144, 430 and 1200 MHz All Mode Transceiver
Including Satellite, DV, and DD Modes
The IC-9700 is an all mode Tri-band transceiver, covering 2 m, 70 cm, and 23 cm. In addition to the traditional SSB, AM, FM, CW, and RTTY modes, the transceiver also incorporates D-STAR (Digital Smart Technology for Amateur Radio) DV and DD modes. A full featured Satellite mode is built-in! There are three antenna connectors, one each for 144, 430 and 1200 MHz.
The Icom’s Digital Expertise
RF Direct Sampling, for 144 MHz and 430 MHz, is utilized in the IC-9700. For 1200 MHz, the Down Conversion IF Sampling method is adopted. In this system, signals are digitized by the ADC and processed in the FPGA. The signals are processed in the digital domain, thus eliminating distortion and other nonlinear elements seen in the legacy superheterodyne receivers. The outcome is that the signal purity is very high, and clear audio can be generated.
Intuitive Touch Screen Display
The beautifully designed MENU screens enable you to navigate settings and functions with a simple touch. The expanded menu provides quick access to the Satellite and D-STAR functions. Additionally, a touch on-screen keyboard is available for entering alphanumeric memory channel names.
One-Touch FT8 Mode Preset
Preset memory offers smooth FT8 mode operation. You can start FT8 mode operation only by selecting [FT8] from PRESET menu. Up to five preset memories can be stored.
Real-Time Spectrum Scope and Waterfall Display
This is the first time for an Icom VHF/UHF transceiver to have a real-time spectrum scope and waterfall display comparable to an HF high tier transceiver. With the high-speed spectrum scope, you can instantly see the operating band condition. With a simple touch of the scope, you can tune the radio to the desired signals frequency. You can also view the receive signal history using the waterfall display.
Scroll mode automatically keeps the operating signal within the scope range.
Independent Receiver, Full Duplex Operation
The IC-9700 can simultaneously receive on two different bands, and two different modes. For example, you can receive on the 1200 MHz band in the SSB mode while receiving on the 144 MHz band in the FM mode. This function can be a significant advantage when participating in contests or searching for weak signals. Furthermore, the IC-9700 is Full Duplex, which enables you to transmit on the main band while receiving on the sub band.
Audio Scope Function
Making good use of the Audio Scope function, various audio characteristics, such as microphone compressor level, filter width, notch filter width, and keying waveform in the CW mode can be monitored. Transmit or receive audio can either be displayed on the FFT scope and the oscilloscope.
Newly Designed Power Amplifier
The power amplifier outputs stable power with high efficiency (144/430 MHz band: 100/75 watts). The cooling system prevents the PA from overheating, even when operating for a long time. That ensures reliable operation during contests. This amplifier is more energy efficient than previous models.
D-STAR Operation Friendly Functions
The IC-9700 has the D-STAR Repeater (DR) function that has been well received by D-STAR enthusiasts. The DR function can be used on both the Main and Sub bands simultaneously to listen to two separate DV signals. Moreover, by using the DD mode, you can browse the Internet through a repeater station.
D-STAR System Introduction
Find the D-STAR system introduction and features from here.
Built-in DV Gateway Functions
A static IP address can be set to the transceiver. If you set a global IP address to your router, you can use the Terminal mode or Access Point mode without any software applications.
■ Connection example (AP mode)
Almost Identical User Interface to the IC-7300
The layout of the dials and keys, and the menu screens are almost the same as the IC-7300. If you are familiar with the IC-7300, you can operate the IC-9700 without hesitation. The IC-9700 is the perfect side-by-side companion to the IC-7300, enabling operations from HF to the 1200 MHz.
Comprehensive Menus for Satellite Operation
The IC-9700's Satellite mode makes Satellite operation very easy. Even in the Satellite mode, you can use the high-quality spectrum scope.
Normal and Reverse Tracking Functions
In addition to the Reverse Tracking function there is also a Normal Tracking function. Both functions simultaneously increase or decrease both the downlink and uplink frequencies in the same steps.
Automatic Frequency Control follows the frequency change caused by the Doppler effect, thus maintaining a stable receive condition.
Up to 99 Satellite Memory Channels
The IC-9700 has 99 satellite memory channels that enable you to store both uplink and downlink frequencies and operating mode. By just selecting a satellite memory channel, all of your satellite settings are completed.
UDP Hole Punch Function
The UDP Hole Punch function enables Access Point mode or Terminal mode communication (limited function), even if you cannot forward port 40000, or a Global IP address is not assigned to your device. This function is convenient when you are using a free Wi-Fi hotspot.
