Built-in Basic LTR™ Mode Operation
Group, selective and phone calls are available in built-in LTR™ mode. MDC signaling is also available with LTR™ mode.
IDAS, 6.25kHz Digital Mode Ready
The IDAS 6.25kHz digital mode is available with the UT-126H digital unit*.
* Already installed.
Built-in Versatile Tone Signaling
Use the built-in CTCSS, DTCS, 2-Tone 5-Tone or MDC 1200 capability to set up your own talk groups, and have your radio standby quietly when other groups are talking. Up to ten 2-Tone, eight 5-Tone codes can be decoded on a single memory channel.
IP54 Dust-Protection and Splash Resistance (Controller only)
When used with the optional separation kit, RMK-3, and separation cable, the front panel of the IC-F5061D series can be detached from the main unit. The control head has dust-protection and splash resistance construction equivalent to IP54.
Voting Scan (Analog mode only)
The Voting scan detects the signal strength level of repeater sites and automatically selects the strongest station, useful for roaming between 2 or more repeater sites. Once you program for voting mode in a memory zone, you can easily start voting mode operation by changing the zone setting.
Optional Active Noise Canceling Microphone
The optional active noise canceling microphone HM-211 can automatically reduce noise in extremely noisy environments and assist in transmitting clear and accurate audio.
Watch the HM-211 performance video:
Other Features
- The mode independent setting automatically selects the scanning list, according to the operating channel
- Nuisance delete
- Lone worker function
- Built-in inversion-type voice scrambler*
- Large dot matrix display and multi-function LCD
- 8 DTMF autodialing memories
- D-Sub accessory connector, ignition sensing line and more...
* Inversion type voice scrambler is not compatible with UT-109/UT-110 voice scrambler.
General
IC-F5061D | IC-F6061D | |||
---|---|---|---|---|
Frequency coverage (Varies according to version) |
136-174 MHz |
400–470 MHz |
||
Number of channels |
512 ch/128 zones |
|||
Channel spacing (Varies according to version) |
12.5/25*, 15/30* |
12.5/25* |
||
Type of emission |
16K0F3E*, |
16K0F3E*, |
||
Current drain | Tx High |
14A/7A (50/25W) |
14A/7A (45/25W) |
|
Rx | Stand-by |
300 mA |
||
Max. audio |
1.2A |
|||
Dimensions (projections not included; W×H×D) |
160×45×150 mm; |
|||
Weight (approx.) |
1.3kg; 2.9lb |
* 25 kHz and 30 kHz bandwidth are no longer available for FCC Part 90 licensees for USA versions.
Transmitter
IC-F5061D | IC-F6061D | |
---|---|---|
RF output power |
50W |
45W |
Spurious emissions |
75dB (typ.) |
|
Frequency stability |
±1.0ppm |
|
Audio harmonic distortion |
3% typical |
|
FM Hum and Noise |
45dB typ. (W) |
|
Digital FSK error | 5% max. |
Receiver
IC-F5061D | IC-F6061D | |
---|---|---|
Sensitivity |
0.25μV (typ. analog for 12 dB SINAD), |
|
Adjacent channel selectivity (W/N) |
85/75dB (typ.) |
|
Spurious response rejection |
90dB (typ.) |
|
Intermodulation rejection |
77dB (typ.) |
|
AF output power (at 5% distortion with an 8Ω load) |
4W (typ.) |
Function Comparison and Internal Unit Options
IC-F5061D | IC-F6061D | ||
---|---|---|---|
Number of option slots | 2* | ||
CTCSS/ DTCS | encoder | Available | |
decoder | Available | ||
2-Tone | encoder | Available | |
decoder | Available | ||
5-Tone | encoder | Available | |
decoder | Available | ||
DTMF autodial | Available | ||
DTMF decoder | Available** | ||
Voice Scrambler | Inversion | Available | |
APCO P25 digital | - | ||
AES encryption | - | ||
DES encryption | - | ||
IDAS digital | UT-126H*** | ||
MPT 1327 | - | ||
MDC 1200 | Available | ||
LTR™ trunking | Available | ||
PassPort | - |
Applicable U.S. Military Specifications
Icom makes rugged products that have been tested to and passed the following MIL-STD requirements and strict environmental standards.
Standard |
MIL-810 G | |
---|---|---|
Method | Procedure | |
Low Pressure Storage |
500.4 |
I |
Low Pressure Operation |
500.4 |
II |
High Temperature Storage |
501.4 |
I |
High Temperature Operation |
501.4 |
II |
Low Temperature Storage |
502.4 |
I |
Low Temperature Operation |
502.4 |
II |
Temperature Shock |
503.4 |
I |
Solar Radiation |
505.4 |
I |
Rain Blowing |
506.4 |
I* |
Rain Drip |
506.4 |
III* |
Humidity Induced |
507.4 |
- |
Salt Fog |
509.4 |
- |
Dust Blowing |
510.4 |
I |
Vibration |
514.5 |
I |
Shock Functional |
516.5 |
I |
Shock Transit Drop |
516.5 |
IV |
* Rain blowing and drip tests were performed on the controller and RMK-3 only.
Also meets equivalent MIL STD 810 -C, -D and -E.
All stated specifications are subject to change without notice or obligation.
Supplied Accessories
- Microphone*
- Microphone hanger
- Mounting bracket kit
- DC power cable
- Function name sticker
* HM-148G for IC-F5061D versions 55, 58
HM-148T for IC-F5061D version 65
HM-148G for IC-F6061D versions 61, 66
HM-152 for IC-F6061D versions 65, 68
MICROPHONES
EXTERNAL SPEAKERS
POWER SUPPLY CABLES
SEPARATION KITS
INTERNAL UNITS
EXTENSION CABLES
Catalogs / Brochures
Brochures Name | Size |
---|---|
IC-F5061D/IC-F6061D Digital Series | 805KB |
Professional Radios | 12.11MB |
IDAS™ Solutions | 2.43MB |
MDC1200 | 767KB |
Instruction Manual / Guides
Name | Model Name | Note |
---|---|---|
Instruction Manual | IC-F5060 series, IC-F6060 series | |
Operating guide | IC-F5060/F6060 series (BIIS / MDC / LTR / NXDN operation) |
Ingress Protection (IP) Code
Ingress Protection (IP) ratings define the level of protection provided by enclosures to prevent the ingress of foreign objects (dust) and liquid into the electrical equipment.
International Standard IEC 60529 outlines an international classification system that describes the sealing characteristics of electrical equipment.
The classification system uses the “IP” code, or “Ingress Protection” code, to define the level of seal.
An IP number contains two numbers (i.e. IP67) in most instances which relate to the level of protection provided by an enclosure or housing.
Either number may be shown as “X” (i.e. IPX6 / IP7X) to indicate the “X” part is not tested.
Degrees of Solid Particle Protection – 1st Digit
IP6x | No ingress of dust; complete protection against contact. (Dust tight) |
---|---|
IP5x | Protected from the amount of dust that would interfere with normal operation. (Dust protected) |
Degrees of Liquid Ingress Protection – 2nd Digit
IPx8 | Protected against continuous immersion in water. Depth and duration specified by model. |
---|---|
IPx7 | Protected against temporary immersion in water for 1 m (3.3 ft) for 30 minutes |
IPx6 | Protected against water projected by powerful jets from any direction. 100 L per minute by a powerful jets (12.5 mm) for 3 minutes. |
IPx5 | Protected against water projected by jets from any direction. 12.5 L per minute by a nozzle (6.3 mm) for 3 minutes. |
IPx4 | Protected against water splashed against the equipment from any direction |