Simple Operation for Instant Communication
The IC-F3001 series is so easy to use there's no special training required. The few knobs and buttons are generously sized for easy operation and are designed to provide non-slip, positive action – even while wearing gloves.
Easy to Hear in Noisy Areas
The built-in bridge-tied load (BTL) amplifier offers powerful 800mW* audio output from the large 45mm speaker. The radio delivers loud and intelligible audio even in noisy environments.
* Typical with internal speaker
Longer Operating Time
A new high efficiency FET of the IC-F3001 series reduces consumption current and provides 20 hours* of operating time with the BP-265, 2000 mAh (typ.) battery pack.
*Tx:Rx:Standby=5:5:90. Power save function ON.
Weather Resistant, Dust Protection, Military Rugged
While the radio is a compact unit with a height of only 111mm (43/8 inch), the radio is tested to dust protection and water resistant equivalent to IP54 and 11 categories of MIL-STD-810 environmental test. In short, the IC-F3001 series is built rugged!
Internal VOX Capability for Hands-Free Operation
The radio has the internal VOX capability for hands-free operation. Optional compatible headset with plug adapter cable OPC-2004LA can be used with the radio. Also, the VOX gain and VOX delay time are adjustable.
Selective Calling, Quiet Stand-by and More
2-Tone and 5-Tone signalings give you selective calling, quiet stand-by and other convenient functions with programming. The radio “stun” function disables a radio over the air and the “revive” function restores the stunned radio.
Scan Features
The priority scan allows you to monitor one or two priority channels while scanning other non-priority channels. The Tx channel and talk back functions allow you to make a quick response while scanning.
Other Features
- DTMF autodial
- CTCSS/DTCS encoder/decoder
- BIIS PTT ID transmission
- MDC PTT ID and emergency
- Low battery alert
- 2-step power save
- PC programmable
- Time out timer
- Talk around function
- Lone worker function
- Enhanced emergency
- 3-color LED
- Surveillance function
General
| IC-F3001 | IC-F4001 | |||
|---|---|---|---|---|
| Frequency range (Varies according to version) |
136MHz–174MHz |
400MHz–470MHz |
||
| Number of memory channels |
16 channels |
|||
| Channel spacing (Varies according to version) |
12.5kHz/25kHz* |
12.5kHz/25kHz* |
||
| Type of emission |
11K0F3E/16K0F3E* |
|||
| Current drain | Tx |
1.3A |
||
| Rx | Stand-by |
75mA |
70mA |
|
| Max. audio |
330mA (Internal SP) |
|||
| Dimensions (W×H×D) (Projections are not included) |
58×111×35.5mm; |
|||
| Weight |
270g; 9.5oz (With BP-265) |
|||
*25 kHz bandwidth is no longer available for FCC Part 90 licensees for USA versions.
Transmitter
| IC-F3001 | IC-F4001 | |
|---|---|---|
| RF output power (at 7.2V DC) |
5W, 2W, 1W |
4W, 2W, 1W |
| Spurious emissions |
70dB min. |
|
| Frequency stability |
±2.5ppm |
|
| Audio harmonic distortion (W/N) |
1.0%/1.5% (typ.) |
|
| FM Hum and Noise (W/N) |
46dB/40dB (typ.) |
|
Receiver
| IC-F3001 | IC-F4001 | ||
|---|---|---|---|
| Sensitivity at 12dB SINAD |
0.25μV (typ.) |
||
| Adjacent channel selectivity (W/N) |
78dB/70dB (typ.) |
73dB/65dB (typ.) |
|
| Spurious response rejection |
70dB (min.) |
||
| Intermodulation rejection |
75dB (typ.) |
74dB (typ.) |
|
| AF output power (at 5% distortion ) |
Internal SP (With 12Ω load) |
800mW (typ.) |
|
| External SP (With 8Ω load) |
400mW (typ.) |
||
Applicable U.S. Military Specifications
Icom makes rugged products that have been tested to and passed the following MIL-STD requirements and strict environmental standards.
| Standard |
MIL-810 F | |
|---|---|---|
| Method | Procedure | |
| Low Pressure Storage |
500.4 |
I |
| Low Pressure Operation |
500.4 |
II |
| High Temperature Storage |
501.4 |
I |
| High Temperature Operation |
501.4 |
II |
| Low Temperature Storage |
502.4 |
I |
| Low Temperature Operation |
502.4 |
II |
| Temperature Shock |
503.4 |
I |
| Solar Radiation |
505.4 |
I |
| Rain Blowing |
506.4 |
I |
| Rain Drip |
506.4 |
III |
| Humidity Induced |
507.4 |
– |
| Salt Fog |
509.4 |
– |
| Dust Blowing |
510.4 |
I |
| Vibration |
514.5 |
I |
| Shock Functional |
516.5 |
I |
| Shock Transit Drop |
516.5 |
IV |
Also meets equivalent MIL-STD-810 -C, -D and -E.
Ingress Protection Standard
| Dust & Water |
IP54 (Dust-protection and water resistant) |
|---|
All stated specifications are subject to change without notice or obligation.
Supplied Accessories
- BP-265, Battery pack
- BC-193, Batetery Charger
- BC-123SA, AC adapter
- Antenna
- Belt clip
MICROPHONES
HEADSETS
PTT/VOX CABLES
BATTERIES
CHARGERS
POWER SUPPLY CABLES
MOUNTING BRACKETS
ANTENNAS
Catalogs / Brochures
| Brochures Name | Size |
|---|---|
| IC-F3001/IC-F4001 | 299KB |
| Business Radio Solutions (USA Edition) | 12.70MB |
Instruction Manual / Guides
| Name | Model Name | Note |
|---|---|---|
| Instruction manual | IC-F3000 series, IC-F4000 seires | |
| Instructions | IC-F3001, IC-F4001 |
CloseCloseIngress Protection (IP) Code
Ingress Protection (IP) ratings define the level of protection provided by enclosures to prevent the ingress of foreign objects (dust) and liquid into the electrical equipment.
International Standard IEC 60529 outlines an international classification system that describes the sealing characteristics of electrical equipment.
The classification system uses the “IP” code, or “Ingress Protection” code, to define the level of seal.
An IP number contains two numbers (i.e. IP67) in most instances which relate to the level of protection provided by an enclosure or housing.
Either number may be shown as “X” (i.e. IPX6 / IP7X) to indicate the “X” part is not tested.
Degrees of Solid Particle Protection – 1st Digit
| IP6x | No ingress of dust; complete protection against contact. (Dust tight) |
|---|---|
| IP5x | Protected from the amount of dust that would interfere with normal operation. (Dust protected) |
Degrees of Liquid Ingress Protection – 2nd Digit
| IPx8 | Protected against continuous immersion in water. Depth and duration specified by model. |
|---|---|
| IPx7 | Protected against temporary immersion in water for 1 m (3.3 ft) for 30 minutes |
| IPx6 | Protected against water projected by powerful jets from any direction. 100 L per minute by a powerful jets (12.5 mm) for 3 minutes. |
| IPx5 | Protected against water projected by jets from any direction. 12.5 L per minute by a nozzle (6.3 mm) for 3 minutes. |
| IPx4 | Protected against water splashed against the equipment from any direction |
