VHF AND UHF DIGITAL TRANSCEIVERS
Everything you'd expect in a business radio
... Plus Digital!
- VHF/IDAS DIGITAL IC-F5122D (25W)
- UHF/IDAS DIGITAL IC-F6122D (25W)
128 Channels with 8 Zones
An ample 128 channel capacity allow most companies plenty of room to grow.
Up to 8 zones lets you group together channels in logical fashion.
Built Military Rugged!
The tough aluminum die-cast chassis and polycarbonate front panel have been tested to MIL standard 810F specifications.
Compact Hand Microphone
Select from 4 levels of mic gain, for clearer transmission.
GPS Receiver Connection
An external GPS receiver, PC or other device can be connected with the optional OPC-2078 (D-sub 25-pin) or OPC-1939 (D-sub 15-pin). Operating channels can be selected from an external device. (up to 16 preprogrammed channels).
Note：No Digital Modulation "IN" using accessory cables.
An 8-character alphanumeric LCD with user-friendly icons shows a variety of information and operating status such as caller’s name, received message, etc.
Large Programmable Buttons
Programmable P0-P3 buttons provide easy access to frequently used functions.
Buttons and LCD display are backlit for night time opeartion.
Powerful, Front-Facing Speaker
4 watts (typ.) front facing speaker delivers clear and loud audio throughout a vehicle’s cabin. Digital modulation adds distinct clarity to received voices.
dPMR Mode1/2 Operation
The IC-F5122D series provides dPMR mode 1/2 conventional mode operation. It is also compatible with Mode 2 multi-site system. The following IDAS features are programmable.
- PTT ID
- Individual/Talkgroup list (Max. 500)
- SDM (Short Data Message)
- Stun/kill/revive (RX)
- Ambience listening (RX)
- Enhanced emergency
- Lone worker
- Transparent data call
- Digital voice scrambler
- GPS data (PC and software required to show received position data)
Transparent Data Modem Function
When IC-F5122D series is connected to a PC or other external equipment, the transparent data modem function allows communication in a 6.25kHz channel. It can be used for remote telemetry system control or data applications.
The voting scan detects the signal strength of the repeater sites and automatically selects the strongest station. The function is useful for roaming between multiple repeater sites.
(It is recommended to test the voting performance during installation.)
Built-in 2-Tone and 5-Tone (Analogue mode)
2-Tone and 5-Tone signalings give you selective calling, quiet stand-by and other convenient functions with programming. The stun/kill functions disable a radio over the air and the revive function restores the stunned radio.
Lone Worker Function
When the radio is not operated for a preset period, a warning beep will sound, alerting the radio user to check in. If the radio user does not check in before the preset time runs out, then the radio automatically sends out an emergency signal.
Optional Active Noise Canceling Microphone
The optional active noise canceling microphone HM-211 can automatically reduce noise in extremely noisy environments and assist in transmitting clear and accurate audio.
Watch the HM-211 performance video:
- CTCSS/DTCS encoder/decoder*
- BIIS PTT ID transmission*
- 8 DTMF autodial memories
- Microphone hanger action programmable
- Optional DTMF microphone (HM-152T/HM-148T)
- PC programmable
- Power-on password function
- Time out timer
- Talk around function
- Nuisance delete function*
- Forced narrow function*
* Analogue only
TX: Transmit, RX: Receive
|Number of channels||
128 channels (8 zones)
|Type of emission||
16K0F3E, 14K0F3E, 8K50F3E, 4K00F1E/F1D
(projections not included; W×H×D)
|RF output power (at 13.2V DC)||
25W, 10W, 2.5W (Hi, L2, L1)
|Audio harmonic distortion||
|Digital FSK error||5% max.|
|Sensitivity||(at 20dB SINAD)||
–4dBμV typ. (emf)
|(at 5% BER)||
–8dBμV typ. (emf)
|Adjacent channel selectivity||
80/80/70dB typ. (W/M/N),
75/75/70dB typ. (W/M/N),
|Spurious response rejection||
67dB typ. (W/M/N),
|AF output power
(at 5% distortion with an 4Ω load)
Applicable U.S. Military Specifications
Icom makes rugged products that have been tested to and passed the following MIL-STD requirements and strict environmental standards.
|Low Pressure Storage||
|Low Pressure Operation||
|High Temperature Storage||
|High Temperature Operation||
|Low Temperature Storage||
|Low Temperature Operation||
|Shock Transit Drop||
Also meets equivalent MIL STD 810 -C, -D and -E.
All stated specifications are subject to change without notice or obligation.
- Microphone, HM-152
- Microphone hanger and its cable
- Mounting bracket kit
- DC power cable
- Function name sticker
Catalogs / Brochures
Ingress Protection (IP) Code
Ingress Protection (IP) ratings define the level of protection provided by enclosures to prevent the ingress of foreign objects (dust) and liquid into the electrical equipment.
International Standard IEC 60529 outlines an international classification system that describes the sealing characteristics of electrical equipment.
The classification system uses the “IP” code, or “Ingress Protection” code, to define the level of seal.
An IP number contains two numbers (i.e. IP67) in most instances which relate to the level of protection provided by an enclosure or housing.
Either number may be shown as “X” (i.e. IPX6 / IP7X) to indicate the “X” part is not tested.
Degrees of Solid Particle Protection – 1st Digit
|IP6x||No ingress of dust; complete protection against contact. (Dust tight)|
|IP5x||Protected from the amount of dust that would interfere with normal operation. (Dust protected)|
Degrees of Liquid Ingress Protection – 2nd Digit
|IPx8||Protected against continuous immersion in water.
Depth and duration specified by model.
|IPx7||Protected against temporary immersion in water for 1 m (3.3 ft) for 30 minutes|
|IPx6||Protected against water projected by powerful jets from any direction.
100 L per minute by a powerful jets (12.5 mm) for 3 minutes.
|IPx5||Protected against water projected by jets from any direction.
12.5 L per minute by a nozzle (6.3 mm) for 3 minutes.
|IPx4||Protected against water splashed against the equipment from any direction|