IEEE 802.11ac (Wave 2) Standard, High-Speed Communication
The AP-95M complies with the IEEE802.11ac (Wave 2) standard providing high-speed and stable data communication at a maximum of 867 Mbps (theoretical value).
Beam Forming Function, MU-MIMO Function
The Beam Forming function can send a signal to a specific direction, and the MU-MIMO function*1 prevents mutual interference. These functions can improve the communication quality.
*1 2×2 MIMO
Virtual AP Function
Up to eight wireless LAN terminal groups can be configured, which can have different VLAN IDs in each 5 GHz and 2.4 GHz band*2.Each virtual AP can have different security settings.
*2 Different SSIDs must be set in the same unit.
Automatic Settings Enables Easy Management
The Automatic Power Level Adjustment function and Connecting Terminal Limit function can remove interference, and they can prevent reduction in communication speed caused by access concentration. The AP-95M can automatically set the channel according to the surrounding signal conditions.
Easy PC Configuration
By using your PC's web browser, you can update to new firmware, and configure the access point. The AP-95M is compatible with SNMP and the RS-AP3 access point management tool so that you can easily manage your terminals.Other Features
- Protection function
- Authentication function (IEEE802.1X/WPA/WPA2)
- PoE function
- Stealth function (Hide SSID function)
- Gigabit Ethernet (1000BASE-T)
- Router function
- Web Authentication function
- Network Monitoring function
- Packet Filter function
- Security Slot*3 and more
*3 Attach a security wire (user supplied).
|Power supply||PoE (IEEE 802.3af standard: Max. 9 W)
12 V ±10% DC, More than 2 A*1
|Usable conditions||−10°C to ＋55°C; +14°F to +131°F
(Below 0°C; 32°F: Usable when the power is ON)
Humidity 5 to 95% (At no condensation)
|Dimensions (W)×(D)×(H）(Approximately)||162×162×42 mm; 6.4×6.4×1.7 in
（Projections not included）
|520 g; 1.1 lb (Accessories not included)|
*1 With an AC adapter. An AC adapter may not be supplied, depending on the version.
|Security standards||WEP (64/128/152 bit),
WPA, WPA2, WPA-PSK, WPA2-PSK,
|Number ofchannels*2||20 MHz bandwidth 2.4 GHz:
13 channels, 5 GHz: 9 channels
40 MHz bandwidth 2.4 GHz:
9 channels, 5 GHz: 4 channels
80 MHz bandwidth 5 GHz:
*2 Usable channels depend on the country.
|Cable LAN||10BASE-T/100BASE-TX/1000BASE-T compatible
RJ-45 type connector
(MDI/MDI-X automatic distinction) × 1
|Wireless LAN||IEEE 802.11 ac/n/a/g/b standard|
|Data rates||Cable LAN : 10/100/1000 Mbps
Wireless LAN : 11/54/400*3/867 Mbps
*3 When connecting with a terminal compatible with 256-QAM.
All stated specifications are subject to change without notice or obligation.
- AC adapter*
- Mounting bracket set
* May not be supplied, depending on the version.
Instruction Manual / Guides
Firmware / Software
Ingress Protection (IP) Code
Ingress Protection (IP) ratings define the level of protection provided by enclosures to prevent the ingress of foreign objects (dust) and liquid into the electrical equipment.
International Standard IEC 60529 outlines an international classification system that describes the sealing characteristics of electrical equipment.
The classification system uses the “IP” code, or “Ingress Protection” code, to define the level of seal.
An IP number contains two numbers (i.e. IP67) in most instances which relate to the level of protection provided by an enclosure or housing.
Either number may be shown as “X” (i.e. IPX6 / IP7X) to indicate the “X” part is not tested.
Degrees of Solid Particle Protection – 1st Digit
|IP6x||No ingress of dust; complete protection against contact. (Dust tight)|
|IP5x||Protected from the amount of dust that would interfere with normal operation. (Dust protected)|
Degrees of Liquid Ingress Protection – 2nd Digit
|IPx8||Protected against continuous immersion in water.
Depth and duration specified by model.
|IPx7||Protected against temporary immersion in water for 1 m (3.3 ft) for 30 minutes|
|IPx6||Protected against water projected by powerful jets from any direction.
100 L per minute by a powerful jets (12.5 mm) for 3 minutes.
|IPx5||Protected against water projected by jets from any direction.
12.5 L per minute by a nozzle (6.3 mm) for 3 minutes.
|IPx4||Protected against water splashed against the equipment from any direction|