- When using the IC-9700 Internal Gateway function, IC-9700 version 1.10 or later is required.
- When using an application software, RS-MS3W/RS-MS3A version 1.30 or later is required.
- You can communicate with individual stations, or stations that are listening to a repeater, whichever you set in Â“TO.Â” Once your transmit signal passes through a punched port, a reply (receive) signal can pass back through the port.
- You cannot hear calls from stations that initiate a call to you.
- See the RS-MS3W or RS-MS3A instruction manuals for precautions and setting details.
Send, receive and show pictures, the IC-9700 does it all
Pictures stored on your smartphone or other device can be sent through the IC-9700. Using the ST-4001A/I/W picture utility software, you can select a picture to be sent, and then transfer it to the IC-9700 through a LAN. The IC-9700 does the rest. Image data is transmitted during voice communication, or transmitted in the DV fast data mode, by pressing a button on the display, too. The IC-9700 can also show the received picture on its LED display.
Picture Utility Software
|<ST-4001A> for Android:||Download free on Google Play|
|<ST-4001I> for iOS:||Download free on App Store|
|<ST-4001W> for Windows:||Download free on the Icom website|
For Android: Version 5.0 or later
For iOS: 12 or later / For iPadOS: 13 or later
For Windows: Either 32 or 64 bit versions of Microsoft Windows 7, 8.1 or 10
- Loud and clear audio
- Compatible with the RS-BA1 Version 2 and CI-V commands
- Built-in server function
- Digital Twin PBT
- CW functions:Full break-in, CW memory keyer, CW reverse, CW auto tuning
- SD card slot
- TX/RX audio recording
- Screen capture ...and more.
Rear Panel View
|Frequency coverage||<EUR version>||144.000–146.000, 430.000–440.000, 1240.000–1300.000 MHz|
|<ITR version>||144.000–146.000, 430.000–434.000, 435.000–438.000,
1240.000–1245.000, 1270.000–1298.000 MHz
|Mode||SSB, CW, RTTY, AM, FM, DV, DD|
|Number of memory channels||
Simplex: 297 (99 channels × 3 bands),
|Antenna connectors||144 MHz SO-239,
430/440, 1200 MHz Type-N
|Power supply requirement||13.8 V DC ±15% (Negative ground)|
|Power consumption||Tx||Less than 18 A (High power)|
|Rx||1.2 A typical (Standby),
Less than 1.8 A (Maximum audio)
|Operating temperature range||−10 °C to +60 °C; 14 °F to 140 °F|
|Frequency stability||Less than ± 0.5 ppm
(–10°C to +60°C; 14°F to 140°F)
|Frequency resolution||1 Hz|
(W × H × D, projections not included)
|240 × 94 × 238 mm,
9.4 × 3.7 × 9.4 in
|Weight (approximately)||4.7 kg, 10.4 lb|
144 MHz: 0.5–100 W
430/440 MHz: 0.5–75 W
1200 MHz: 0.1–10 W
144 MHz: 0.125–25 W
430/440 MHz: 0.125–18.75 W
1200 MHz: 0.025–2.5 W
Digital PSN modulation
Digital Low Power modulation
Digital Reactance modulation
Digital GMSK modulation
|Carrier suppression||More than 50 dB|
|Unwanted sideband||More than 50 dB|
|Receiver system||144, 430/440 MHz RF Direct Sampling
1200 MHz Down Conversion IF Sampling
(1200 MHz band)
|311–371 MHz (EUR)
311–316, 341–369 MHz (ITR)
(Preamp: ON, Filter: SOFT)
|SSB/CW (10dB S/N)
Less than 0.11 μV
AM (10dB S/N)
Less than 1.0 μV
FM (12 dB SINAD)
Less than 0.18 μV
DV (1% BER) (PN9)
Less than 0.35 μV
DD (1% BER) (PN9) (1200 MHz only)
Less than 1.59 μV
|Sensitivity for RED (Less than)
SSB, AM, FM: at 12 dB SINAD
|SSB/CW (2.4 kHz): 0.5 μV
AM (4 kHz, 60% modulation): 1.0 μV
FM (7 kHz, 60% modulation): 0.5 μV
|SSB (BW=2.4 kHz)
More than: 2.4 kHz/-3 dB
Less than: 3.6 kHz/-60 dB
CW (BW=500 Hz)
More than: 500 Hz/-3 dB
Less than: 700 Hz/-60 dB
RTTY (BW=500 Hz)
More than: 500 Hz/-3 dB
Less than: 700 Hz/-60 dB
AM (BW=6 kHz)
More than: 6 kHz/-3 dB
Less than: 15 kHz/-60 dB
FM (BW=15 kHz)
More than: 12 kHz/-6 dB
Less than: 20 kHz/-60 dB
DV (12.5 kHz spacing)
Less than: -50 dB
DD (300 kHz spacing)
Less than: -40 dB
|Spurious and image rejection ratio||144, 430/440MHz:
SSB/CW: More than 70 dB
AM/FM/DV: More than 60 dB
SSB/CW: More than 50 dB
AM/FM/DV: More than 50 dB
DD: More than 50 dB
|Audio output power:||More than 2.0 W (1 kHz, 10% distortion) into an 8Ω load|
All stated specifications are subject to change without notice or obligation.
