Discontinued ProductNote: The contents of this page is as of the time it was created.
ACCESS POINT MANAGEMENT SOFTWARE
RS-AP3
Important Notices
Descriptions
・GUI for intuitive operation
・Management and control of individual and common settings of access points
・Unauthorized access detection
Specifications
| Operating system | Windows Server 2012 Windows Server 2012 R2 Windows Server 2016 Windows Server 2019 Windows 8.1 Windows 10 Windows 11 * The RS-AP3 cannot be used with Windows RT 8.1. * The RS-AP3 can be used with both 32 and 64 bit versions of the operating systems listed above. * GUI environment only. |
|---|---|
| Hardware requirements | CPU：Dual core 2GHz or higher System memory: 2GB or more Hard disk：2GB or more free space * We recommend that you use a Solid State Drive (SSD) rather than a Hard Disk Drive (HDD) for saving the logs. |
| Note | ・Wireless LAN access points that can be managed with this product are limited to those specified by our company. |
Wi-Fi Radios
Instruction Manual / Guides
| Name | Model Name | Note |
|---|---|---|
| INSTALLATION MANUAL | RS-AP3 | |
| INSTRUCTION MANUAL(Ver. 2.93) | RS-AP3 |
Firmware / Software
| Type | Model Name | Version | Last Update |
|---|---|---|---|
| Software update | RS-AP3 | Version 3.05 | 2024.12.26 |
CloseIngress Protection (IP) Code
Ingress Protection (IP) ratings define the level of protection provided by enclosures to prevent the ingress of foreign objects (dust) and liquid into the electrical equipment.
International Standard IEC 60529 outlines an international classification system that describes the sealing characteristics of electrical equipment.
The classification system uses the “IP” code, or “Ingress Protection” code, to define the level of seal.
An IP number contains two numbers (i.e. IP67) in most instances which relate to the level of protection provided by an enclosure or housing.
Either number may be shown as “X” (i.e. IPX6 / IP7X) to indicate the “X” part is not tested.
Degrees of Solid Particle Protection – 1st Digit
| IP6x | No ingress of dust; complete protection against contact. (Dust tight) |
|---|---|
| IP5x | Protected from the amount of dust that would interfere with normal operation. (Dust protected) |
Degrees of Liquid Ingress Protection – 2nd Digit
| IPx8 | Protected against continuous immersion in water. Depth and duration specified by model. |
|---|---|
| IPx7 | Protected against temporary immersion in water for 1 m (3.3 ft) for 30 minutes |
| IPx6 | Protected against water projected by powerful jets from any direction. 100 L per minute by a powerful jets (12.5 mm) for 3 minutes. |
| IPx5 | Protected against water projected by jets from any direction. 12.5 L per minute by a nozzle (6.3 mm) for 3 minutes. |
| IPx4 | Protected against water splashed against the equipment from any direction |
