6 Watts High RF Output Power
For expanded communication coverage, output power has been increased to approximately 6 W typical (PEP)/ 1.8 W typical (carrier) compared to the IC-A24E (5/1.5 W PEP/carrier).
Often used functions are assigned to the keypad and you can directly access a desired function. The enlarged flat sheet keypad offers smooth and swift operation.
2.3 inch Large High Visibility LCD
The 2.3 inch large, high contrast and high visible LCD displays user-friendly, graphic screens and ensures good readability under direct sunlight. The operating frequency in large characters can be recognized at a glance. In addition, the night mode option enables easy viewing in low light conditions.
"Flip-Flop" Channel Recall
The IC-A25NE/CE stores the last 10 channels used. You can easily recall those channels by using the directional keys, the channel knoband the 10 keypad. This is convenient for switching between several channels, such as NAV and COM channels. In addition, you can freely edit (replace, delete, change order) the stored recall channels.
Built-in Bluetooth® for Hands-Free Operation (for IC-A25NE)
A third-party wireless Bluetooth® headset, like a 3M™ Peltor™ WS™ 5*, provides convenient hands-free operation. Also, by using the optional VS-3 Bluetooth® headset, the side tone function can be used.
* Compatibility not guaranteed.
Intelligent Battery with Detailed Battery Status
The supplied BP-288, 2350 mAh typical intelligent battery pack, provides up to 10.5 hours* of operating time. You can check the condition of the battery pack in the battery status screen. It is very useful for optimum charging and battery health maintenance.
* Typical operation with Tx: Rx (Max.audio): standby=5:5:90. (Bluetooth OFF, GPS ON)
VOR Navigation Functions (for IC-A25NE)
The CDI (Course Deviation Indicator) is detailed like a real VOR instrument, and displays any deviation from your course.
The OBS (Omni Bearing Selector) enables you to change course from the original flight plan.
The TO-FROM indicator shows the position relationship between your aircraft and the course selected by the OBS.
The ABSS (Automatic Bearing Set System) function enables you to set the current course as a new course in two simple steps.
Near Station Search Function (for IC-A25NE)
The near station search function assists you in accessing nearby ground stations. The function searches for nearby stations using the station memories that have GPS position information. To use the near station search function, position data and frequencies of the ground stations must be programmed.
Built-in GPS Receiver with Simplified Waypoint NAV (for IC-A25NE)
The simplified waypoint NAV guides you to a destination by using current position information from GPS (also GLONASS and SBAS). The waypoint NAV has two functions: Direct-To NAV and Flight Plan NAV. Up to 10 flight plans and 300 waypoints can be memorized in the IC-A25NE.
Flight Plans with Android™ /iOS™ App (for IC-A25NE)
Using the RS-AERO1A (Android) or RS-AERO1I (iOS) application, you can make flight plans on an Android/iOS device and import the plan into the IC-A25NE via Bluetooth. The following four functions are available: Create a flight plan, set Direct-To NAV, display flight plan information and display waypoint information.
* Additional certification may be required for some countries. Enquire with your local authority for details.
