Discontinued ProductNote: The contents of this page is as of the time it was created.
VHF AND UHF TRANSCEIVERS
IC-F3210D
IC-F4210D
Series
Extend Your Communication Reach with IDAS™ Multi-Site Trunking
- VHF/IDAS DIGITAL IC-F3210D
- UHF/IDAS DIGITAL IC-F4210D
IDAS™ Digital Mode Operation
The IC-F3210D series provides NXDN™ CAI-based IDAS digital mode operation. It is compatible with IDAS multi-site and single-site trunking and IDAS multi-site conventional.
Easy to Hear in Noisy Areas
The built-in bridge-tied load (BTL) amplifier delivers a powerful 800mW* audio output from the large 45mm speaker. In addition, the digital modulation provides distinct clarity even at the fringes of the communication range.
* Typical with internal speaker
Channel Announcement
When you rotate the channel knob, the radio announces the channel number. Convenient for making radio adjustments without having to look at the radio.
Longer Operating Time
The Li-Ion battery pack, BP-265 (7.4V, 2000mAh typ.), provides 17.5/16 hours* of operating time. Even when used with the BP-264, the radio offers 12/11 hours* of operating time.
* VHF/UHF, Tx:Rx:Standby=5:5:90. Power save function ON.
Weather Resistant, Military Rugged
While the radio is compact and light weight, the radio is tested to dust protection and water resistant equivalent to IP54 and 11 categories of MIL-STD-810 environmental tests. In short, the IC-F3210D series is built rugged!
Internal VOX Capability
The radio has the internal VOX capability for hands-free operation. Optional compatible headset with plug adapter cable OPC-2004LA can be used with the radio. Also, the VOX gain and VOX delay time are adjustable.
Roaming Scan
In the multi-site trunking mode, if the signal condition worsens as the radio user moves, the roaming scan automatically finds a new site to retain the communication link and quality.
IDAS™ Digital Mode Features
- PTT ID (TX)
- Individual/Group call
- Block decode
- RAN (Radio Access Number)
- Radio check (RX)
- Stun/kill/revive (RX)
- Call alert
- Remote monitor (RX)
- Emergency
- Digital voice scrambler
- GPS (TX with HM-171GP)
- ATB (All Trunks Busy) ring back
* TX: Transmit, RX: Receive
Other Features
- CTCSS/DTCS encoder/decoder*
- Low battery alert
- 2-step power save
- 3-color LED
- PC programmable
- Time out timer
- Talk around function
- Lone worker function
- Surveillance function
- Forced narrow function*
* Analog mode only
General
IC-F3210D | IC-F4210D | |||
---|---|---|---|---|
Frequency coverage |
136–174MHz |
400–470MHz |
||
Number of channels |
16 channels |
|||
Channel spacing |
25*/15/12.5/6.25kHz |
|||
Type of emission |
16K0F3E*/11K0F3E/8K50F3E/4K00F1E/F1D |
|||
Current drain (approx.) | Tx High |
1.3A |
1.3A |
|
Rx Max./Standby |
400mA/90mA |
400mA/100mA |
||
Dimensions (W×H×D) (Projections not included) |
58×111.5×36.5mm; 2.28×4.39×1.44in |
|||
Weight (approx.) |
320g; 11.3oz |
Transmitter
IC-F3210D | IC-F4210D | |
---|---|---|
Output power (at 7.5V DC) |
5W, 2W, 1W |
4W, 2W, 1W |
Spurious emissions |
75/71dB typ. (W/N) |
75dB typ. |
Frequency stability |
±1.0ppm |
|
Audio harmonic distortion (AF 1kHz 40% deviation, W/N) |
0.5/0.8% typ. |
|
FSK error |
2% typ. |
|
FM Hum and noise |
52/46dB typ. (W/N) |
50/44dB typ. (W/N) |
Receiver
IC-F3210D | IC-F4210D | ||
---|---|---|---|
Sensitivity |
(Analog 12dB SINAD) |
0.23μV typ. |
0.22μV typ. |
(Digital 5% BER) | 0.18μV typ. |
0.18μV typ. |
|
Adjacent channel selectivity |
77/71/58dB typ. (W/N/D) |
74/67/58dB typ. (W/N/D) |
|
Spurious response rejection |
91dB typ. |
80dB typ. |
|
Intermodulation rejection |
75/75/70dB typ. (W/N/D) |
||
Audio output power (at 5% distortion) |
800mW typ. (Internal SP, 12Ω load) |
* 25kHz bandwidth is no longer available for FCC Part 90 licensees for USA versions. Ask your dealer if you need 25kHz bandwidth.
