Ultra Compact Body, Flexible Installation
The IC-M330/G has a palm-sized compact body (W×H×D; 156.5 × 66.5 × 88.2 mm; 6.2 × 2.6 × 3.5 in). The radio can be installed in limited space.
New Speaker Delivers Dynamic, Clear Audio
A new speaker design delivers dynamic and clear sound over a wide bass and treble range. The IC-M330/G provides a distortion-free clear audio even at full volume.
Built-in Class D DSC
The radio monitors CH 70 continuously, even while you are receiving another channel. DSC functions include: distress, individual, group, all ships, urgency, safety, position request/report, polling request and DSC test calls.
Class Leading Receiver Performance
The radio provides reliable communication in RF busy environment like a marina. (Selectivity and IMD: more than 70 dB)
Intuitive Operation with Icom Marine User Interface
A combination of the directional keypad and soft keys provides simple, smooth operation. Most used functions are assigned to soft keys for quick one push function access.
GPS Receiver Built-in (IC-M330G)
A built-in GPS receiver provides your location, bearing and speed by using information from GPS, GLONASS and SBAS. The acquired position information can be used for DSC calls.
Made in Japan Quality and Reliability
All Icom products are tested to pass rigorous in-house tests as well as environmental tests at the Wakayama Icom plant before shipping. Our world-leading products and quality is tradition.
- IPX7 submersible (1 m depth of water for 30 minutes)
- AquaQuake™ prevents audio degradation from a water-logged speaker
- Common NMEA interface for external GPS/NAV connection
- MA-500TR Class B AIS transponder compatible
- Tag scan and favorite channel functions
- Dual/tri-watch function for monitoring CH16 and/or call channel
- Priority scan function
- Display and keypad backlighting
- External speaker connection
- Weather channel with weather alert
- Supplied hand microphone, HM-235B/W, with channel up/down keys and a CH16/Call channel key
- 3-digit or 4-digit channel display selectable
|Frequency range||TX||156.025–161.600 MHz|
|Usable channels||USA, CAN, INT, WX channels|
|Type of emission||16K0G3E (FM), 16K0G2B (DSC)|
|Power supply requirement||13.8V DC nominal
(11.7-15.9 V DC)
(at 13.8 V DC)
|TX 25 W output||5 A|
|RX AF max.||1 A|
|Operating temperature range||-20°C to +60°C; -4°F to +140°F|
|Antenna impedance||50 Ω (SO-239)|
(projections not included)
|156.5 × 66.5 × 88.2 mm;
6.2 × 2.6 × 3.5 in
|Weight (approx.)||730 g; 1.6 lb|
|NMEA formats||In||RMC, GGA, GNS, GLL, VTG|
|Out||DSC, DSE, RMC, GSA, GSV|
|Output power (at 13.8 V DC)||25 W, 1 W|
|Max. frequency deviation||±5 kHz|
|Frequency tolerance||±5 ppm|
|Spurious emissions||Less than -70 dBc (High)
Less than -56 dBc (Low)
|Sensitivity||Main||-13 dBμ typ. (12 dB SINAD)|
|DSC||-5 dBμ emf typ. (1% BER)|
|Squelch sensitivity||Less than -10 dBμ|
|Adjacent channel selectivity||Main||More than 70 dB|
|DSC||More than 73 dBμ emf (1% BER)|
|Spurious response||Main||More than 70 dB|
|DSC||More than 73 dBμ emf (1% BER)|
|Intermodulation||Main||More than 70 dB|
|DSC||More than 68 dBμ emf (1% BER)|
|Hum and noise||More than 40 dB|
|Audio output power
(at 10% distortion, 4 Ω load)
|More than 2 W (Internal SP)
More than 4.5 W (External SP)
Measurements made in accordance with TIA/EIA 603. All stated specifications are subject to change without notice or obligation.
Applicable IP Rating
|Ingress Protection Standard|
|Water||IPX7 (Waterproof protection)|
- HM-235B/W hand microphone
- DC power cable
- Mounting bracket kit
- GPS antenna (5 m; 16.4 ft cable)*
* Only for the IC-M330G.
FLUSH MOUNT KITS
Catalogs / Brochures
Instruction Manual / Guides
|Instruction Manual (English)||IC-M330/IC-M330E/IC-M330G/IC-M330GE|
|Basic Manual (Spanish)||IC-M330/IC-M330G|
Ingress Protection (IP) Code
Ingress Protection (IP) ratings define the level of protection provided by enclosures to prevent the ingress of foreign objects (dust) and liquid into the electrical equipment.
International Standard IEC 60529 outlines an international classification system that describes the sealing characteristics of electrical equipment.
The classification system uses the “IP” code, or “Ingress Protection” code, to define the level of seal.
An IP number contains two numbers (i.e. IP67) in most instances which relate to the level of protection provided by an enclosure or housing.
Either number may be shown as “X” (i.e. IPX6 / IP7X) to indicate the “X” part is not tested.
Degrees of Solid Particle Protection – 1st Digit
|IP6x||No ingress of dust; complete protection against contact. (Dust tight)|
|IP5x||Protected from the amount of dust that would interfere with normal operation. (Dust protected)|
Degrees of Liquid Ingress Protection – 2nd Digit
|IPx8||Protected against continuous immersion in water.
Depth and duration specified by model.
|IPx7||Protected against temporary immersion in water for 1 m (3.3 ft) for 30 minutes|
|IPx6||Protected against water projected by powerful jets from any direction.
100 L per minute by a powerful jets (12.5 mm) for 3 minutes.
|IPx5||Protected against water projected by jets from any direction.
12.5 L per minute by a nozzle (6.3 mm) for 3 minutes.
|IPx4||Protected against water splashed against the equipment from any direction|