Completely New CPU/FPGA Platform
The IC-FR5300 series is the second generation IDAS™ Repeater, keeping system compatibility with the original IC-FR5000 series and continuing its unique package. It looks the same as the IC-FR5000, but a new CPU/FPGA platform is used. The IC-FR5300 series provides digital simulcast system capability and ±0.1 ppm high frequency stability with a 1 pps reference signal from the GNSS antenna.
System Scalability
The IC-FR5300 series can be easily upgraded by installing an optional UC-FR5300 Network/controller board and software provided with a CF card. Depending on the communication density and coverage, your radio system can grow from a single site to a simulcast system or multi-site trunking* system, to match your communication needs.
* Compatible IDAS radio terminals are required for multi-site trunking.
| System | Optional Network/Controller Board |
|---|---|
| Simulcast Conventional | UC-FR5300 #14 (Supplied with a CF-FR5300SC) and UX-241 GNSS antenna |
| Multi-site Conventional | UC-FR5300 #12 (Supplied with a CF-FR5000MC) |
| Single site Trunking | UC-FR5300 #11 |
| Multi-site Trunking | UC-FR5300 #13 (Supplied with a CF-FR5000MT) |
D-SUB 25-Pin Accessory Connector
The IC-FR5300 series has a programmable D-SUB 25-pin accessory connector for connecting an external remote control devices. Also, modulation/demodulation signals can be input/output from the D-SUB connector.
50W Output at 50% Duty Cycle or 25W 100% Duty Cycle Operation*
Employing a high performance power amplifier, the IC-FR5300 series provides a reliable 100% duty cycle operation at 25W output. When operated at the high power setting of 50W, the repeater operates with a 50% duty cycle.
* 25 W output power depending on the repeater version. Ambient temperature: 25°CAmbient temperature: 25°C
50W Output at 100% Duty Cycle or 100W 50% Duty Cycle Operation with Optional Power Amplifier*
When need higher power, the optional UR-PA5000/UR-PA6000 series power amplifier provides 100W output power with a 50% duty cycle and 50W output with 100% duty cycle.
* Ambient temperature: 25°C
Capable of Installing Two RF modules in One Chassis
The IC-FR5300 series has an internal space for installing another RF unit. Two RF modules* can be installed and operated independently. LEDs on the front panel shows the status of both channel.
* Optional UR-FR5300/UR-FR6300 required.
Digital/Analog Mixed Mode and Multiple Tone-Group Using CTCSS, DTCS Tone and RAN
The IC-FR5300 series can receive both analong and digital modes on a channel, and transmit either mode, depending on the programming. It decodes multiple CTCSS and DTCS as well as digital RAN (Radio Access Number) codes on a per channel basis (up to 16 tones/codes) and downlinks the received signal with a specified tone/code.
32 Channel Capacity and 5 Programmable Buttons
The 12-digit alphanumeric display, 5 programmable buttons, 32 memory channels and internal speaker enable you to use the repeater as a simple base station, or to check repeater activity. The LCD shows a variety of text and code information.
IP Remote Maintenance
When the IC-FR5300 series is connected to an IP network through the optional UC-FR5300 network/controller board, PC programming and IP address setting can be made from a remote location. The SNMP traps and Syslog can be sent to your manager for remote monitoring.
Other Features
- 19-inch rack mount 2U height low profile
- Receiver voting function improves talkback capability of radio terminals in the field
- RC-FS10 remote communicator software works as a simple dispatch station to communicate with radio terminals through the repeater
- CW ID transmitter
- PTT priority setting (Local Microphone, external PTT or repeater operation)
- 5-Tone decoder* (* For analog mode only)
- DTMF encoder/decoder
- Low voltage alert
Rear Panel View
General
IC-FR5300 |
IC-FR6300 |
|||
|---|---|---|---|---|
| Frequency coverage (Varies according to version) |
136-174 MHz (USA, EXP, EUR, CAN, AUS) |
400-470 MHz (USA, EXP, EUR, CAN) |
||
| Number of channels |
32 channels / 1 zone |
|||
| Channel spacing (Varies according to version) |
6.25/12.5/25 or 7.5/15/30 kHz |
|||
| Type of emission |
16K0F3E*1 (25 kHz), |
|||
| Power supply requirement |
13.6 V DC (USA, CAN, EXP) |
|||
| Current drain (at 13.6V DC) |
Tx High |
15.0 A maximum (at 50 W) |
||
| Rx | Stand-by |
500 mA (FAN OFF) |
||
| Max. audio |
1900 mA |
|||
| Dimensions (projections not included; W×H×D) |
IC-FR5300/IC-FR6300 |
483 × 88 × 260 mm, 19.0 × 3.5 × 10.2 in |
||
| UR-FR5300/UR-FR6300 |
176×60×194 mm, 6.9 × 2.4 × 7.6 in |
|||
| Weight (approx.) | IC-FR5300/IC-FR6300 |
5.78 kg, 12.7 lb |
||
| UR-FR5300/UR-FR6300 |
2.1 kg, 4.6 lb |
|||
| Operating temperature range |
-30℃ to +60℃, –22 °F to +140 °F (USA, CAN, EXP) |
|||
*1 25 kHz bandwidth is not available for FCC Part 90 licensees for USA versions. Ask your dealer if you need 25 kHz bandwidth.
