Last Call Voice Recording
The last call voice recording function automatically saves the last incoming call for 1 minute. You can also start recording manually. You will not miss an important call.
Active Noise Cancelling Technology
The built-in bidirectional active noise cancelling reduces background noise to up to 90% and improves both your transmitted voice and incoming call. You will hear better and clearer!
Bass Boost Function
The signal processing technology emphasizes low-pitched sound to provide a rich bass sound for both transmit and receive signals.
700 mW Loud Audio
The IC-M73EURO uses a BTL (bridgetied load) amplifier that doubles the audio output. Its internal speaker delivers a loud 700mW audio output with clear sound.
6 W RF Output Power
The IC-M73EURO's 6 Watts*1 of transmit power will provide extended communication range for the user. A large capacity Lithium-Ion battery, BP-245H allows for 17 hours of operation, under normal conditions*2.
*1 1W for FRG version, 5 W for AUS version.
*2 Typical operation with 5:5:90 duty ratio. 20 hours for basic version.
IPX8 Advanced Waterproofing
The IC-M73EURO continues to offer Icom's best waterproof protection. The radio has been tested to survive after being submersed in 1.5 m (4.9 ft) depth of water for 30 minutes.
Slim, Hourglass Body Wide Viewing Angle LCD
The IC-M73EURO has a stylish, ergonomic design. A durable and rugged body provides for user-friendly operation and long life. A wide viewing angle, high intensity LCD offers bright, easy to read characters.
Additional features
・ AquaQuake™ water draining function
・ Dual/Tri-Watch function* for monitoring Channel 16 and/or call channel
・ 4 level battery indicator
・ Favorite channel and tag scan functions
・ Optional waterproof speaker-microphones, HM-167 and HM-202
・ Rapid charger BC-210 supplied
・ Auto power save function
・ Basic version (no voice recorder, no noise canceller and no bass boost function) available for limited markets.
・ Supports 4-digit channels
* Not available in the HOL version.
IC-M73EURO | IC-M73EURO AUS version |
||
---|---|---|---|
Frequency range | Tx | 156.000–161.450 MHz | 156.025–157.425 MHz |
Rx | 156.000–163.425 MHz | 156.300–162.025 MHz | |
Dimensions (W×H×D) (Projections not included) |
52.5×125×30 mm | ||
Weight (approx.) | 320 g (With BP-245H, FA-S64V, MB-103) |
||
Current drain | Tx | 1.5 A (6 W output) |
1.4 A (5 W output) |
Rx Max. audio (Int SP/Ext SP) |
450 mA/250 mA | ||
Sensitivity (at 20 dB SINAD) | −4 dBμ emf typ. | −5 dBμ emf typ. | |
Intermodulation | 68 dB typ. | 65 dB | |
Audio output power (at 10% distortion, 8 Ω load) |
700 mW typ. (Internal SP@ 1 kHz) 200 mW typ. (External SP) |
||
Output power (Hi/Mid/Low) | 6/3/1 W 1/0.5 W (FRG version) |
5/3/1 W |
Applicable U.S. Military Specifications
Icom makes rugged products that have been tested to and passed the following MIL-STD requirements and strict environmental standards.
Standard | MIL-810 G Method, Proc. |
---|---|
Low Pressure Storage | 500.5 I |
Low Pressure Operation | 500.5 II |
High Temperature Storage | 501.5 I |
High Temperature Operation | 501.5 II |
Low Temperature Storage | 502.5 I |
Low Temperature Operation | 502.5 II |
Temperature Shock | 503.5 I-C |
Solar Radiation | 505.5 I |
Rain Blowing | 506.5 I |
Rain Drip | 506.5 III |
Humidity | 507.5 II |
Salt Fog | 509.5 |
Dust Blowing | 510.5 I |
Water Immersion | 512.5 I |
Vibration | 514.6 I |
Shock Functional | 516.6 I |
Shock Transit Drop | 516.6 IV |
Also meets equicalent MIL-STD-810-C, -D, -E and -F.
Applicable IP Rating
Ingress Protection Standard | |
---|---|
Water | IPX8 (Waterproof protection) |
All stated specifications are subject to change without notice or obligation.
Supplied Accessories
- Cigarette lighter cable, CP-25H*
- AC adapter, BC-123SE or BC-242*
- Rapid charger, BC-210
- Battery pack, BP-245H
- Belt clip, MB-103
- Antenna, FA-S59V or FA-S64V*
- Hand strap
* Not supplied or may differ depending on version.
MICROPHONES
BATTERIES
CHARGERS
AC ADAPTERS
POWER SUPPLY CABLES
BELT CLIPS
BELT HANGERS
Catalogs / Brochures
Brochures Name | Size |
---|---|
IC-M73EURO | 438KB |
Marine Products (European Edition) | 9.80MB |
Instruction Manual / Guides
Name | Model Name | Note |
---|---|---|
Instruction Manual | IC-M73/IC-M73EURO | |
DOC (DECLARATION OF CONFORMITY) | IC-M73EURO | |
DICHIARAZIONE DI CONFORMITA UE (ITALIANO) | IC-M73EURO |



Ingress Protection (IP) Code
Ingress Protection (IP) ratings define the level of protection provided by enclosures to prevent the ingress of foreign objects (dust) and liquid into the electrical equipment.
International Standard IEC 60529 outlines an international classification system that describes the sealing characteristics of electrical equipment.
The classification system uses the “IP” code, or “Ingress Protection” code, to define the level of seal.
An IP number contains two numbers (i.e. IP67) in most instances which relate to the level of protection provided by an enclosure or housing.
Either number may be shown as “X” (i.e. IPX6 / IP7X) to indicate the “X” part is not tested.


Degrees of Solid Particle Protection – 1st Digit
IP6x | No ingress of dust; complete protection against contact. (Dust tight) |
---|---|
IP5x | Protected from the amount of dust that would interfere with normal operation. (Dust protected) |
Degrees of Liquid Ingress Protection – 2nd Digit
IPx8 | Protected against continuous immersion in water. Depth and duration specified by model. |
---|---|
IPx7 | Protected against temporary immersion in water for 1 m (3.3 ft) for 30 minutes |
IPx6 | Protected against water projected by powerful jets from any direction. 100 L per minute by a powerful jets (12.5 mm) for 3 minutes. |
IPx5 | Protected against water projected by jets from any direction. 12.5 L per minute by a nozzle (6.3 mm) for 3 minutes. |
IPx4 | Protected against water splashed against the equipment from any direction |
