512 Memory Channels with 128 Zones
The 512 memory channel capacity with 128 zones allows you to divide and store a variety of channel groupings for versatile and efficient fleet management.
IDAS Digital Mode Ready
IDAS (Icom Digital Advanced System) is Icom’s digital land mobile system using the 6.25kHz narrowband FDMA technology. IDAS has choice of an NXDN™ protocol or an ETSI dPMR™ protocol.
Dot Matrix, Multi-Function LCD
The IC-F3162 series has a large dot matrix display to show information with high resolution characters. The display setting is programmable to show one line and 12 characters, or two lines and 24 characters. The bottom row shows assigned functions to the [P0] to [P3] buttons.
Voting Operation (Analogue Mode Only)
The voting mode scanning detects the signal strength level of repeater stations and automatically selects the strongest station, useful for roaming between 2 or more repeater sites. Once you program the voting mode to a memory zone, you can easily start voting mode operation by changing the zone setting.
Loud Audio Output with BTL Amplifier
The IC-F3162 series employs a BTL amplifier that increases the audio output and the built-in audio compander provides clear, low noise communications.
- Built-in LTR™ trunking and MDC 1200 capability* (* Depending on version)
- Built-in inversion type voice scrambler
Inversion type voice scrambler is not compatible with UT-109R/UT-110R voice scrambler.
- The mode independent setting automatically selects the scanning list, according to the operating channel
- Nuisance delete
- IP55 dust-protection and water jet resistance
- Optional man down unit, UT-124R and lone worker function
(Varies according to version)
|Number of channels||
512 ch/128 zones
(Varies according to version)
|Type of emission||
|Current drain||Tx High||1.5A||1.8A|
(projections not included; W×H×D)
340g (with BP-232N)
|RF output power||
|Audio harmonic distortion||
|FSK error||5% (Max.)|
|Sensitivity||at 20dB SINAD||-4dBμV (typ.)|
|at 5% BER||-8dBμV (typ.)|
|Adjacent channel selectivity (W/M/N)||
|Spurious response rejection||
|AF output power
(at 5% distortion with an 8Ω load)
Function Comparison and Internal Unit Options
|Number of option slots||1||1|
|IDAS dPMR||Tier 2 Mode1/2||Available||-|
|Tier 2 Mode 3||Available||-|
|Multi-site type D
|Man Down function||UT-124R||UT-124R|
Applicable U.S. Military Specifications
Icom makes rugged products that have been tested to and passed the following MIL-STD requirements and strict environmental standards.
|Low Pressure Storage||
|Low Pressure Operation||
|High Temperature Storage||
|High Temperature Operation||
|Low Temperature Storage||
|Low Temperature Operation||
|Shock Transit Drop||
Also meets equivalent MIL-STD-810 -C, -D and -E.
|Ingress Protection Standards|
|Dust & Water||
IP55 (Dust-protection and water jet resistance)
All stated specifications are subject to change without notice or obligation.
- Battery pack, BP-232H
- Antenna, FA-SC55V
- Belt clip, MB-94
Please note that a Battery charger must be purchased separatelly.
Catalogs / Brochures
Instruction Manual / Guides
|Operating guide for BIIS/MDC/LTR||IC-F3160/F4160 Series|
|INSTRUCTIONS||IC-F3162D series, IC-F4162D series (dPMR)|
|PRECAUTIONS||IC-F3162D/IC-F3262D, IC-F4162D/IC-F4262D series (dPMR)|
|DICHIARAZIONE DI CONFORMITA UE(ITALIANO)||IC-F3162T/IC-F3162DT/IC-F3162DS|
|DOC (DECLARATION OF CONFORMITY)||IC-F3162T/IC-F3162S/IC-F3162DT/IC-F3162DS|
|Instruction Manual||IC-F3162T/S, IC-F3162DT/DS, IC-F4162T/S, ICF4162DT/DS|
|DOC (DECLARATION OF CONFORMITY)||IC-F4162T/IC-F4162S/IC-F4162DT/IC-F4162DS|
|DICHIARAZIONE DI CONFORMITA UE(ITALIANO)||IC-F4162T/IC-F4162S/IC-F4162DT/IC-F4162DS|
Ingress Protection (IP) Code
Ingress Protection (IP) ratings define the level of protection provided by enclosures to prevent the ingress of foreign objects (dust) and liquid into the electrical equipment.
International Standard IEC 60529 outlines an international classification system that describes the sealing characteristics of electrical equipment.
The classification system uses the “IP” code, or “Ingress Protection” code, to define the level of seal.
An IP number contains two numbers (i.e. IP67) in most instances which relate to the level of protection provided by an enclosure or housing.
Either number may be shown as “X” (i.e. IPX6 / IP7X) to indicate the “X” part is not tested.
Degrees of Solid Particle Protection – 1st Digit
|IP6x||No ingress of dust; complete protection against contact. (Dust tight)|
|IP5x||Protected from the amount of dust that would interfere with normal operation. (Dust protected)|
Degrees of Liquid Ingress Protection – 2nd Digit
|IPx8||Protected against continuous immersion in water.
Depth and duration specified by model.
|IPx7||Protected against temporary immersion in water for 1 m (3.3 ft) for 30 minutes|
|IPx6||Protected against water projected by powerful jets from any direction.
100 L per minute by a powerful jets (12.5 mm) for 3 minutes.
|IPx5||Protected against water projected by jets from any direction.
12.5 L per minute by a nozzle (6.3 mm) for 3 minutes.
|IPx4||Protected against water splashed against the equipment from any direction|