Flexible Size Options to Suit Different Uses
You can choose brand logo stickers from three sizes: large, medium, and small. They cater to a variety of needs, from small items to larger ones. The small size is perfect for smartphones and electronic devices, the medium size is ideal for tablets, and the large size works well for laptops and PCs, covering a wide range of daily items.
Choose from Two Color Options
You can choose brand logo stickers in either black or white to suit the area/items you may attach them to.
Application Instructions
1. Clean off any dirt of the surface before applying the sticker.
2. Temporarily fix it in place while adjusting the position with masking tape, etc.
3. Slowly peel off the backing paper so that the sticker remains on the top layer sheet side.
4. Attach the top layer sheet without wrinkles, pressing firmly from the top to remove any air bubbles under the sticker.
5. Finally, remove the top layer to complete the process.
| Small | Medium | Large | |
|---|---|---|---|
| Logo size (W x H) | 40 × 19.1 mm, 1.6 × 0.8 inch | 70 × 33.5 mm, 2.8 × 1.3 inch |
125 × 59.8 mm, 4.9 × 2.4 inch |
| Backing paper size (W x H) | 50 × 29 mm, 2.0 × 1.1 inch | 80 × 44 mm, 3.1 × 1.7 inch |
135 × 65 mm, 5.3 × 2.6 inch |
| OPP bag size (W x H) | 54 × 40 mm, 2.1 × 1.6 inch | 84 × 55 mm, 3.3 × 2.2 inch |
139 × 76 mm, 5.5 × 3.0 inch |
| Country of Origin | China | ||
| Color |
Black / White |
||
Catalogs / Brochures
| Brochures Name | Size |
|---|---|
| Brand Logo Sticker | 260KB |
CloseCloseIngress Protection (IP) Code
Ingress Protection (IP) ratings define the level of protection provided by enclosures to prevent the ingress of foreign objects (dust) and liquid into the electrical equipment.
International Standard IEC 60529 outlines an international classification system that describes the sealing characteristics of electrical equipment.
The classification system uses the “IP” code, or “Ingress Protection” code, to define the level of seal.
An IP number contains two numbers (i.e. IP67) in most instances which relate to the level of protection provided by an enclosure or housing.
Either number may be shown as “X” (i.e. IPX6 / IP7X) to indicate the “X” part is not tested.
Degrees of Solid Particle Protection – 1st Digit
| IP6x | No ingress of dust; complete protection against contact. (Dust tight) |
|---|---|
| IP5x | Protected from the amount of dust that would interfere with normal operation. (Dust protected) |
Degrees of Liquid Ingress Protection – 2nd Digit
| IPx8 | Protected against continuous immersion in water. Depth and duration specified by model. |
|---|---|
| IPx7 | Protected against temporary immersion in water for 1 m (3.3 ft) for 30 minutes |
| IPx6 | Protected against water projected by powerful jets from any direction. 100 L per minute by a powerful jets (12.5 mm) for 3 minutes. |
| IPx5 | Protected against water projected by jets from any direction. 12.5 L per minute by a nozzle (6.3 mm) for 3 minutes. |
| IPx4 | Protected against water splashed against the equipment from any direction |
