REMOTE COMMUNICATOR
RC-FS10
Descriptions
Virtual Radio/Dispatch Software for Type-D Multi-Site Trunking, NXDN™ Conventional, dPMR™ Mode 2
The RC-FS10 Remote Communicator creates an IP-based virtual radio on a Windows®-based PC, and works as a simple dispatch station to communicate with radio terminals. The RC-FS10 can be used with Type-D multi-site trunking, NXDN conventional and dPMR mode 2 radio systems.
Specifications
| Operating system | Windows 🄬 10, 8.1, 7 (32-bit / 64-bit) |
|---|---|
| CPU | Intel🄬 Pentium🄬 4 1.6GHz CPU or better |
| Memory | 2GB or heigher (for Windows🄬 8.1) |
| Hard disk space | 100MB of disk space |
| Audio |
DirectSound compatible audio (Frequency response up to 20 kHz, sampling rate 48 kHz) |
| Display resolution | 1024 x 768 pixcel or more |
| Others |
CD-ROM drive, USB 2.0 port, 10Mbps or faster Ethernet interface, Speaker, microphone or headset |
RoIP & Network
REMOTE COMMUNICATOR
-
- RC-FS10
- REMOTE COMMUNICATOR
-
- CT-24
- DIGITAL VOICE CONVERTER
-
- HM-152
- HAND MICROPHONE
-
- SM-26
- DESKTOP MICROPHONE
CT-24 is supplied to the RC-FS10
Instruction Manual / Guides
| Name | Model Name | Note |
|---|---|---|
| Remote Communicator | RC-FS10 | |
| Multi-Trunking Compatible version | RC-FS10 | |
| Multi-Trunking & dPMR Mode2 Compatible version | RC-FS10 | |
| Multi-Trunking & dPMR Mode 2 & RoIP gateway compatible version | RC-FS10 #36 |
CloseIngress Protection (IP) Code
Ingress Protection (IP) ratings define the level of protection provided by enclosures to prevent the ingress of foreign objects (dust) and liquid into the electrical equipment.
International Standard IEC 60529 outlines an international classification system that describes the sealing characteristics of electrical equipment.
The classification system uses the “IP” code, or “Ingress Protection” code, to define the level of seal.
An IP number contains two numbers (i.e. IP67) in most instances which relate to the level of protection provided by an enclosure or housing.
Either number may be shown as “X” (i.e. IPX6 / IP7X) to indicate the “X” part is not tested.
Degrees of Solid Particle Protection – 1st Digit
| IP6x | No ingress of dust; complete protection against contact. (Dust tight) |
|---|---|
| IP5x | Protected from the amount of dust that would interfere with normal operation. (Dust protected) |
Degrees of Liquid Ingress Protection – 2nd Digit
| IPx8 | Protected against continuous immersion in water. Depth and duration specified by model. |
|---|---|
| IPx7 | Protected against temporary immersion in water for 1 m (3.3 ft) for 30 minutes |
| IPx6 | Protected against water projected by powerful jets from any direction. 100 L per minute by a powerful jets (12.5 mm) for 3 minutes. |
| IPx5 | Protected against water projected by jets from any direction. 12.5 L per minute by a nozzle (6.3 mm) for 3 minutes. |
| IPx4 | Protected against water splashed against the equipment from any direction |
