Outstanding audio quality, high performance and strong commercial build quality make the IC-F27SR the ideal licence free radio. Ideal for users in diverse areas such as construction, catering, event management, shopping centres, factories, farms as well as serious outdoor enthusiasts.
Up to 55 Hours of Operating Time
The IC-F27SR features highly efficient circuitry, providing up to a massive 55 hours of operating time* with the supplied BP-299 3150 mAh lithium-ion battery pack. This means it can be comfortably last an entire shift.
* Tx: Rx: Stand-by =5: 5: 90 with power save ON.
Outstanding audio quality
800 mW audio output is provided from the large 45 mm speaker meaning the IC-F27SR can deliver loud and intelligible audio even in extremely noisy environments such as a busy shop floor or construction site.
Just Three Main Controls
Transmit button, volume control and channel selector. This simple to use radio is ideal for high turnover environments and shift work where the radio is constantly passed from person to person.
Lightweight, Compact Body
Small size (58 × 186 × 36.5 mm) and lightweight (290 g) makes this transceiver ideal for all users.
Commercial Grade Construction
The IC-F27SR is extremely rugged. It has been tested to 11 categories of environmental military standards for dust protection and water resistance making it ideally suited for outdoor use.
Internal VOX for Hands-free Operation
Built-in VOX function provides convenient hands-free operation, when used with our optional headset adapter cable.
500 mW Output Power
Provides a wide communication coverage.
Other features
- CTCSS and DTCS encoder and decoder for group call
- Surveillance function turns off the LED and beep sound
- Siren function can be used for security alarm
- Power save function
- Low battery Alert
- Time out timer
- Monitor function
Frequency coverage | 446.00625–446.09375 MHz | ||
---|---|---|---|
Number of channels | 8 PMR 446 allocated channels | ||
Channel spacing | 12.5 kHz (8K50F3E) | ||
Current drain | Tx | 400 mA | |
Rx | Max. audio | 330 mA (Internal SP) | |
Operating temperature range | –25°C to +55°C (Radio only) | ||
Frequency stability | ±2.5 ppm | ||
RF output power | 500 mW (ERP) | ||
Ext. microphone connector | 3-conductor 2.5 (d) mm/2.2 kΩ | ||
Sensitivity (at 20dB SINAD) | 26.5 dBμV/m | ||
Audio output power (at 5% distortion) |
Internal speaker | 800 mW typ. (With 12 Ω load) | |
External speaker | 400 mW typ. (With 8 Ω load) | ||
Ext. speaker connector | 2-conductor 3.5 (d) mm/8 Ω | ||
Dimensions (projections not included; W×H×D) |
58×186×36.5 mm (with antenna and BP-299) | ||
Weight (approx.) | 290g with BP-299 |
Measurements made in accordance with EN 300-296.
All stated specifications are subject to change without notice or obligation.
Applicable U.S. Military Specifications
Icom makes rugged products that have been tested to and passed the following MIL-STD requirements and strict environmental standards.
Standard |
|
|
---|---|---|
|
|
|
Low Pressure |
500.4 |
I, II |
High Temperature |
501.4 |
I, II |
Low Temperature |
502.4 |
I, II |
Temperature Shock |
503.4 |
I |
Solar Radiation |
505.4 |
I |
Rain Blowing/Drip |
506.4 |
I, III |
Humidity |
507.4 |
- |
Salt Fog |
509.4 |
- |
Dust Blowing | 510.4 | I |
Vibratin | 514.5 | I |
Shock | 516.5 | I, IV |
Also meets equivalent MIL-STD-810-C, -D and -E.
Ingress Protection Standards | |
---|---|
Dust & Water |
IP54 (Dust-protection and water resistant) |
Supplied Accessories
- Li-ion battery pack, BP-299
- Belt clip, MB-124
- Battery charger, BC-240
- AC adapter, BC-242
* AC adapter is not supplied or may differ depending on version.
MICROPHONES
EARPHONES
HEADSETS
PTT/VOX CABLES
CHARGERS
AC ADAPTERS
POWER SUPPLY CABLES
BELT CLIPS
Catalogs / Brochures
Brochures Name | Size |
---|---|
IC-F27SR | 1.48MB |
Instruction Manual / Guides
Name | Model Name | Note |
---|---|---|
INSTRUCTION MANUAL | IC-F27SR | |
DOC (DECLARATION OF CONFORMITY) | IC-F27SR | |
DICHIARAZIONE DI CONFORMITA UE(ITALIANO) | IC-F27SR |
Ingress Protection (IP) Code
Ingress Protection (IP) ratings define the level of protection provided by enclosures to prevent the ingress of foreign objects (dust) and liquid into the electrical equipment.
International Standard IEC 60529 outlines an international classification system that describes the sealing characteristics of electrical equipment.
The classification system uses the “IP” code, or “Ingress Protection” code, to define the level of seal.
An IP number contains two numbers (i.e. IP67) in most instances which relate to the level of protection provided by an enclosure or housing.
Either number may be shown as “X” (i.e. IPX6 / IP7X) to indicate the “X” part is not tested.
Degrees of Solid Particle Protection – 1st Digit
IP6x | No ingress of dust; complete protection against contact. (Dust tight) |
---|---|
IP5x | Protected from the amount of dust that would interfere with normal operation. (Dust protected) |
Degrees of Liquid Ingress Protection – 2nd Digit
IPx8 | Protected against continuous immersion in water. Depth and duration specified by model. |
---|---|
IPx7 | Protected against temporary immersion in water for 1 m (3.3 ft) for 30 minutes |
IPx6 | Protected against water projected by powerful jets from any direction. 100 L per minute by a powerful jets (12.5 mm) for 3 minutes. |
IPx5 | Protected against water projected by jets from any direction. 12.5 L per minute by a nozzle (6.3 mm) for 3 minutes. |
IPx4 | Protected against water splashed against the equipment from any direction |