128 Channels with 8 Zones
Ample 128 channel capacity allows most companies plenty of room to grow. Up to 8 zones lets you group together channels in logical fashion.
Built Military Rugged!
The tough aluminum die-cast chassis and polycarbonate front panel have been tested to the MIL standard 810 F.
Compact Hand Microphone
Select from 5 levels of mic gain, for clearer transmission.
GPS Receiver Connection
With optional D-SUB 25-pin ACC cable OPC-2078, an external GPS receiver or PC can be connected.
Note：No Digital Modulation "IN" using accessory cables.
An 8-character alphanumeric LCD with user-friendly icons shows a variety of information and operating status such as caller's name, received message, etc.
Large Programmable Buttons
For easy access to often used functions, P0-P3 buttons are programmable to meet specific needs. Buttons and LCD display are backlit for night time opeartion.
Powerful, Front-Facing Speaker
4 watts (typ.) front facing speaker delivers clear and loud audio throughout a vehicle's cabin. Digital modulation adds distinct clarity to received voices.
IDAS™ Digital Mode Operation
The IC-F5121D series provides NXDN™ CAI-based IDAS digital mode operation. It is also compatible with IDAS multi-site conventional and IDAS single-site trunking. The following IDAS features are programmable.
- PTT ID
- Individual/Talkgroup list (Max. 500)
- RAN (Radio Access Number)
- SDM (Short Data Message)
- Call alert
- Radio check (RX)
- Stun/kill/revive (RX)
- Remote monitor (RX)
- Emergency (No ACK)
- Digital voice scrambler
- GPS data (PC and software required to show received position data)
Built-in 2-Tone and 5-Tone (Analog mode)
2-Tone and 5-Tone signalings give you selective calling, quiet stand-by and other convenient functions with programming. The stun/kill functions disable a radio over the air and the revive function restores the stunned radio.
MDC 1200 Compatible (Analog mode)
The following MDC features are available with the built-in MDC signaling.
- PTT ID
- Radio check (RX)
- Emergency (No ACK)
- Stun/Revive (RX)
- 500 alias table (Max.)
The priority scan allows you to monitor one or two priority channels while scanning other non-priority channels. The TX channel and talk back functions allow you to make a quick response while scanning.
Lone Worker Function
When the radio is not operated for a preset period, a warning beep will sound, alerting the radio user to check in. If the radio user does not check in before the preset time runs out, then the radio automatically sends out an emergency signal.
Optional Active Noise Canceling Microphone
The optional active noise canceling microphone HM-211 can automatically reduce noise in extremely noisy environments and assist in transmitting clear and accurate audio.
Watch the HM-211 performance video:
- CTCSS/DTCS encoder/decoder*
- 8 DTMF autodial memories
- Microphone hanger action programmable
- Optional DTMF microphone (HM-152T)
- PC programmable
- Power-on password function
- Time out timer
- Talk around function
- Nuisance delete function*
- Forced narrow function*
* analog only
TX: Transmit, RX: Receive
|Number of channels||
128 channels (8 zones)
|Type of emission||
(projections not included; W×H×D)
* 25 kHz and 30 kHz bandwidth are no longer available for FCC Part 90 licensees for USA versions.
|RF output power (at 13.6V DC)||
50W, 25W, 5W
45W, 25W, 4.5W
|Audio harmonic distortion||
|FM Hum and Noise||
|Digital FSK error||5% max.|
0.25μV typ. (at 12dB SINAD)
|Adjacent channel selectivity||
80/70dB typ. (Wide/Narrow),
|Spurious response rejection||
|AF output power
(at 5% distortion with an 4Ω load)
Applicable U.S. Military Specifications
Icom makes rugged products that have been tested to and passed the following MIL-STD requirements and strict environmental standards.
|Low Pressure Storage||500.4||I|
|Low Pressure Operation||500.4||II|
|High Temperature Storage||501.4||I|
|High Temperature Operation||501.4||II|
|Low Temperature Storage||502.4||I|
|Low Temperature Operation||502.4||II|
|Shock Transit Drop||516.5||IV|
Also meets equivalent MIL-STD-810-C, -D -E and -F.
All stated specifications are subject to change without notice or obligation.
- Microphone, HM-152
- Microphone hanger and its cable
- Mounting bracket kit
- DC power cable
- Function name sticker
Catalogs / Brochures
|IC-F5120D/IC-F6120D Digital Series||603KB|
Instruction Manual / Guides
|Instruction Manual||IC-F5120D series, IC-F6120D series|
|Operating Guide||IC-F51210D/F6120D series (MDC / IDAS operation)|
Ingress Protection (IP) Code
Ingress Protection (IP) ratings define the level of protection provided by enclosures to prevent the ingress of foreign objects (dust) and liquid into the electrical equipment.
International Standard IEC 60529 outlines an international classification system that describes the sealing characteristics of electrical equipment.
The classification system uses the “IP” code, or “Ingress Protection” code, to define the level of seal.
An IP number contains two numbers (i.e. IP67) in most instances which relate to the level of protection provided by an enclosure or housing.
Either number may be shown as “X” (i.e. IPX6 / IP7X) to indicate the “X” part is not tested.
Degrees of Solid Particle Protection – 1st Digit
|IP6x||No ingress of dust; complete protection against contact. (Dust tight)|
|IP5x||Protected from the amount of dust that would interfere with normal operation. (Dust protected)|
Degrees of Liquid Ingress Protection – 2nd Digit
|IPx8||Protected against continuous immersion in water.
Depth and duration specified by model.
|IPx7||Protected against temporary immersion in water for 1 m (3.3 ft) for 30 minutes|
|IPx6||Protected against water projected by powerful jets from any direction.
100 L per minute by a powerful jets (12.5 mm) for 3 minutes.
|IPx5||Protected against water projected by jets from any direction.
12.5 L per minute by a nozzle (6.3 mm) for 3 minutes.
|IPx4||Protected against water splashed against the equipment from any direction|