Applicable U.S. Military Specifications & IP Rating
Icom makes rugged products that have been tested to and passed the following MIL-STD requirements and strict environmental standards.
Standard |
MIL-810 G | |
---|---|---|
Method | Procedure | |
Low Pressure Storage |
500.5 |
I |
Low Pressure Operation |
500.5 |
II |
High Temperature Storage |
501.5 |
I |
High Temperature Operation |
501.5 |
II |
Low Temperature Storage |
502.5 |
I |
Low Temperature Operation |
502.5 |
II |
Temperature Shock |
503.5 |
I-C |
Solar Radiation |
505.5 |
I |
Rain Blowing |
506.5 |
I |
Rain Drip |
506.5 |
III |
Humidity Induced |
507.5 |
II |
Salt Fog |
509.5 |
- |
Dust Blowing |
510.5 |
I |
Vibration |
514.6 |
I |
Shock Functional |
516.6 |
I |
Shock Transit Drop |
516.6 |
IV |
Also meets equivalent MIL-STD-810 -C, -D, -E and -F.
Ingress Protection Standards | |
---|---|
Dust & Water |
IP54 (Dust-protection and water resistant) |
Measurements made in accordance with EIA/TIA-603.
All stated specifications are subject to change without notice or obligation.
Supplied Accessories
- Battery pack, BP-265
- Belt clip, MB-124
- Antenna
- Desktop charger, BC-193*
- AC adapter, BC-123SA/SE*
* May differ or not supplied according to version
MICROPHONES
HEADSETS
PTT/VOX CABLES
BATTERIES
CHARGERS
POWER SUPPLY CABLES
MOUNTING BRACKETS
ANTENNAS
Catalogs / Brochures
Brochures Name | Size |
---|---|
IC-F3210D/IC-F4210D Digital Series | 292KB |
Professional Radios | 12.11MB |
IDAS™ Solutions | 2.43MB |
Instruction Manual / Guides
Name | Model Name | Note |
---|---|---|
Operating Guide for IDAS NXDN operation | IC-F3210D / F4210D / F3230D / F4230D / F5220D / F6220D series | |
INSTRUCTIONS | IC-F3210D/IC-F4210D |
Ingress Protection (IP) Code
Ingress Protection (IP) ratings define the level of protection provided by enclosures to prevent the ingress of foreign objects (dust) and liquid into the electrical equipment.
International Standard IEC 60529 outlines an international classification system that describes the sealing characteristics of electrical equipment.
The classification system uses the “IP” code, or “Ingress Protection” code, to define the level of seal.
An IP number contains two numbers (i.e. IP67) in most instances which relate to the level of protection provided by an enclosure or housing.
Either number may be shown as “X” (i.e. IPX6 / IP7X) to indicate the “X” part is not tested.
Degrees of Solid Particle Protection – 1st Digit
IP6x | No ingress of dust; complete protection against contact. (Dust tight) |
---|---|
IP5x | Protected from the amount of dust that would interfere with normal operation. (Dust protected) |
Degrees of Liquid Ingress Protection – 2nd Digit
IPx8 | Protected against continuous immersion in water. Depth and duration specified by model. |
---|---|
IPx7 | Protected against temporary immersion in water for 1 m (3.3 ft) for 30 minutes |
IPx6 | Protected against water projected by powerful jets from any direction. 100 L per minute by a powerful jets (12.5 mm) for 3 minutes. |
IPx5 | Protected against water projected by jets from any direction. 12.5 L per minute by a nozzle (6.3 mm) for 3 minutes. |
IPx4 | Protected against water splashed against the equipment from any direction |