Weather Resistance for Outdoor Use
Icom's weatherproof cutting stickers are designed to resist water and harsh outdoor conditions without peeling off. These stickers are ideal for use on vehicles, motorcycles, outdoor equipment, and more.
Striking Large Size
A large sticker, measuring 256 × 126.8 mm, 10.1 × 5.0 inch (W × H) catches the eye even from a distance. They are an excellent choice for adding a distinctive touch to everyday items like carry bags, making them stand out with a Icom logo.
Application Instructions
1. Clean off any dirt of the surface before applying the sticker.
2. Peel off a little of the top layer at the margin of the logo and temporarily fix it in place while adjusting the position.
3. Slowly peel off the backing paper so that the cutting sticker remains on the top layer sheet side.
4. Attach the top layer sheet without wrinkles, pressing firmly from the top to remove any air bubbles under the cutting sticker.
5. Finally, remove the top layer to complete the process.
| Logo size (W x H) | 256 × 126.8 mm, 10.1 × 5.0 inch |
|---|---|
| Backing paper size (W x H) | 271 × 132.8 mm, 10.7 × 5.2 inch |
| OPP bag size (W x H) | 272 × 140 mm, 10.7 × 5.5 inch |
| Country of Origin | Japan |
| Color |
Black |
Catalogs / Brochures
| Brochures Name | Size |
|---|---|
| Weather Resistant Sticker | 596KB |
CloseCloseIngress Protection (IP) Code
Ingress Protection (IP) ratings define the level of protection provided by enclosures to prevent the ingress of foreign objects (dust) and liquid into the electrical equipment.
International Standard IEC 60529 outlines an international classification system that describes the sealing characteristics of electrical equipment.
The classification system uses the “IP” code, or “Ingress Protection” code, to define the level of seal.
An IP number contains two numbers (i.e. IP67) in most instances which relate to the level of protection provided by an enclosure or housing.
Either number may be shown as “X” (i.e. IPX6 / IP7X) to indicate the “X” part is not tested.
Degrees of Solid Particle Protection – 1st Digit
| IP6x | No ingress of dust; complete protection against contact. (Dust tight) |
|---|---|
| IP5x | Protected from the amount of dust that would interfere with normal operation. (Dust protected) |
Degrees of Liquid Ingress Protection – 2nd Digit
| IPx8 | Protected against continuous immersion in water. Depth and duration specified by model. |
|---|---|
| IPx7 | Protected against temporary immersion in water for 1 m (3.3 ft) for 30 minutes |
| IPx6 | Protected against water projected by powerful jets from any direction. 100 L per minute by a powerful jets (12.5 mm) for 3 minutes. |
| IPx5 | Protected against water projected by jets from any direction. 12.5 L per minute by a nozzle (6.3 mm) for 3 minutes. |
| IPx4 | Protected against water splashed against the equipment from any direction |
