MHz|
|Usable channels||INT, USA*2 channels|
|Type of emission||16K0G3E (FM), 16K0G2B (DSC)|
|Power supply requirement||13.8 V DC (10.8–15.6 V DC)|
(at 13.8 V DC)
|TX 25 W output||6.0 A|
|RX Max. audio||8.0 A|
|Operating temperature range||–20°C to +60°C|
|Antenna impedance||50 Ω (SO-239)|
|Weight (approximately)||1510 g; 3.3 lb|
*1Each frequency range is differ according to versions. *2Available depending on version
|Output power (at 13.8 V DC)||25 W, 1 W|
|Max. frequency deviation||±5.0 kHz|
|Frequency stability||Less than ±0.5 kHz|
|Spurious emissions||Less than 0.25 μW|
|Residual modulation||More than 40 dB|
|Adjacent channel power||More than 70 dB|
|Intermediate frequency||30.15 MHz, 450 kHz (1st/2nd)|
|CH70||21.70 MHz, 450 kHz (1st/2nd)|
|Sensitivity||–5 dBμ emf typ. (20 dB SINAD)|
|CH70 (1% BER)||–3 dBμ emf typ. (1% BER)|
|Adjacent channel selectivity||More than 75 dB|
|CH70 (1% BER)||More than 80 dBμ emf|
|Spurious response||More than 75 dB|
|CH70 (1% BER)||More than 73 dBμ emf|
|Intermodulation||More than 75 dB|
|CH70 (1% BER)||More than 73 dBμ emf|
|Hum and noise||More than 40 dB|
|Audio output power (at 10% distortion)||More than 15 W
with a 4 Ω external speaker
Measurements made in accordance with EN301 025-2, -3. All stated specifications are subject to change without notice or obligation..
Applicable U.S. Military Specifications
|Low Pressure||500.5||I, II|
|High Temperature||501.5||I, II|
|Low Temperature||502.5||I, II|
Also meets equivalent MIL-STD-810-C, -D, -E and -F.
Applicable IP Rating
|Ingress Protection Standard|
|Water||IPX8 (1 m depth water for 60 minutes)|
All stated specifications are subject to change without notice or obligation.
- Speaker microphone, HM-205RB
- GNSS antenna, UX-241
- Microphone hanger
- DC power cable
- Mounting bracket kit
FLUSH MOUNT KITS
Catalogs / Brochures
Ingress Protection (IP) Code
Ingress Protection (IP) ratings define the level of protection provided by enclosures to prevent the ingress of foreign objects (dust) and liquid into the electrical equipment.
International Standard IEC 60529 outlines an international classification system that describes the sealing characteristics of electrical equipment.
The classification system uses the “IP” code, or “Ingress Protection” code, to define the level of seal.
An IP number contains two numbers (i.e. IP67) in most instances which relate to the level of protection provided by an enclosure or housing.
Either number may be shown as “X” (i.e. IPX6 / IP7X) to indicate the “X” part is not tested.
Degrees of Solid Particle Protection – 1st Digit
|IP6x||No ingress of dust; complete protection against contact. (Dust tight)|
|IP5x||Protected from the amount of dust that would interfere with normal operation. (Dust protected)|
Degrees of Liquid Ingress Protection – 2nd Digit
|IPx8||Protected against continuous immersion in water.
Depth and duration specified by model.
|IPx7||Protected against temporary immersion in water for 1 m (3.3 ft) for 30 minutes|
|IPx6||Protected against water projected by powerful jets from any direction.
100 L per minute by a powerful jets (12.5 mm) for 3 minutes.
|IPx5||Protected against water projected by jets from any direction.
12.5 L per minute by a nozzle (6.3 mm) for 3 minutes.
|IPx4||Protected against water splashed against the equipment from any direction|