Tough and Waterproof
The IC-M87 is built tough to withstand hazardous environments. Even if it is dropped into water, the waterproof construction* will protect it from harm. (1m depth for 30 minutes)
* Equivalent to IPX7.
Simple Operation
6 clearly labelled buttons on the front panel and the volume/power knob maximize simplicity of operation. A large, clear LCD with backlighting and backlit buttons make night time operation easy.
Li-Ion Battery for Long Battery Life
With the standard battery pack, you can get up to 15 hours of operating time* without worrying about 'memory effect' of the battery.
*Tx:Rx:Stand-by= 5:5:90 with BP-274
22 Programmable Channels for PMR
The IC-M87 has 22 programmable channels reserved for PMR use (146–174MHz). Wide/narrow channel spacing is programmable for each channel, and CTCSS and DTCS signaling is built-in.
*Appropriate license will be required.
Other Features
- Instant access to Ch. 16 and call channel
- Simple add/delete TAG scanning
- Monitor button opens squelch
- 2 step power saver
- Key lock function
- Low battery indicator
- Optional waterproof microphone, HM-168
Frequency range | Tx | 156.000–161.450 MHz |
---|---|---|
Rx | 156.000–163.425 MHz | |
PMR; Tx/Rx | 146–174 MHz | |
Dimensions (W×H×D) (Projections not included) |
62×97×37.8 mm | |
Weight (approx.) | 274 g (With BP-274) | |
Current drain (approx.) | Transmit (High) | 1.6 A typ. |
Max. audio | 200 mA typ. | |
Sensitivity (at 20 dB SINAD; emf) | –2 dBμ typ. (Marine) –4 dBμ typ. (PMR) |
|
Intermodulation rejection | 68 dB (Marine) 65 dB (PMR) |
|
Audio output power (With an 8 Ω load) | 200 mW (Marine) 350 mW (PMR) |
|
RF output power | 5/3/1 W (Marine/PMR) 1/0.5 W (Marine, German version) |
|
Waterproof protection | IPX7 (1 m depth/30 min) | |
Waterproof speaker-microphone | HM-138 or HM-168 | |
VOX headset | - | |
Operating time (approx.)* | 15 hrs with BP-274 | |
Tag scan | Available | |
Favorite channel | - | |
AquaQuake draining function | - | |
CTCSS/DTCS with PMR channel | Available | |
Voice scrambler | - | |
Intrinsically safe | - |
* Typical operation, Tx:Rx:Stand-by=5:5:90
Applicable U.S. Military Specifications
Icom makes rugged products that have been tested to and passed the following MIL-STD requirements and strict environmental standards.
Standard | MIL-810 F Method, Proc. |
---|---|
Low Pressure Storage | 500.4 I |
Low Pressure Operation | 500.4 II |
High Temperature Storage | 501.4 I |
High Temperature Operation | 501.4 II |
Low Temperature Storage | 502.4 I |
Low Temperature Operation | 502.4 II |
Temperature Shock | 503.4 I |
Solar Radiation | 505.4 I |
Rain Blowing | 506.4 I |
Rain Drip | 506.4 III |
Humidity | 507.4 |
Salt Fog | 509.4 |
Dust Blowing | 510.4 I |
Vibration | 514.5 I |
Shock Functional | 516.5 I |
Shock Transit Drop | 516.5 IV |
Also meets equicalent MIL-STD-810-C, -D and -E.
All stated specifications are subject to change without notice or obligation.
Supplied Accessories
- Battery pack
- Battery charger
- AC adapter*
- Swivel belt clip
- Antenna, FA-S59V
- Hand strap
* Varies according to version.
CHARGERS
POWER SUPPLY CABLES
BELT CLIPS
BELT HANGERS
ANTENNAS
Catalogs / Brochures
Brochures Name | Size |
---|---|
IC-M87 | 372KB |
Instruction Manual / Guides
Name | Model Name | Note |
---|---|---|
Instruction Manual | IC-M87 | |
DOC (DECLARATION OF CONFORMITY) | IC-M87 | |
DICHIARAZIONE DI CONFORMITA UE(ITALIANO) | IC-M87 | |
Instruction Manual | IC-M87 (ATEX) |
Ingress Protection (IP) Code
Ingress Protection (IP) ratings define the level of protection provided by enclosures to prevent the ingress of foreign objects (dust) and liquid into the electrical equipment.
International Standard IEC 60529 outlines an international classification system that describes the sealing characteristics of electrical equipment.
The classification system uses the “IP” code, or “Ingress Protection” code, to define the level of seal.
An IP number contains two numbers (i.e. IP67) in most instances which relate to the level of protection provided by an enclosure or housing.
Either number may be shown as “X” (i.e. IPX6 / IP7X) to indicate the “X” part is not tested.
Degrees of Solid Particle Protection – 1st Digit
IP6x | No ingress of dust; complete protection against contact. (Dust tight) |
---|---|
IP5x | Protected from the amount of dust that would interfere with normal operation. (Dust protected) |
Degrees of Liquid Ingress Protection – 2nd Digit
IPx8 | Protected against continuous immersion in water. Depth and duration specified by model. |
---|---|
IPx7 | Protected against temporary immersion in water for 1 m (3.3 ft) for 30 minutes |
IPx6 | Protected against water projected by powerful jets from any direction. 100 L per minute by a powerful jets (12.5 mm) for 3 minutes. |
IPx5 | Protected against water projected by jets from any direction. 12.5 L per minute by a nozzle (6.3 mm) for 3 minutes. |
IPx4 | Protected against water splashed against the equipment from any direction |