- IP57 dust-protection and waterproof construction
- Operate with six AA size alkaline batteries with the BP-289 battery case
- BNC antenna
- 121.5 MHz emergency key
- Weather channels
- Priority watch
- VFO scan, memory channel scan, priority scan
- ANL (Auto Noise Limiter) for noise reduction
- Side tone function
- Internal VOX capability
- 300 memory channels (in 15 memory groups) with 12 character names
- 8.33 kHz channel spacing
|NAV and COM||NAV and COM channels||COM channels|
|Frequency range||TX||118.000–136.992 MHz|
|RX||108.000–136.992 MHz||118.000–136.992 MHz|
|Number of memory channels||300 channels/15 groups|
|Channel spacing||25/8.33 kHz|
|Type of emission||6K80A3E, 5K00A3E|
|Power supply requirement||7.2 V DC (BP-288), 11.0 V DC (External DC Jack)|
|Current drain (approximately)||Tx High||Less than 1.8 A|
|RX Max. audio/Stand-by||Less than 500 mA
90 mA typ. (GPS, Bluetooth, Light: OFF)
|Antenna impedance||50 Ω|
|Operating temperature range||−20 °C to +55 °C|
|Dimensions (W × H × D;)
(Projections not included)
|58.9 × 148.4 × 31.8 mm|
|Weight (approximately)||340 g (with BP-288)|
|Output power (at 7.2 V DC)||6.0/1.8 W (PEP/carrier)|
|Audio harmonic distortion||Less than 10% (at 85% modulation)|
|Harmonics Spurious emissions||Less than −36 dBm
(except operationg frequency ±1 MHz)
|Frequency stability||±1 ppm|
|Intermediate frequencies||46.35 MHz/450 kHz (1st/2nd)|
|Sensitivity||NAV (6 dB S/N)||Less than 0 dBμ|
|COM (12 dB SINAD)||Less than 0 dBμ (with CCITT filter)|
|Squelch sensitivity (at threshold)||Less than 0 dBμ|
|Adjacent channel rejection||More than 60 dB|
|Spurious response||More than 70 dB|
|Hum and noise||More than 40 dB (at 90% modulation)|
|Audio output power||External speaker||530 mW typical (AM 8 Ω/60% Mod at 10% distortion)|
|Internal speaker||1200 mW typical (AM 8 Ω/60% Mod at 10% distortion)|
|Ext. speaker connector||3-conductor 3.5 (d) mm (1⁄8ʺ)/8 Ω|
Measurements made in accordance with EN300 676-2.
All stated specifications are subject to change without notice or obligation.
Applicable U.S. Military Specifications
|Low Pressure||500.5||I, II|
|High Temperature||501.5||I, II|
|Low Temperature||502.5||I, II|
|Rain Blowing/Drip||506.5||I, III|
Also meets equivalent MIL-STD-810 -C, -D, -E and -F.
Applicable IP Rating
|Ingress Protection Standard|
|Water||IP57 (Dust-protection and Waterproof* protection)
* One meter depth for 30 minutes.
POWER SUPPLY CABLES
Instruction Manual / Guides
|DOC (DECLARATION OF CONFORMITY)||IC-A25CE|
|DICHIARAZIONE DI CONFORMITA UE(ITALIANO)||IC-A25CE|
|DOC (DECLARATION OF CONFORMITY)||IC-A25NE|
|DICHIARAZIONE DI CONFORMITA UE(ITALIANO)||IC-A25NE|
|Basic Manual (English/German/Spanish/French/Italian)||IC-A25NE/IC-A25CE|
Ingress Protection (IP) Code
Ingress Protection (IP) ratings define the level of protection provided by enclosures to prevent the ingress of foreign objects (dust) and liquid into the electrical equipment.
International Standard IEC 60529 outlines an international classification system that describes the sealing characteristics of electrical equipment.
The classification system uses the “IP” code, or “Ingress Protection” code, to define the level of seal.
An IP number contains two numbers (i.e. IP67) in most instances which relate to the level of protection provided by an enclosure or housing.
Either number may be shown as “X” (i.e. IPX6 / IP7X) to indicate the “X” part is not tested.
Degrees of Solid Particle Protection – 1st Digit
|IP6x||No ingress of dust; complete protection against contact. (Dust tight)|
|IP5x||Protected from the amount of dust that would interfere with normal operation. (Dust protected)|
Degrees of Liquid Ingress Protection – 2nd Digit
|IPx8||Protected against continuous immersion in water.
Depth and duration specified by model.
|IPx7||Protected against temporary immersion in water for 1 m (3.3 ft) for 30 minutes|
|IPx6||Protected against water projected by powerful jets from any direction.
100 L per minute by a powerful jets (12.5 mm) for 3 minutes.
|IPx5||Protected against water projected by jets from any direction.
12.5 L per minute by a nozzle (6.3 mm) for 3 minutes.
|IPx4||Protected against water splashed against the equipment from any direction|