USB Driver Download

Download the old version

    • Options
    • PROGRAMMING/DATA CABLES
    • PROGRAMMING/DATA CABLES
Download Type USB Driver
Model name OPC-478UC
Version Version 1.0F
Update 2014/07/14
Major changes

Improvement:
Fixed a cloning error that may occur due to a communication error.

There are two different OPC-478UCs:
Previous: No marks on the label.
Current: Has a "B" marked on the label.
Version 1.0F is the USB driver for the previous "unmarked" OPC-478UC.

NOTE:

  • The unmarked OPC-478UC is usable with:
    Microsoft® Windows Vista® (32 and 64 bit)
    Microsoft® Windows® 7 (32 and 64 bit)

    The unmarked cable is NOT usable with:
    Microsoft® Windows® 8 (32 and 64 bit)
    Microsoft® Windows® 8.1 (32 and 64 bit)
  • Version 1.5 is the USB driver for the "B" marked OPC-478UC. Download the 1.5 driver here.
  • Read the installation guide in the folder for details, and for what system environment is required.

Caution:
You cannot use "B" marked and "unmarked" OPC-478UCs together with the Version 1.0F driver.

Note
File Size 4.82MB
File Type ZIP
Manual manual download page

Regarding this Download Service.

When using this download service, the implementation, use and/or results of use are the sole responsibility of the person making the download.

Firmware is important data for the basic system control of your equipment. An interruption during downloading or a malfunction may cause a failure in the data re-writing, and your equipment may stop functioning normally. If such a failure of the firmware re-writing results in your equipment not functioning normally, Icom Inc. expressly denies and is free from any and all responsibility arising from the result of damage from such an event.

I fully understand the above, and agree not to hold Icom Inc. responsible for any damage to my equipment operation or loss of data as a result of this download.