Practical Dual Bander
The Black Edition of Our Long-selling IC-2730E, FM Mobile Transceiver, Now Available with Black Inverted LCD. With the addition of the Black Edition of IC-2730E, users can choose between the existing classic White LCD and the new Black LCD, tailored to suit personal style, vehicle interior and operating conditions. Enjoy comfortable mobile operation with excellent operability and multiple functions including VHF/VHF, UHF/UHF simultaneous reception, 50 W of output on VHF and UHF etc.
VHF/VHF, UHF/UHF Simultaneous Receive
The IC-2730E provides VHF/VHF, UHF/UHF simultaneous receive capability as well as VHF/UHF receive. Main dials, volume, squelch knobs and primal buttons are symmetrically laid out for each band.
High-contrast Large Black Inverted LCD
The display size of the IC-2730E is 91 mm × 27 mm view area. The frequency and channel name are displayed larger, and the black inverted LCD provides higher contrast.
Easy Controller Mounting with the Optional MBF-1
The combination of the optional MBF-1 suction cup mounting base and MBA-5 controller bracket provides easy tilt and swivel adjustments. The large suction cup can be mounted on flat surfaces and can be removed easily.
50W of output on VHF and UHF
The IC-2730E employs a durable PA module and delivers 50 watts of high power operation on both VHF and UHF bands.
Built-in 50 CTCSS and 104 DTCS tones with Split Tone Function
The CTCSS and DTCS tones are built-in for quiet stand-by and repeater access. The split tone function allows you to set CTCSS/DTCS tones separately for repeater uplink and downlink on a per channel basis.
Controller Attachment to the Main Unit with Optional MBA-4
With the optional MBA-4 combination bracket, the controller can be attached to the main unit. The microphone jacks are mounted on both the controller and main unit.
Wideband Receiver
The IC-2730E covers 118–174 and 375–550MHz*. You will be able to listen to aviation, marine, weather channels and other utility communications.
* Receiver range differs depending on version.
Optional Active Noise Canceling Microphone
The optional active noise canceling microphone HM-209 can automatically reduce noise in extremely noisy environments and assist in transmitting clear and accurate audio.
Watch the HM-209 performance video:
Other Features
- HM-207 remote control microphone
- Hands free operation with HM-249 for vehicle
- CS-2730 Free download PC programming software
- Versatile scanning capability
- Squelch delay and squelch attenuator
- Sub band auto mute function
- Sub band busy beep function
- Auto power off
- Time-out-timer
- 16 DTMF auto dial memories
- CI-V remote control capability (through the OPC-478UC)
General
| Frequency coverage | EUR Version | Transmit: 144–146, 430–440MHz Receive: 118–174, 375–550MHz* |
| No. of memory channels | 1052 channels (including 50 scan edges and 2 Call) |
|
| Type of emission | F2D, F3E (FM, FM-N) | |
| Frequency stability | ±2.5ppm | |
| Power supply requirement | 13.8V DC ±15% | |
| Current drain (approximate) |
Tx | 13A |
| Rx | 1.8A/1.2A (Max. audio/Stand-by) |
|
| Antenna impedance | 50Ω (SO-239) | |
| Operating temperature range | −10°C to +60°C | |
| Dimensions (W×H×D Projections are not included) |
Main unit | 150×40×151 mm |
| Controller | 150×50×27.2 mm | |
| Weight (approx.) | Main unit | 1.2 kg |
| Controller | 140 g | |
* Guaranteed range is same as transmit range.
Transmitter
| Output power (at 13.8V DC) | 50W, 15W, 5W |
| Max. frequency deviation | ±5.0kHz/±2.5kHz (W/N) |
| Spurious emissions | Less than −60dBc |
| Microphone impedance | 600Ω (8-pin modular) |
Receiver
| Intermediate frequencies | B band | 46.35MHz/450kHz |
| Sensitivity (at 12dB SINAD) | Less than 0.18μV | |
| Selectivity | More than 60dB/55dB (W/N) | |
| Spurious response rejection | A band | More than 60dB/55dB (V/U) |
| B band | More than 60dB/60dB (V/U) | |
| Audio output power | More than 2W (10% dist. 8Ω) | |
| External speaker connector | 2 conductor 3.5 (d) mm (1/8″)/8Ω | |
| Receiver sensitivity (Not guaranteed, for your reference only) |
FM/FM-N (12dB SINAD)* |
137–159.995MHz: Less than 0.32μV 160–174.000MHz: Less than 0.56μV 375–399.995MHz: Less than 0.56μV 400–499.995MHz: Less than 0.32μV 500–550.000MHz: Less than 0.56μV |
| AM/AM-N (10dB S/N) |
118–136.991MHz: Less than 1μV | |
* Except amateur bands. Less than
Applicable U.S. Military Specifications
Icom makes rugged products that have been tested to and passed the following MIL-STD requirements and strict environmental standards.
| Standard | MIL 810G | |
| Method | Procedure | |
| High Temperature | 501.5 | I, II |
| Low Temperature | 502.5 | I, II |
| Vibration | 514.6 | I |
| Shock | 516.6 | I, IV |
Also meets equivalent MIL-STD-810-C, -D -E and -F.
All stated specifications are subject to change without notice or obligation.
Supplied Accessories
- Hand microphone, HM-207
- Controller cable
- Microphone hanger
- DC power cable
- Spare fuse
MICROPHONES
EXTERNAL SPEAKERS
MOUNTING BRACKETS
SOFTWARE
PROGRAMMING/DATA CABLES
EXTENSION CABLES
ADAPTER CABLES
Catalogs / Brochures
| Brochures Name | Size |
|---|---|
| IC-2730E_Blackedition | 1.52MB |
Instruction Manual / Guides
| Name | Model Name | Note |
|---|---|---|
| Instruction manual | IC-2730A/IC-2730E | |
| EXMENU items and CI-V information | IC-2730A/IC-2730E | |
| DOC (DECLARATION OF CONFORMITY) | IC-2730E | |
| DICHIARAZIONE DI CONFORMITA UE(ITALIANO) | IC-2730E |
CloseCloseIngress Protection (IP) Code
Ingress Protection (IP) ratings define the level of protection provided by enclosures to prevent the ingress of foreign objects (dust) and liquid into the electrical equipment.
International Standard IEC 60529 outlines an international classification system that describes the sealing characteristics of electrical equipment.
The classification system uses the “IP” code, or “Ingress Protection” code, to define the level of seal.
An IP number contains two numbers (i.e. IP67) in most instances which relate to the level of protection provided by an enclosure or housing.
Either number may be shown as “X” (i.e. IPX6 / IP7X) to indicate the “X” part is not tested.
Degrees of Solid Particle Protection – 1st Digit
| IP6x | No ingress of dust; complete protection against contact. (Dust tight) |
|---|---|
| IP5x | Protected from the amount of dust that would interfere with normal operation. (Dust protected) |
Degrees of Liquid Ingress Protection – 2nd Digit
| IPx8 | Protected against continuous immersion in water. Depth and duration specified by model. |
|---|---|
| IPx7 | Protected against temporary immersion in water for 1 m (3.3 ft) for 30 minutes |
| IPx6 | Protected against water projected by powerful jets from any direction. 100 L per minute by a powerful jets (12.5 mm) for 3 minutes. |
| IPx5 | Protected against water projected by jets from any direction. 12.5 L per minute by a nozzle (6.3 mm) for 3 minutes. |
| IPx4 | Protected against water splashed against the equipment from any direction |