Transmitter
IC-FR5300 |
IC-FR6300 |
|
|---|---|---|
| RF output power (Hi, L2, L1) (Varies according to version) |
50 W, 25 W, 5 W (USA, EXP, CAN, AUS Versions) |
|
| Spurious emissions |
80 dB typ. (TIA-603) |
|
| Frequency stability |
±1.0 ppm or less |
|
| Audio harmonic distortion |
0.9% typ. (AF 1kHz 40% deviation)(TIA-603) |
0.8% typ. (AF 1kHz 40% deviation)(TIA-603) |
| FM Hum and Noise |
83 dB typ. (W) |
72 dB typ. (W) |
Receiver
IC-FR5300 |
IC-FR6300 |
||
|---|---|---|---|
| Sensitivity | Digital (1% BER) |
–4.0 dBμV (0.32 μV) emf typ. (EN301 166) |
–3.5 dBμV (0.33 μV) emf typ. (EN301 166) |
| Analog (12 dB SINAD) |
–119 dBm (0.25 μV) typ. (TIA-603) |
–117 dBm (0.32 μV) typ. (TIA-603) |
|
| Analog (20 dB SINAD) |
–4.0/–4.0/–1.0 dBμV emf typ. (W/M/N)(EN300 086) |
–3.0/–3.0/0.0 dBμV emf typ. (W/M/N)(EN300 086) |
|
| Adjacent channel selectivity |
Digital |
66 dB typ. (EN301 166) |
63 dB typ. (EN301 166) |
| Analog |
85/80 dB typ. (W/N)(TIA-603) |
80/56 dB typ. (W/N)(TIA-603) |
|
| Spurious response rejection |
Digital |
87 dBμV emf typ. (EN301 166) |
85 dBμV emf typ. (EN301 166) |
| Analog |
85 dB typ.(TIA-603) |
84 dB typ.(TIA-603) |
|
| Intermodulation rejection |
Digital |
78 dBμV emf typ. (EN301 166) |
78 dBμV emf typ. (EN301 166) |
| Analog |
81/81 dB typ. (W/N)(TIA-603) |
80/80 dB typ. (W/N)(TIA-603) |
|
| AF output power |
3.9 W typ. (at 5% distortion with a 4Ω load) |
||
Measurements made in accordance with TIA-603, EN300 086 and EN301 166.
Applicable U.S. Military Specifications
Icom makes rugged products that have been tested to and passed the following MIL-STD requirements and strict environmental standards.
| Standard | MIL-810 G Method, Proc. |
|---|---|
| Low Pressure Storage |
500.5 I |
| Low Pressure Operation |
500.5 II |
| High Temperature Storage |
501.5 I |
| High Temperature Operation |
501.5 II |
| Low Temperature Storage |
502.5 I |
| Low Temperature Operation |
502.5 II |
| Temperature Shock |
503.5 I-C |
| Solar Radiation |
505.5 I |
| Humidity |
507.5 II |
| Dust Blowing |
510.5 I |
| Vibration |
514.6 I |
| Shock Functional |
516.6 I |
All stated specifications are subject to change without notice or obligation.
MICROPHONES
EXTERNAL SPEAKERS
SOFTWARE
CHANNEL MODULES
GPS ANTENNAS
INTERNAL UNITS
News
Catalogs / Brochures
| Brochures Name | Size |
|---|---|
| IDAS™ Digital Simulcast | 1.71MB |
| IC-FR5300/IC-FR6300 | 1.31MB |
Instruction Manual / Guides
| Name | Model Name | Note |
|---|---|---|
| INSTRUCTION MANUAL | IC-FR5300/IC-FR6300 | |
| DICHIARAZIONE DI CONFORMITA UE (ITALIANO) | IC-FR5300/UR-FR5300 | |
| DOC (DECLARATION OF CONFORMITY) | IC-FR5300/UR-FR5300 | |
| DICHIARAZIONE DI CONFORMITA UE (ITALIANO) | IC-FR6300/UR-FR6300 | |
| DOC (DECLARATION OF CONFORMITY) | IC-FR6300/UR-FR6300 |
CloseCloseIngress Protection (IP) Code
Ingress Protection (IP) ratings define the level of protection provided by enclosures to prevent the ingress of foreign objects (dust) and liquid into the electrical equipment.
International Standard IEC 60529 outlines an international classification system that describes the sealing characteristics of electrical equipment.
The classification system uses the “IP” code, or “Ingress Protection” code, to define the level of seal.
An IP number contains two numbers (i.e. IP67) in most instances which relate to the level of protection provided by an enclosure or housing.
Either number may be shown as “X” (i.e. IPX6 / IP7X) to indicate the “X” part is not tested.
Degrees of Solid Particle Protection – 1st Digit
| IP6x | No ingress of dust; complete protection against contact. (Dust tight) |
|---|---|
| IP5x | Protected from the amount of dust that would interfere with normal operation. (Dust protected) |
Degrees of Liquid Ingress Protection – 2nd Digit
| IPx8 | Protected against continuous immersion in water. Depth and duration specified by model. |
|---|---|
| IPx7 | Protected against temporary immersion in water for 1 m (3.3 ft) for 30 minutes |
| IPx6 | Protected against water projected by powerful jets from any direction. 100 L per minute by a powerful jets (12.5 mm) for 3 minutes. |
| IPx5 | Protected against water projected by jets from any direction. 12.5 L per minute by a nozzle (6.3 mm) for 3 minutes. |
| IPx4 | Protected against water splashed against the equipment from any direction |