- HM-219 hand microphone
- DC power cable
Catalogs / Brochures
Instruction Manual / Guides
|MANUEL DE BASE||IC-9700|
|MANUALE DI BASE||IC-9700|
|CI-V REFERENCE GUIDE||IC-9700|
|Firmware Update Information||IC-9700|
|DOC (DECLARATION OF CONFORMITY)||IC-9700|
|DICHIARAZIONE DI CONFORMITA UE (ITALIANO)||IC-9700|
|About the Share Pictures function||IC-9700/IC-705|
|About the UDP Hole Punch function||ID-51A (PLUS2)/ID-51E (PLUS2) /ID-31A PLUS/ID-31E PLUS/ID-4100A/ID-4100E/IC-9700|
|D-STAR Application Guide||ID-52A/ID-52E/IC-705/IC-9700/IC-7100/ID-4100E/ID-4100A/ID-5100E/ID-5100A/ID-51E/ID-51A/ID-31E/ID-31A/ID-31E PLUS/ID-31A PLUS/RS-MS1A/RS-MS1I/RS-MS3A/ST-4001A/ST-4001I|
|D-STAR Updating the repeater list||ID-52E/ID-52A/IC-705/IC-9700/IC-7100/ID-4100E/ID-4100A/ID-5100E/ID-5100A/ID-51E/ID-51A/ID-31E/ID-31A/ID-31E PLUS/ID-31A PLUS|
|Installation Guide for Windows 11/10/8.1 USB3.0 Supported||USB Driver (Ver.1.30) CS-7100/CS-9100/CS-9700/CS-R8600/IC-7300/RS-BA1/RS-R8600|
Firmware / Software
|Type||Model Name||Version||Last Update|
|Programming software||CS-9700||Version 1.31||2021.07.09|
|USB Driver||IC-7100/IC-7200/IC-7300/IC-7410/IC-7600/IC-7610/IC-7850/IC-7851/IC-9100/IC-9700/IC-R8600||Version 1.30||2018.06.07|
|Repeater List, GPS Data||IC-9700||20190315||2019.05.23|
|Control software||RS-BA1 Version 2||Version 2.41||2021.12.24|
|Picture Utility Software||ST-4001W||Version 1.00||2020.01.27|
|Time adjustment software||ST-4003W||Version 1.00||2021.11.30|
Ingress Protection (IP) Code
Ingress Protection (IP) ratings define the level of protection provided by enclosures to prevent the ingress of foreign objects (dust) and liquid into the electrical equipment.
International Standard IEC 60529 outlines an international classification system that describes the sealing characteristics of electrical equipment.
The classification system uses the “IP” code, or “Ingress Protection” code, to define the level of seal.
An IP number contains two numbers (i.e. IP67) in most instances which relate to the level of protection provided by an enclosure or housing.
Either number may be shown as “X” (i.e. IPX6 / IP7X) to indicate the “X” part is not tested.
Degrees of Solid Particle Protection – 1st Digit
|IP6x||No ingress of dust; complete protection against contact. (Dust tight)|
|IP5x||Protected from the amount of dust that would interfere with normal operation. (Dust protected)|
Degrees of Liquid Ingress Protection – 2nd Digit
|IPx8||Protected against continuous immersion in water.
Depth and duration specified by model.
|IPx7||Protected against temporary immersion in water for 1 m (3.3 ft) for 30 minutes|
|IPx6||Protected against water projected by powerful jets from any direction.
100 L per minute by a powerful jets (12.5 mm) for 3 minutes.
|IPx5||Protected against water projected by jets from any direction.
12.5 L per minute by a nozzle (6.3 mm) for 3 minutes.
|IPx4||Protected against water splashed against the equipment from any direction|